Parts for Cub Cadet 41ADC75C010: Engine Parts

This is a replacement for the primer bulb on select MTD engines for lawn and garden equipment. The primer bulb is responsible for helping force fuel into the carburetor to initialize starting when the engine has been sitting. The bulb is made of a durable rubberized material, but it can become cracked, worn, or otherwise damaged over time. This will require a replacement of the bulb to ensure that the internal primer mechanism is protected from the elements. This genuine OEM primer bulb offers an exact fit for several engines manufactured by MTD. It is a standard size primer bulb and sold as an individual unit. No other parts or accessories are included. Replacing this bulb does not require any tools, although it is important to disconnect the power for safety before doing any repairs. If the old primer bulb is still present, it must be removed from the engine before installing the new one. Check the cracks of the bulb housing to ensure no pieces are left behind before putting the new bulb in place. Once it is in place, test the bulb a few times to make sure it depresses and springs back properly, and that it actually pushes the fuel into the engine.

This is a genuine replacement O-ring, which is a standard part on a number of engines. This O-ring is specifically designed as a replacement for the one found in the carburetor on select lawn and garden engines. The O-ring is designed to create a seal in the carburetor to ensure optimal performance and prevent leaks. It is also designed to help create the right amount of pressure. Over time, O-rings can become corroded, worn, or damaged due to their exposure to pressure and high heat. If they become broken or damaged, they can result in poor engine performance or even total engine failure. This genuine OEM O-ring is manufactured by RYOBI and compatible with a number of tillers, trimmers, and blowers from this brand. It is also designed for use with select models from Bolens, Yard Man, MTD, and Troy-Bilt. There are more than 150 models that can use this specific O-ring. It is made of durable materials and sold as an individual unit. Keep in mind that because O-rings have multiple applications and engines may have more than one type, it is important to double-check the location and application of the part to ensure the right one is being used.

This is a replacement air filter for a trimmer, leaf blower, or vacuum. It is necessary to prevent any significant quantities of dust or debris commonly kicked up during the use of the machine from entering into the engine. It could block the airflow, overheat the motor, and harm or destroy it. This OEM replacement part is straightforward to install and depending on the model, will usually require little more than a screwdriver to effect the repair. The removal of the housing over the filter is needed, and then it is a matter of just removing the clogged our outdated filter and slipping in the replacement. Shaped like a cup, it will fit snugly into the housing, and make reassembly just as simple. Before replacement, the filter should be treated with some oil by popping it into a plastic bag with a few drops of oil and working it into the material. This genuine OEM air filter works with Craftsman, Ryobi, Troy Bilt, Yard-Man, Bolens, MTD, Cub Cadet, and Murray machines, among others. It ships individually.

This fuel cap assembly fits on the lawn tractor fuel tank to keep the fuel inside and debris outside. The part is red and has a gas pump embossed on it for added identification. The top of the cap also features vent slots to allow hot air to escape and prevent heat expansion. It features a gasket under the cap to keep gas from sloshing out during operation. The fuel cap assembly is made of heavy-duty plastic that can fade and crack due to the elements. Removal and replacement are as simple as taking the old cap off and putting the new cap on. Hand-tighten to prevent gas from leaking. Never over-fill the fuel tank. Leave room for the oil additive if it is not mixed before fueling. This fuel cap assembly is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as an individual unit. This fuel cap is designed for use in lawnmowers and lawn tractors manufactured by MTD, Ryobi, Troy-Bilt, Bolens, Yard-Man Yard Machines, Cub Cadet, and Murray.

This bump head assembly is a genuine MTD part, sold individually. This bump head assembly can be used as a replacement part in a string trimmer. The purpose of the bump head assembly is to release the string, or the line, of the string trimmer in order to cut through greenery while in use by the operator.The bump head assembly in a string trimmer might have to be replaced if it can no longer properly unspool and dispense line. The bump head assembly could be punctured, dented, cracked, warped, eroded, or damaged in some other form.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This bump head assembly is compatible with the following outdoor appliance brands: MTD and Craftsman.