Parts for Mtd 952Z1P70M0: Engine Parts

This replacement part is a carburetor kit. This is a genuine replacement part made by MTD. This kit is used to replace or repair the carburetor in an engine. This part ensures that the engine is able to run correctly and efficiently during use. A new carburetor kit might be needed if the current carburetor is no longer working properly. This can be due to an incident that may have damaged to the part or from general wear and tear over time. Refer to the proper user manual for more details and instructions on how to correctly repair this part. Work gloves are always recommended when working near the engine. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This replacement part is an oil filler tube is intended for use in different types of lawn equipment. It is a genuine replacement part made by MTD. This tube allows the user to easily fill the tank with oil without having to worry about spills.A new oil filler tube might be needed if the current one is missing or damaged. It is possible that the tube can become damaged after years of normal wear and tear. If this is the case the user should plan to replace it immediately so that the tank is able to be refilled. Be sure to wear work gloves when replacing this part as there might still be oil in the tube. This is a genuine OEM replacement part to ensure long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

This dipstick assembly is a genuine MTD part, sold individually. This dipstick assembly can be used as a replacement part in a lawn mower or a tiller. The purpose of a dipstick assembly, otherwise known as an oil dipstick assembly, in a lawn mower or a tiller is to allow the user to check oil levels in the appliance.If the oil has just been refilled and the dipstick assembly does not read this, or if the oil is empty and the dipstick reads that the oil is full, the dipstick assembly should be removed and replaced by this genuine OEM replacement part. This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This dipstick assembly is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Yard Machines, Huskee, and Yard Man.

This spark arrestor is a genuine MTD part. It is a replacement part for lawn mowers, log splitters, and walk-behind mowers. The spark arrestor is an important safety feature, and it is illegal to sell or operate a machine without one.This part arrests or extinguishes sparks that are created by the engine and other components while the mower is in use. It prevents fires, and mowers should never be used without one.This spark arrestor is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines made by Craftsman, MasterCut, Bolens, Cub Cadet, Husky, MTD, Troy-Bilt, and Yard-Man.

The flywheel key keeps the engine flywheel and the crankshaft connected. In the event that the engine is forced to a sudden stop, the flywheel key could be sheared off, making it impossible for the engine to start back up again. Replacing the flywheel key is a part of routine maintenance for many modern engines, so it should be inspected and replaced as needed. This sturdy metal flywheel key is easy to install, but remember to choose the right torque setting when doing the replacement. Always disengage the spark plug and wear gloves when replacing engine parts. This genuine flywheel key is designed to be used in a number of lawn and garden equipment products from MTD, Troy-Bilt, Yard Machines, Cub Cadet, Yard-Man, Husky, and Bolens. It can be used as a replacement for many models of snowblowers, lawnmowers, and log splitters. Sold individually.

This air cleaner housing is a genuine MTD part, sold individually. This air cleaner housing can be used as a replacement part for lawn mowers and leaf blowers. The air cleaner housing provides a casing for the air cleaner so that it can shield the internal engine from dirt, debris, and pebbles. Check the air cleaner housing regularly to ensure that it is intact and no debris is getting into the engine. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This air cleaner housing is compatible with the following brands: MTD, Huskee, and Yard-Man.

Fuel filters are created to strain out gas before it reaches the carburetor in lawnmowers and other gardening tools. Located in the fuel line or the fuel tank, it prevents unwanted debris from reaching the carburetor, which can cause engine damage. If the fuel filter is damaged or becomes clogged with material, it no longer offers the same protection to the carburetor. This can lead to difficulty starting the lawnmower and decreased performance. Correcting this issue early can prevent damage that might require a new lawnmower. Maintenance of the lawnmower by adding fuel stabilizer, changing the oil, and replacing the air filter will increase the life of lawn care equioment. Even if no issues are present, the fuel filter should be replaced after about 200 hours of use. Disconnecting the spark plug should be done prior to installing a new fuel filter. This fuel filter is a genuine OEM component directly from the manufacturer and comes as an individual part. It can be used with various Craftsman, Cub Cadet, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and Mastercut lawnmowers, tillers, blowers, and wood chippers.

A fuel cap assembly is a component often seen on lawnmowers and other lawn and garden equipment. It is made of durable black plastic and is used to ensure that fuel doesn’t spill out of the fuel tank. Over time, fuel cap assemblies can begin to wear out and cause problems. Sometimes this results in a cap that doesn’t tighten all the way or there may be a fuel smell when using a lawnmower or snowblower. If fuel is leaking, the cap doesn’t fit right, or the cap seems damaged, it’s best to replace it with a new component. This is a simple process that involves removing the original fuel cap assembly and fitting the new assembly to the lawn machine. This fuel cap assembly is a genuine OEM component that comes directly from the manufacturer. It is an individual part that is compatible with MTD, Murray, Cub Cadet, Bolens, Yard-Man, and Yard Machines lawnmowers, snowblowers, chipper shredders, and tillers. No tools are required to replace this component.

The recoil starter assembly starts the engine by using the grip to pull the rope, which activates the starter pulley and spring, causing the flywheel to rotate and start the engine. Over time, the starter spring can become stretched, causing the rope to seize up or fail to retract. The housing itself could also become damaged. It’s often easiest to replace the entire recoil starter assembly with this OEM model rather than individual components. The installation can be done quickly with a screwdriver and wrench by removing the three bolts that hold the assembly in place. This genuine OEM part is manufactured by MTD. It fits lawn mowers, tillers, log splitters, and other small engines made by MTD, as well as models from Bolens, Yard-Man, Yard Machines, Cub Cadet, Troy-Bilt, and Husky. This part includes the starter housing that protects the flywheel and other internal components, along with a starter pulley, spring, pull rope, and grip. The hardware required for this assembly is not included and must be purchased separately.

