Parts for Husqvarna 917384590: Engine / Housing / Handle Parts

This bail control arm is a genuine Husqvarna part, sold individually. This bail control arm can be used as a replacement part for a lawnmower. This bail control arm works in conjunction with the handle so that when the operator pulls the bar, the engine is started and when the bar is released, the engine stops.The bail control arm might have to be replaced if it no longer serves its function for a lawnmower. This could occur if the bail control arm is damaged as a result of general wear and tear over long-term usage or from a direct impact that warps the component. If the engine does not engage when the bail control arm is pulled or the engine remains powered on when the arm is released, the component should be replaced by this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This bail control arm is compatible with the following outdoor appliance brands: Husqvarna and Poulan.

This is a handle knob for many brands of lawnmowers, snowblowers, or trimmers. It attaches to the upper or lower handle on adjustment levers. This genuine OEM handle knob is a frequently lost or broken component as it is on the exterior of the machine, used frequently, and often struck during use. It will need to be replaced if it becomes wobbly or refuses to remain firmly in place. The only tools required to install the authentic replacement part will be a rubber mallet and a 1/16 punch. It is threaded to easily install once the cap has been removed with the punch. Made of durable materials, it ships individually but may require the use of a handle bolt depending upon the machine it is being used to repair. It works on rotary lawnmowers as well as manually and self-propelled models from brands like Husqvarna, Poulan, Weed Eater, Ryobi, Murray, and Craftsman, among others.

This is a rear baffle for walk-behind mowers. The baffle attaches to the rear portion of the mower's deck. The purpose of the part is to restrict the flow of debris when the user is mowing the lawn. This will also serve to focus the water flow when washing the inside of the mower deck. If the baffle is not functioning properly, the clippings and debris will not flow properly from the machine and could get caught under the deck.The rear baffle is made from durable plastic. However, it could be damaged while the owner is mowing the lawn. Over time, it can wear down and break. Regardless, the owner will want to replace it. Replacing the baffle is relatively easy and should not take the owner long.The rear baffle is compatible with select mowers from Jonsered, Husqvarna, and Poulan. It is sold individually. It is an authentic OEM replacement part.

This is a grass catcher frame that secures the grass catcher bag to the body of the mower. Mowers are twisted, lifted, and banged constantly, so a frame may become warped beyond use. If so, this OEM manufactured part is the solution. The replacement is an easy fix and should require less than 15 minutes and doesn’t require any tools. Simply remove the grass bag from the old frame, noting how the bag fit. Slide the new frame inside the bag. It should fit snugly with no undue tautness or slack. To make certain the frame was properly introduced into the bag, attach the frame to the mower. If the frame fits securely against the cowling of the mower, then the bag and frame have been fitted properly together. This grass catcher frame was designed specifically for Husqvarna and Poulan lawnmowers, though there are also a number of Craftsmen mowers on which this frame can be installed. This OEM part is sold individually. Bag sold separately.

This part is a replacement handle bracket assembly. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective handle bracket assembly in lawn mowers.This handle bracket assembly allows the lawn mower handle to be securely fixed in place so it doesn't move. If the lawn mower handle is not secured or moves during operation, it may be difficult for the user to properly maneuver the mower. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this handle bracket, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this handle bracket assembly is suitable for use on several models of lawn mowers manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This hinge rod is a genuine Husqvarna part, sold individually. This hinge rod can be used as a replacement part in a lawnmower. The purpose of a hinge rod in a lawnmower is to affix to the discharge chute so that the chute has a range of motion while remaining attached to the appliance to fulfill its function.The hinge rod in a lawnmower might have to be replaced if it is damaged. The hinge rod could be punctured, scraped, dented, cracked, or eroded to the point that the hinge rod can no longer affix to the discharge chute or that the component is loosened to the point that a repair cannot fix it. If this occurs, the hinge rod should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This hinge rod is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Ariens, Murray, and Poulan.

