Parts for Husqvarna 96045005500: Engine Parts

This no grease mandrel assembly is the part that houses the shaft where the mower blade attaches. It is mounted to the deck of the mower by three bolts, which are sold separately. The mounting holes on the mandrel housing are not threaded, but the bolts used to secure the mandrel to the deck are self-tapping. If the lawnmower is no longer providing an even cut, there may be a problem with the mandrel assembly. A broken or damaged mandrel assembly can severely reduce the mower's cutting performance. Replace it as soon as possible. The mandrel shaft goes through the deck, and the pulleys are attached to them, then the belt that drives the mandrels is placed in the pulleys. A spacer must be installed under the pulley. Failing to use a spacer or installing it on top of the pulley will result in damage to the shaft and pulley. This mandrel assembly is compatible with Ariens, Craftsman, Husqvarna, Poulan, and Weed Eater lawn mower models. It is an OEM part sourced directly from the manufacturer and is sold individually. The mandrel assembly includes a housing, shaft assembly, bearing, and nut only; the pulley/washer and blade bolt/washers are not included.

This engine pulley is a genuine MTD part, sold individually. This engine pulley can be used as a replacement part in a lawnmower. The purpose of the engine pulley in a lawnmower is to guide the rotational motion of the drive belt within the internal mechanisms of the lawnmower such that the belt can facilitate the rotation of the wheels and the propulsion of the appliance across a variety of surfaces when in use.If the engine pulley has been cracked, scraped, punctured, dented, warped, or eroded to the point that it can no longer serve its function, the engine pulley should be removed and replaced by this genuine OEM replacement part as soon as possible.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This engine pulley is compatible with the following outdoor appliance brands: MTD and Craftsman.

This fuel cap is a genuine Husqvarna part, sold individually. This fuel cap can be used as a replacement part in a lawn mower. The purpose of the fuel cap in a lawn mower is to seal the fuel tank.The fuel cap in a lawn mower might have to be replaced if it is damaged and allowing fuel to leak out or debris to reach the fuel tank. This could occur if the fuel cap is punctured, dented, warped, or eroded to the point of exposing the internal mechanisms of the appliance to the outside. If this occurs, the fuel cap should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement sourced directly from the manufacturer. It is sold individually. This fuel cap is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

The replacement throttle/choke control seen here is compatible with several lawn tractor models from well-known manufacturers. The throttle is an important part of the tractor, which will control the speed of the engine and the speed of the blades. It is also used to start the engine. Owners may notice that the machine has poor performance, and it is not easy to control the speed when there are issues with the throttle.The control mechanism is made from metal and plastic. While the piece is durable, it can still have issues that would require replacement. Some of the metal parts and connectors could start to wear down or even corrode over time. The plastic could crack on the handle, and it could be more difficult to use. Replace the part as soon as possible if necessary.The replacement throttle/choke control works with certain lawn tractors from Poulan, Husqvarna, and Jonsered. It is sold individually. This is a genuine OEM replacement part that has been sourced right from the manufacturer.

This OEM replacement part is a socket screw for lawnmowers. The socket screw attaches the exhaust to a lawnmower. If the socket screw is no longer securing the exhaust of the lawnmower, it will need to be replaced. Luckily replacing this screw is a very simple process.Before beginning, make sure the exhaust pipe has cooled. After that, locate the old socket screw that attaches the exhaust. Once located, unfasten the old screw. After removal, replace it with the new socket screw by tightening it with a screwdriver. Make sure it is fastened all the way so that the exhaust is secure. This genuine replacement part is sold individually and is compatible with Husqvarna, Poulan, and Craftsman brand lawnmowers.

This is a genuine replacement for the oil drain valve on select Husqvarna engines. The oil drain valve is connected to the oil pan and the drain, assisting with draining oil from the engine. As the oil passes through the drain valve, it can cause residue to build up over time. This is a metal part, but it can become damaged in many ways. The valve seals could become worn or faulty, creating leaks. In the event that it is no longer functioning, a replacement valve may be required. This OEM part will provide an exact fit for compatible engines. This genuine oil drain valve is manufactured by Husqvarna to exact standards and is compatible with many engines made by the brand. These engines are found in lawn tractors from brands like RYOBI, Weed Eater, Poulan, and Jonsered, as well. Allow the engine to cool completely and disable the spark plug(s) before beginning any engine repairs. This durable metal replacement part is sold as an individual unit and additional hardware and accessories are not included.