Parts for Husqvarna 96145002302: Engine / Housing / Handle Parts

This part is a replacement zone control cable. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a defective or broken zone control cable in a variety of lawn mower models. The zone control cable is essential to safe use of the mower as it stops the engine should the user let go of the handle. This part will require replacing if stretched, snapped, or rendered ineffective. When working on or near an enginee, it is important to ensure the equipment is powered down and completely cool before beginning repairs. For more accurate information on how and where to place this zone control cable, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this zone control cable is suitable for use on lawn mowers manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This part is an ergonomic bail arm assembly that is used on lawnmowers. The bail arm is a bar that the operator must squeeze in order to engage the mower. When the operator releases his or her grip on the bar, the lawnmower will shut off.A new ergonomic bail arm assembly may be needed if the original is cracked, broken, bent, or damaged in any way. The ergonomic bail arm assembly may become worn due to normal wear and tear over a period of time. If this is the case, this part will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This ergonomic bail arm assembly is a genuine Husqvarna part. It is sold individually. This particular ergonomic bail arm assembly is compatible with lawnmowers that are manufactured by Husqvarna.

This replacement part is a door assembly. This is a genuine replacement part made by Husqvarna. Door assemblies are commonly used in lawnmowers and help keep parts inside and secure during use. The door function allows the user to access the parts inside easily when needed.A new door assembly might be needed if the current one is missing or damaged in any way. This can include being dented, cracked, chipped, or bent in a way that the door will not stay closed. If this is the case it is recommended that the user replace the door as soon as possible to keep the inside parts clear of debris. Be sure the engine is completely powered down before starting this repair. This is a genuine OEM replacement part which ensures a proper fit. This part is sold individually and is sourced directly from the manufacturer.

This is a rear baffle for walk-behind mowers. The baffle attaches to the rear portion of the mower's deck. The purpose of the part is to restrict the flow of debris when the user is mowing the lawn. This will also serve to focus the water flow when washing the inside of the mower deck. If the baffle is not functioning properly, the clippings and debris will not flow properly from the machine and could get caught under the deck.The rear baffle is made from durable plastic. However, it could be damaged while the owner is mowing the lawn. Over time, it can wear down and break. Regardless, the owner will want to replace it. Replacing the baffle is relatively easy and should not take the owner long.The rear baffle is compatible with select mowers from Jonsered, Husqvarna, and Poulan. It is sold individually. It is an authentic OEM replacement part.

This replacement part is a bolt. This is a genuine replacement part made by Husqvarna. This part is small but very important in many machines and devices. The bolt itself is able to hold things in place, similar to a screw or nut. A new bolt might be needed if the current one is missing or damaged in any way. This can include being dented, stripped, or lodged in place. The repair should be fairly easy and might only require household tools. If the previous bolt is lodged in place the user might need pliers to retrieve it. Be sure to wear work gloves during this repair. It is also recommended that the machine be completely powered down before replacing this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

This genuine Husqvarna replacement part is a grass bag, also known as a grass catching bag. It is for use with walk-behind lawn mowers.This part is connected to the rear of the mower, where it can collect grass clippings during operation of the mower. Through extended use of the lawn mower, the grass bag can easily wear out or become frayed, rendering it ineffective. Regular checks of the grass bag are recommended to spot any damage.This grass bag is an identical replacement for a bag that is missing, worn out, damaged, or missing. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and is sold individually. This part is compatible with a variety of Husqvarna lawn mowers. Please note: original part number 580943404 is now obsolete, and manufacturer has replaced the original part number with this part.

This is a grass catcher frame that secures the grass catcher bag to the body of the mower. Mowers are twisted, lifted, and banged constantly, so a frame may become warped beyond use. If so, this OEM manufactured part is the solution. The replacement is an easy fix and should require less than 15 minutes and doesn’t require any tools. Simply remove the grass bag from the old frame, noting how the bag fit. Slide the new frame inside the bag. It should fit snugly with no undue tautness or slack. To make certain the frame was properly introduced into the bag, attach the frame to the mower. If the frame fits securely against the cowling of the mower, then the bag and frame have been fitted properly together. This grass catcher frame was designed specifically for Husqvarna and Poulan lawnmowers, though there are also a number of Craftsmen mowers on which this frame can be installed. This OEM part is sold individually. Bag sold separately.

This replacement part is a bolt and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A bolt is a small but important part in many tools. These parts are able to hold different areas of machinery together so that the different areas of the device stay secure and steady. A new bolt might be needed if the current ones are missing or damaged. If parts on the appliance are falling off or are loose, the user should look into replacing a bolt. To replace a bolt or many bolts, the user must have access to common household tools. Simply remove the old one and use a screwdriver to replace it with a new part. Reference the specific user manual for further directions. This bolt is sold individually and is an OEM replacement part. Note that some devices require more than one screw so be sure to purchase the correct amount.