This is a lawn mower blade adapter that will work with a range of mowers. The blade adapter is a part of the mower deck that helps to attach the blade. If the blade adapter has gone bad or is damaged, it can cause the blade to vibrate. If the adapter is severely damaged, the blade may not stay on the mower. It has the potential to be very dangerous. Replace the adapter right away if it is not working properly.The blade adapter is made from durable metal, and it should last a long time. However, there is a chance it could become damaged while mowing the lawn or due to corrosion. It is an easy repair to make, and owners can replace the adapter on their own in less than 10 to 15 minutes in most cases.The blade adaptor will work with select mower models from Craftsman and Husqvarna. The part is sold individually, and it is a genuine OEM replacement part sourced from the manufacturer.

This is a four-in-one blade that is used for push mowers from several manufacturers. It is used for shredding and mulching leaves. This provides users with more options when cutting the grass on their lawns. If the blade is not working properly, it will limit the functionality of the mower.The metal blade on a mower is durable and meant to last. However, accidents such as running over stumps or rocks could cause the blade to bend or break. Older blades could become worn down and chipped. In some cases, the metal may even begin to corrode. Regardless of what causes the damage, owners need to change the blade out when it no longer works correctly. When replacing the part, users should wear work gloves to protect their hands. This blade works for certain models of push mowers from Husqvarna and Jonsered. It is sold individually and is a genuine OEM replacement blade sourced from the manufacturer.

This replacement part is a bolt, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. Bolts are found in different places inside many devices. This part is essential to the overall operation of many machines. This specific one is intended for lawn mowers and assists the overall device in working properly.A new bolt might be needed if the current one is damaged or missing. It is possible that the bolt can become stripped or damaged overtime, and should be replaced if this is the case. Be sure to reference the specific owner's manual for more information on how to replace or install this bolt. This is a single bolt. Be sure to purchase the correct amount as many machines require more than one to operate. This is a genuine OEM replacement part sourced directly from the manufacturer.

This replacement part is a bolt and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A bolt is a small but important part in many tools. These parts are able to hold different areas of machinery together so that the different areas of the device stay secure and steady. A new bolt might be needed if the current ones are missing or damaged. If parts on the appliance are falling off or are loose, the user should look into replacing a bolt. To replace a bolt or many bolts, the user must have access to common household tools. Simply remove the old one and use a screwdriver to replace it with a new part. Reference the specific user manual for further directions. This bolt is sold individually and is an OEM replacement part. Note that some devices require more than one screw so be sure to purchase the correct amount.

This flange nut can be used as a replacement part for snowblowers, lawnmowers, and tillers. Flange nuts fasten materials to one another in conjunction with a bolt. A flange nut is different from a regular nut in that it features a protruded flange on its end that functionally serves as a washer, negating the need for a separate washer part. A flange nut might have to be replaced for several reasons, including the part going missing, which is a frequent occurrence as it is small and does not necessarily cause any immediate damage if it is lost. Additionally, a flange nut can be subject to damage over time through general wear and tear, overuse, punctures, piercings, scrapes, or erosion to the metal material. Such damage can hamper its ability to fasten materials together. If this is the case, a replacement flange nut should be ordered. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This flange nut is a genuine OEM Husqvarna part, sold individually. It compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Craftsman.

The replacement handle bolt here can be used for lawn and garden equipment. The handle bolt is used with the handle knob to help secure the upper and lower handles of the machine together. If the bolt is damaged or missing, it will not be possible to secure the handles properly. The handle bolts are durable and made from metal, but they could become damaged due to corrosion or natural wear. In other cases, they could become lost. In either case, they will need to be replaced. The replacement is simple and will not require any tools, as the square part of the bolt will fit into the handle perfectly. The handle knob will then be used to keep it in place. The handle bolt is a genuine OEM Part for lawn mowers and snowblowers. It is compatible with some models from Husqvarna, Murray, Weed Eater, Poulan, Jonsered, Craftsman, and Ryobi. It should be noted that this product is sold individually, and the handle knob is not included.

This replacement part is a cover assembly. This is a genuine replacement part made by Husqvarna. Cover assemblies are common in lawnmowers and are used to keep the parts inside the machine safe from outside debris. The covers also ensure the safety of the user as many parts inside can be dangerous if exposed to.A new cover assembly might be needed if the current one is damaged in any way including being dented, cracked, chipped, or bent. This can be from normal wear and tear as well as from flying debris over time. Be sure the engine is completely shut down before attempting this repair. Work gloves are also recommended for this job.This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This cover assembly is a genuine OEM replacement part.