Parts for Husqvarna 967277501-01: Engine Mounting / Guards / Muffler Parts

This idler pulley is a genuine Husqvarna part, sold individually. This idler pulley can be used as a replacement part in a lawn mower. The purpose of the idler pulley in a lawn mower is to manage the rotation of the drive belt and support its placement within the appliance through the stable maintenance of tension on the belt. The idler pulley might have to be replaced at some point within the typical lifespan of a lawn mower if it can no longer serve its function of maintaining the motion and rotation of the drive belt. This could occur due to damage from general wear and tear with long-term use, from exposure to the elements, or due to an accidental collision with a hard object such as a rock or a curb. If this occurs, the idler pulley should be removed and replaced by this genuine OEM replacement part before using the lawn mower again.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This idler pulley is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This idler pulley is an authentic OEM replacement part sourced directly from the manufacturer. This pulley guides the drive belt on riding lawn mowers to turn the blades that cut the grass. If the pulley is not working properly, or if it seizes or is jammed, the blades will not turn to cut grass. This can happen if large objects are run over and become lodged under the deck. If the pulley comes in contact with large stationary objects like hidden rocks, it may be damaged and not work. The idler pulley will need to be replaced if the blades are not turning.Before replacing the pulley, make sure the mower is cool to touch and remove the spark plug. Ensure that the actuator is in the off position and lower the blade to make it easier to access the pulley. Wear safety gloves to prevent injury when working with the blades. Detach all retaining pins from the deck to release them from the mower. Remove the nut holding the pulley onto the shaft and then remove the pulley and install the new one. Reverse the process to reassemble the mower. This idler pulley is a solid metal part that is sold individually. It does not come with a bolt or nut. This idler pulley is designed for use in lawnmowers and lawn tractors manufactured by Husqvarna.

This part is a replacement ground drive belt. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, worn, or malfunctioning ground drive belt in a variety of lawn tractor models. The ground drive belt helps to drive the tractor by rotating the transmission pulley. If this part is worn, snapped, or otherwise defective, the tractor may be rendered unusable and this part should be replaced. When working on or near any engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this ground drive belt, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this ground drive belt is suitable for use on several different models of lawn tractors manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This is a replacement clutch. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a worn out or defective clutch on a variety of different lawnmower models. This particular part is a 200 ft- clutch.The clutch is responsible for transferring power generated by the transmission to drive the lawnmower's wheels. If the clutch malfunctions, the equipment may not be maneuverable. Access to proper tools is required for replacing this part. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this clutch, refer to the appropriate owner's manual and included diagrams.As an authentic replacement part, this clutch is suitable for use on several different lawnmower models manufactured by Husqvarna. This is a genuine part made of high-quality, durable materials and is sold individually.

This part is a twin-muffler assembly that is used on lawn tractors. A muffler assembly is a component on engines that have two cylinders. The purpose of the muffler is to reduce the noise and the emissions that are produced by the motor. This part also connects to the exhaust pipes.A new twin-muffler assembly may be needed if the original has become clogged and is no longer functioning correctly. Mufflers often need to be replaced within the lifespan of the tractor as they are susceptible to wear and tear. Make sure to allow the machine to cool down thoroughly prior to attempting to perform any repairs or replacements on the machine. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This twin-muffler assembly is a genuine Husqvarna part. It is sold individually. This particular twin-muffler assembly is compatible with lawn tractors that are manufactured by Husqvarna, Poulan, and Jonsered.

This exhaust pipe is a genuine Husqvarna part, sold individually. This exhaust pipe can be used as a replacement part in a lawn mower. The purpose of the exhaust pipe in a lawn mower is to redirect gases and combustion away from the appliance and from the operator.The exhaust pipe in a lawn mower might have to be replaced if it or any component near it shows signs of damage. Signs of damage to the exhaust pipe can include increased or unusual noise coming from the exhaust, reduced fuel economy, strong gasoline odor, hard starting or misfiring engine, or a burning smell from the exhaust. If any of these signs of damage occur, the exhaust pipe should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement sourced directly from the manufacturer. It is sold individually. This exhaust pipe is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

The starter solenoid, also called a starter relay, is a low-amperage relay that completes the high-amperage connection between the starter motor and the battery when the ignition key is turned. The starter solenoid is needed to engage the starter motor. When the ignition is turned on, the battery sends a small electrical charge to the starter solenoid. The solenoid shuts a switch, so a more significant amount of current is sent to the starter motor. The starter motor shaft starts to rotate and engage the teeth of the flywheel. The flywheel then turns the crankshaft to put the engine in motion. A bad solenoid can deny the flow of electricity to the starter motor and prevent engine startup. However, other underlying problems may also exist. The battery may be in good condition, but the engine is not cranking, or clicking and grinding noises may come from the solenoid. These are signs that the starter solenoid should be replaced. This starter solenoid is for use in riding lawn tractors and zero-turn riding mowers. It is compatible with specific models from different brands, including Ariens, Craftsman, Dixon, Husqvarna, Hyper Tough, Jonsered, Murray, Poulan Pro, Redmax, and Snapper. It is a genuine OEM replacement part sourced directly from the manufacturer and is sold individually.

This key is a genuine Husqvarna part, sold individually. This key can be used as a replacement part in a lawn mower. The key in a lawn mower is used to power on the appliance by fitting into the ignition system of the appliance and then allowing the mechanisms within the appliance to ignite the spark plugs and power on the engine.The key in a lawn mower might need to be replaced if it is lost, misplaced, or damaged to the point that it cannot be used to enter the ignition system and turn on the appliance. This could occur if the key has been dented, punctured, torn, warped, or eroded during the standard use of the appliance. If this occurs, or if the key has been lost, it should be replaced by this genuine OEM replacement part in order to use the appliance again. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This key is compatible with the following outdoor appliance brands: Husqvarna.

This bolt is a genuine Husqvarna part, sold individually. This bolt can be used as a replacement part in a lawn mower. The purpose of a bolt in a lawn mower is to fasten one or more components to each other so that, in conjunction with a nut, the components are safely secured during the typical operation of the appliance.The bolt in a lawn mower might have to be replaced at some point within the typical lifespan of the appliance in the case that the bolt cannot serve as a fastening component. This could occur as a result of general wear and tear from long-term usage or after a direct impact collision with a hard object that could knock out or warp the bolt beyond functionality. If this occurs, the bolt should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This bolt is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This replacement part is a flange nut. It is a genuine replacement part made by Husqvarna. This part is small yet extremely important to the operation of many different appliances and machines. Nuts are able to hold other parts in place and secure them tightly so that everything can operate smoothly and efficiently. A new flange nut might be needed if the current ones are damaged in any way or even missing. This repair should be fairly easy and only require a screwdriver or pliers if the previous part is lodged in place. It is possible that nuts can become stripped or stuck over time and should be replaced when and if this occurs. Be sure the engine is completely powered down before starting a repair. This part is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer.

This hex nut is a genuine Husqvarna part, sold individually. This hex nut can be used as a replacement part in a lawn mower. The purpose of the hex nut in a lawn mower is to secure a component to another component in conjunction with a bolt so that, during the standard operation of the lawn mower, the components do not move from their position of stable placement.The hex nut in a lawn mower is a small component, and its size means that it can be easily lost, misplaced, or stripped from general wear and tear with long-term use. The hex nut could also be damaged as a result of a collision with a hard object such as a rock or a curb. If any of this occurs, the hex nut should be replaced by this genuine OEM replacement part as soon as possible.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This hex nut is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Weed Eater.