Parts for Dixon D22KH46 (96046001200): Engine Parts

This no grease mandrel assembly is the part that houses the shaft where the mower blade attaches. It is mounted to the deck of the mower by three bolts, which are sold separately. The mounting holes on the mandrel housing are not threaded, but the bolts used to secure the mandrel to the deck are self-tapping. If the lawnmower is no longer providing an even cut, there may be a problem with the mandrel assembly. A broken or damaged mandrel assembly can severely reduce the mower's cutting performance. Replace it as soon as possible. The mandrel shaft goes through the deck, and the pulleys are attached to them, then the belt that drives the mandrels is placed in the pulleys. A spacer must be installed under the pulley. Failing to use a spacer or installing it on top of the pulley will result in damage to the shaft and pulley. This mandrel assembly is compatible with Ariens, Craftsman, Husqvarna, Poulan, and Weed Eater lawn mower models. It is an OEM part sourced directly from the manufacturer and is sold individually. The mandrel assembly includes a housing, shaft assembly, bearing, and nut only; the pulley/washer and blade bolt/washers are not included.

This replacement part is a clutch intended for use in lawn equipment. This is a genuine replacement part made by Husqvarna. Clutches engage the blade of the lawn mower so that the user is able to properly cut grass. The clutch connects two different drive shafts so that they can be controlled by the toggle.A new clutch might be needed if the current one is broken or damaged in any way. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide or manual for the appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by Husqvarna.

This part is a replacement fuel tank. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or broken fuel tank in lawn tractors.The fuel tank holds the lawn tractor's gas supply. If the tank becomes cracked or broken, it may leak and be unable to properly hold the fuel. Thus, it should be replaced immediately. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular fuel tank, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality materials. This fuel tank can be used with a variety of lawn mower models manufactured by MTD, Craftsman, and other brands.

This is a lawn tractor fuel line that will work with tractors from a range of manufacturers. The fuel line is used to carry fuel from the tank to the engine carburetor. This will ensure that the tractor can start and run properly. If there is a problem with the fuel line, owners might notice that there are leaks or that they have trouble getting the lawn tractor started.The fuel line is durable, but it could need to be replaced eventually. The material can start to wear down over time, and it might develop cracks. It could also be damaged during the operation of the tractor in some cases. Always wear gloves and work in a well-ventilated area.This lawn tractor fuel line can be used for models of tractors from Husqvarna, Dixon, Poulan, Craftsmen, Ariens, and Southern States. The piece is sold individually. It is a genuine OEM replacement part that was sourced directly from the manufacturer.

This is a replacement exhaust pipe. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a damaged or detached exhaust pipe on a variety of different lawnmower models. The exhaust pipe is necessary for properly expelling exhaust fumes from the lawnmower's engine. Exhaust pipes can easily become bent, dented, or otherwise damaged from being hit on hard objects or the ground during use. If this occurs, this part will need replaced. Access to proper tools is required for replacing this part. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install exhaust pipe, refer to the appropriate owner's manual and included diagrams.As an authentic replacement part, this exhaust pipe is suitable for use on several different lawnmower models manufactured by Husqvarna and Jonsered. This is a genuine part made of high-quality, durable materials and is sold individually.

This OEM replacement part is a socket screw for lawnmowers. The socket screw attaches the exhaust to a lawnmower. If the socket screw is no longer securing the exhaust of the lawnmower, it will need to be replaced. Luckily replacing this screw is a very simple process.Before beginning, make sure the exhaust pipe has cooled. After that, locate the old socket screw that attaches the exhaust. Once located, unfasten the old screw. After removal, replace it with the new socket screw by tightening it with a screwdriver. Make sure it is fastened all the way so that the exhaust is secure. This genuine replacement part is sold individually and is compatible with Husqvarna, Poulan, and Craftsman brand lawnmowers.

This is a genuine replacement for the oil drain valve on select Husqvarna engines. The oil drain valve is connected to the oil pan and the drain, assisting with draining oil from the engine. As the oil passes through the drain valve, it can cause residue to build up over time. This is a metal part, but it can become damaged in many ways. The valve seals could become worn or faulty, creating leaks. In the event that it is no longer functioning, a replacement valve may be required. This OEM part will provide an exact fit for compatible engines. This genuine oil drain valve is manufactured by Husqvarna to exact standards and is compatible with many engines made by the brand. These engines are found in lawn tractors from brands like RYOBI, Weed Eater, Poulan, and Jonsered, as well. Allow the engine to cool completely and disable the spark plug(s) before beginning any engine repairs. This durable metal replacement part is sold as an individual unit and additional hardware and accessories are not included.