Installing a brand-new air filter keeps the engine in top running condition. When the machine is in operation, the vacuumed air goes through the air filter. Any dirt or dust is left in the filter media. Over time, the filter will become dirty and can no longer provide the same filtering efficiency as before. If left ignored, the tiny particles could clog the engine and the carburetor. You may experience misfires and no engine start-up. An air filter replacement is cheap and easy to do. Simply remove the air cleaner cover and take out the dirty filter. Insert the new filter into the housing. This replacement will take less than 5 minutes. A screwdriver will be needed. The MTD 951-10298 Air Cleaner Kit is a genuine air filter from MTD. Each kit comes with one paper filter and one foam filter. The foam filter can be cleaned with water and detergent. The paper filter, however, needs replacement at least once a year. This air filter kit is compatible with Cub Cadet, PowerMore, and Troy-Bilt. It can also work with other garden equipment like wheel string trimmers, chipper-shredder vacuums, and log splitters.

This is a genuine replacement for the air cleaner thumb screw found on select engines used in lawn mowers. The thumb screw is a specialty part that is used to secure the air cleaner in a stable position. Over time, the screw can become damaged or worn because of the constant engine vibrations or exposure to high heat. This screw may also be lost during air filter replacements or other repair work. In either case, it should be replaced with a genuine part like this one to ensure the air cleaner remains secure and the machine can continue to be used. This genuine OEM thumb screw is manufactured by MTD and is compatible with several machines from the brand. It can also be used with models from Bolens, Yard Man, Yard Machines, HUSKEE, Cub Cadet, and Troy-Bilt. There are hundreds of compatible models that can use this thumb screw. The part is made of durable metal with a black plastic grip for easy installation with no tools required. This item is sold individually and does not include additional hardware or parts. Always allow the engine to cool completely and wear gloves when working on lawn and garden equipment.

This is a muffler assembly that is used with many types of lawn and garden equipment from major manufacturers. The part is connected to the exhaust tube and is tasked with reducing the noise made by the exhaust. As time goes on, the muffler assembly can start to become damaged or malfunction and may need to be replaced. When replacing the muffler assembly, make sure the spark plug is removed and the equipment is powered off. It should be placed on a stable surface during the replacement process. Take the bolts out of the muffler and remove them from the engine. Take the bolts from earlier and install them into the replacement muffler. Install the gaskets, heat shield, and other parts before placing the new muffler into the lawn equipment. Reassemble all parts before using the tool.The muffler assembly is an authentic OEM replacement part that is directly sourced from the manufacturer. It is made to be used with lawnmowers, tillers, leaf blowers, log splitters, and wood chippers manufactured by MasterCut, Craftsman, Yard-Man, Cub Cadet, Huskee, MTD, and Yard Machines. This component is sold as an individual item.

This governor return spring is an essential part designed for use with outdoor lawn and garden power equipment that have small engines, such as a lawn mower, a tiller, a leaf blower, and a wood chipper. It is compatible with products by brands such as Cub Cadet, Yard Machines, MTD, Huskee, and Yard-Man.The purpose of the governor return spring is to apply tension to the throttle, which in turn controls the speed of the engine. Over the life of the machine, many components, such as the governor return spring, undergo normal wear and tear. The most common reason for replacing the governor spring is when it is worn out or broken. Signs and symptoms that it is time to replace the governor return spring include deterioration that is causing the engine to over-speed or run improperly. The replacement or repair process of the governor return spring should be straightforward, though the user should plan on using needle nose pliers for the replacement process. Always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.This governor return spring is made out of metal. This governor return spring is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually.

This is a small engine spark plug positioned in the engine cylinder head. It supplies the spark that will ignite the air-fuel mixture to enable an engine to produce power. This particular spark plug is designed with superior corrosion resistance and dependable performance. Small but mighty, this component allows for increased conductivity and heat control. If the spark plug is damaged or in poor condition, many problems may arise in equipment, including sudden stop while running, overheating, and excessive gas consumption. Replace the spark plug by disconnecting the spark plug wire first, then use a socket driver or wrench to remove the spark plug. Install the new spark plug by turning it by hand initially to avoid cross-threading. If it doesn't twist anymore, use a deep socket wrench or socket driver to tighten the plug until snug. The spark plug can also be used to tune up outdoor power equipment or improve a small engine. This part is recommended to be replaced once per season. This part works with lawn mowers, snowblowers, tillers, leaf blowers, log splitters, wood chippers, and others with small engines. It is compatible with brands such as Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut. This is a genuine OEM part directly from the manufacturer and is sold individually.

This replacement part is a flywheel. It is a genuine replacement part made by MTD. A flywheel is commonly found in lawnmowers in the engine and was designed to help keep the engine cool during use and allow it to work for many minutes without overheating. A new flywheel might be needed if the engine is overheating more than normal. Be sure to wear working gloves while replacing this part as it can be sharp and cause injury when handled. This part is made of durable metal so that it can operate properly. This flywheel is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure long-lasting use and proper fit.