This part is a replacement handle bracket assembly. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective handle bracket assembly in lawn mowers.This handle bracket assembly allows the lawn mower handle to be securely fixed in place so it doesn't move. If the lawn mower handle is not secured or moves during operation, it may be difficult for the user to properly maneuver the mower. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this handle bracket, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this handle bracket assembly is suitable for use on several models of lawn mowers manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This hinge rod is a genuine Husqvarna part, sold individually. This hinge rod can be used as a replacement part in a lawnmower. The purpose of a hinge rod in a lawnmower is to affix to the discharge chute so that the chute has a range of motion while remaining attached to the appliance to fulfill its function.The hinge rod in a lawnmower might have to be replaced if it is damaged. The hinge rod could be punctured, scraped, dented, cracked, or eroded to the point that the hinge rod can no longer affix to the discharge chute or that the component is loosened to the point that a repair cannot fix it. If this occurs, the hinge rod should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This hinge rod is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Ariens, Murray, and Poulan.

The blades for a lawn mower are attached to the blade adapter and the spindle. It ensures that the blades are securely in place and that they will stay in place when mowing. It is not safe or effective to use a mower if there are issues with the adapter. Over time, many things could happen to the blade adapter that would require a replacement. In some cases, the adapter could be stripped, which would mean that the blades would then stop rotating properly. Damage from use and misuse can happen in some cases. Normal wear and tear will occur, as well, which can cause a blade to start vibrating and will cause problems with mowing. This metal replacement blade adapter is a genuine OEM part that will work for lawn mowers from several different brands. Compatible brands include Husqvarna, Jonsered, and Craftsman. Replacing the blade adapter will require a wrench.

This replacement part is a bolt and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A bolt is a small but important part in many tools. These parts are able to hold different areas of machinery together so that the different areas of the device stay secure and steady. A new bolt might be needed if the current ones are missing or damaged. If parts on the appliance are falling off or are loose, the user should look into replacing a bolt. To replace a bolt or many bolts, the user must have access to common household tools. Simply remove the old one and use a screwdriver to replace it with a new part. Reference the specific user manual for further directions. This bolt is sold individually and is an OEM replacement part. Note that some devices require more than one screw so be sure to purchase the correct amount.

This replacement part is a screw. This part is small but very useful in many kinds of machinery. This part connects components and ensures that they are secure.Screws may become stripped with overtightening, or corroded from exposure to the elements.This is a genuine replacement part made by Husqvarna. It is an OEM replacement part which will ensure a proper fit. This part is sold individually.

This flange nut can be used as a replacement part for snowblowers, lawnmowers, and tillers. Flange nuts fasten materials to one another in conjunction with a bolt. A flange nut is different from a regular nut in that it features a protruded flange on its end that functionally serves as a washer, negating the need for a separate washer part. A flange nut might have to be replaced for several reasons, including the part going missing, which is a frequent occurrence as it is small and does not necessarily cause any immediate damage if it is lost. Additionally, a flange nut can be subject to damage over time through general wear and tear, overuse, punctures, piercings, scrapes, or erosion to the metal material. Such damage can hamper its ability to fasten materials together. If this is the case, a replacement flange nut should be ordered. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This flange nut is a genuine OEM Husqvarna part, sold individually. It compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Craftsman.

The replacement handle bolt here can be used for lawn and garden equipment. The handle bolt is used with the handle knob to help secure the upper and lower handles of the machine together. If the bolt is damaged or missing, it will not be possible to secure the handles properly. The handle bolts are durable and made from metal, but they could become damaged due to corrosion or natural wear. In other cases, they could become lost. In either case, they will need to be replaced. The replacement is simple and will not require any tools, as the square part of the bolt will fit into the handle perfectly. The handle knob will then be used to keep it in place. The handle bolt is a genuine OEM Part for lawn mowers and snowblowers. It is compatible with some models from Husqvarna, Murray, Weed Eater, Poulan, Jonsered, Craftsman, and Ryobi. It should be noted that this product is sold individually, and the handle knob is not included.

This belt bracket is a genuine Husqvarna part, sold individually. This belt bracket can be used as a replacement part in a lawn mower. The purpose of the belt bracket in a lawn mower is to secure the drive belt within the appliance so that the belt can freely rotate and facilitate the driving of the appliance across a variety of surfaces.The belt bracket in a lawn mower will have to be replaced if it can no longer support and bolster the positioning of the drive belt. This could occur due to damage to the belt bracket after general wear and tear from long-term usage or as a result of an accidental collision with a hard object so as a rock or a curb. If this occurs, the belt bracket should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This belt bracket is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.