Parts for Cub Cadet 41CDC02G100: Engine Parts

This is a replacement for the primer bulb on select MTD engines for lawn and garden equipment. The primer bulb is responsible for helping force fuel into the carburetor to initialize starting when the engine has been sitting. The bulb is made of a durable rubberized material, but it can become cracked, worn, or otherwise damaged over time. This will require a replacement of the bulb to ensure that the internal primer mechanism is protected from the elements. This genuine OEM primer bulb offers an exact fit for several engines manufactured by MTD. It is a standard size primer bulb and sold as an individual unit. No other parts or accessories are included. Replacing this bulb does not require any tools, although it is important to disconnect the power for safety before doing any repairs. If the old primer bulb is still present, it must be removed from the engine before installing the new one. Check the cracks of the bulb housing to ensure no pieces are left behind before putting the new bulb in place. Once it is in place, test the bulb a few times to make sure it depresses and springs back properly, and that it actually pushes the fuel into the engine.

This reel spool assembly is specifically designed for use with string trimmers and comes with all necessary parts, including the trimmer line and the spool. The line itself is used when the trimmer is in use to cut grass and foliage. The spool is the component that the string is wrapped around to keep it secure while using the trimmer.If the reel spool or the line is damaged or broken, the reel spool assembly should be replaced. A wrench or a screwdriver will be needed to go through the process. When replacing the parts in the reel spool assembly, the spool cover will need to be removed. Make sure the string trimmer is on a sturdy surface and the spark plug wire has been disconnected. Place the spool assembly in the housing, feed the line, and replace the cap.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The reel spool assembly is compatible with many string trimmers manufactured by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Bolens, and Yard-Man.

A shoulder strap is a strap made to be attached to machinery in order to make the use of the machine easier, less awkward, and more comfortable for the user. It designed for use with outdoor lawn and garden equipment such as string trimmers, leaf blowers, and pole pruners. Fortunately, if a shoulder strap breaks, it will be very obvious and is easily fixed. Signs of a faulty shoulder strap include frayed edges, worn or thin fabric, or faulty attaching mechanisms holding the strap to the machine. The replacement or repair process is incredibly simple, as it requires no technical savvy or internal part replacement. Everything requiring replacement is visible from the outside of the machine.This shoulder strap is also sometimes referred to simply as a backpack harness assembly strap. The purchase of the shoulder strap does include any necessary mounting hardware needed to attach it to outdoor equipment. The shoulder strap is built to last and create a more pleasant experience while using a blower, vacuum, or pruner.This shoulder strap is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. In most cases, since each strap is sold separately, if the user prefers to attach the shoulder straps in a way that resembles a backpack or harness instead of just a single shoulder strap, the purchase of two separate shoulder straps will be necessary. This particular backpack harness assembly strap is compatible for use with machines made by Craftsman, Ryobi, Troy-Bilt, Yard Machines, MTD, Bolens, and Yard-Man.

This is a genuine replacement O-ring, which is a standard part on a number of engines. This O-ring is specifically designed as a replacement for the one found in the carburetor on select lawn and garden engines. The O-ring is designed to create a seal in the carburetor to ensure optimal performance and prevent leaks. It is also designed to help create the right amount of pressure. Over time, O-rings can become corroded, worn, or damaged due to their exposure to pressure and high heat. If they become broken or damaged, they can result in poor engine performance or even total engine failure. This genuine OEM O-ring is manufactured by RYOBI and compatible with a number of tillers, trimmers, and blowers from this brand. It is also designed for use with select models from Bolens, Yard Man, MTD, and Troy-Bilt. There are more than 150 models that can use this specific O-ring. It is made of durable materials and sold as an individual unit. Keep in mind that because O-rings have multiple applications and engines may have more than one type, it is important to double-check the location and application of the part to ensure the right one is being used.

This is a replacement air filter for a trimmer, leaf blower, or vacuum. It is necessary to prevent any significant quantities of dust or debris commonly kicked up during the use of the machine from entering into the engine. It could block the airflow, overheat the motor, and harm or destroy it. This OEM replacement part is straightforward to install and depending on the model, will usually require little more than a screwdriver to effect the repair. The removal of the housing over the filter is needed, and then it is a matter of just removing the clogged our outdated filter and slipping in the replacement. Shaped like a cup, it will fit snugly into the housing, and make reassembly just as simple. Before replacement, the filter should be treated with some oil by popping it into a plastic bag with a few drops of oil and working it into the material. This genuine OEM air filter works with Craftsman, Ryobi, Troy Bilt, Yard-Man, Bolens, MTD, Cub Cadet, and Murray machines, among others. It ships individually.

This is a genuine replacement screw designed for use in select MTD engines on lawn and garden equipment. Specifically, this is an anti-rotation screw, which is used to stop the drive shaft housing from turning inside of the main housing assembly. This screw is a small part that is subject to constant vibrations, pressure, and high temperatures. It can sometimes become worn or damaged as a result or even break off entirely, which would mean that the inner housing would no longer be held in place accordingly. If this screw is damaged or lost, it needs to be replaced with a genuine OEM replacement as soon as possible. This MTD anti-rotation screw is manufactured with high-quality materials and designed for use in select trimmers from MTD, RYOBI, Yard-Man, Troy-Bilt, Murray, Cub Cadet, Yard Machines, and Bolens. This replacement will require a screwdriver. Simply remove the damaged screw, if it is not already missing, from the clutch cover assembly, and then install the new screw. It should only take a few minutes to perform the replacement. Be sure to wear gloves to protect the hands. This screw is sold individually and does not include any additional parts or hardware.

This fuel cap assembly fits on the lawn tractor fuel tank to keep the fuel inside and debris outside. The part is red and has a gas pump embossed on it for added identification. The top of the cap also features vent slots to allow hot air to escape and prevent heat expansion. It features a gasket under the cap to keep gas from sloshing out during operation. The fuel cap assembly is made of heavy-duty plastic that can fade and crack due to the elements. Removal and replacement are as simple as taking the old cap off and putting the new cap on. Hand-tighten to prevent gas from leaking. Never over-fill the fuel tank. Leave room for the oil additive if it is not mixed before fueling. This fuel cap assembly is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as an individual unit. This fuel cap is designed for use in lawnmowers and lawn tractors manufactured by MTD, Ryobi, Troy-Bilt, Bolens, Yard-Man Yard Machines, Cub Cadet, and Murray.