Parts for Craftsman 917289821: Engine Plate Parts

This replacement part is a clutch intended for use in lawn equipment. This is a genuine replacement part made by Husqvarna. Clutches engage the blade of the lawn mower so that the user is able to properly cut grass. The clutch connects two different drive shafts so that they can be controlled by the toggle.A new clutch might be needed if the current one is broken or damaged in any way. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide or manual for the appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by Husqvarna.

This exhaust pipe is a genuine Husqvarna part, sold individually. This exhaust pipe can be used as a replacement part in a lawn mower. The purpose of the exhaust pipe in a lawn mower is to redirect gases and combustion away from the appliance and from the operator.The exhaust pipe in a lawn mower might have to be replaced if it or any component near it shows signs of damage. Signs of damage to the exhaust pipe can include increased or unusual noise coming from the exhaust, reduced fuel economy, strong gasoline odor, hard starting or misfiring engine, or a burning smell from the exhaust. If any of these signs of damage occur, the exhaust pipe should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement sourced directly from the manufacturer. It is sold individually. This exhaust pipe is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This is a replacement wiring harness that can work with a range of lawn tractors and mowers. The wiring harness features organized wires, terminals, and connectors that run throughout the mower to relay information and electrical power. It connects the components of the machine. If an owner notices that there are problems with the electrical features of the mower, it could be the wiring. A new harness might be needed.The wiring harness should last for a long time, but many potential problems could arise. The sheathing could start to wear out, exposing wires. Some of the wires could be damaged or cut, and some of the plastic components could break and no longer connect properly. Check their harness and replace it if needed.This wiring harness is compatible with many models of machines from Husqvarna and Poulan. The harness is sold individually. This is a genuine OEM replacement part that has been sourced directly from the manufacturer.

This replacement part is an idler arm and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Idler arms are present in many different types of equipment that require steering. Idler arms are able to control and provide support to the pivoting mechanisms inside the appliance.A new idler arm might be needed if the user is not able to steer or turn properly or smoothly. It is common that idler arms become stripped overtime due to normal wear and tear. Without the idler arm working properly the user might not be able to turn or steer the machine at all. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This replacement part is an idler spindle, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is commonly found in lawn mowers and assists the user in turning the machine in different directions. The idler spindle allows for smooth turns and maneuvers during use. A new idler spindle might be needed if the current ones are damaged or broken in any way. It is possible for this part to become worn down or stripped overtime due to normal wear and tear. If the user noticed that the machine is not turning as smoothly or is unable to rotate the steering of the appliance, it might be time to replace the idler spindle. This replacement part is an OEM part sourced directly from the manufacturer. This idler spindle is sold individually. Be sure to purchase the correct amount as some appliances require more than one.

This part is a replacement engine pulley. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, defective, or damaged engine pulley on lawn mowers.The engine pulley is what drives the equipment's transmission belt. If this pulley is worn or malfunctioning, the blades of the mower or tractor will not rotate properly, if at all. Thus, this part should be replaced in order for the equipment to function properly. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this engine pulley, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this engine pulley is suitable for use on several models of lawn mowers and lawn tractors manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

This part is a twin-muffler assembly that is used on lawn tractors. A muffler assembly is a component on engines that have two cylinders. The purpose of the muffler is to reduce the noise and the emissions that are produced by the motor. This part also connects to the exhaust pipes.A new twin-muffler assembly may be needed if the original has become clogged and is no longer functioning correctly. Mufflers often need to be replaced within the lifespan of the tractor as they are susceptible to wear and tear. Make sure to allow the machine to cool down thoroughly prior to attempting to perform any repairs or replacements on the machine. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This twin-muffler assembly is a genuine Husqvarna part. It is sold individually. This particular twin-muffler assembly is compatible with lawn tractors that are manufactured by Husqvarna, Poulan, and Jonsered.

This genuine replacement Husqvarna carriage bolt can be used in the infrastructure of several different kinds of appliances that require small engines, including lawn mowers, leaf blowers, lawn tractors, line trimmers, snowblowers, wood-chippers, and generators. Carriage bolts are distinguished by their round heads and flat tips. Their function as a fastener, in conjunction with nuts, is to attach materials or components to one another, wood and metal components in particular. There are several reasons that a carriage bolt might have to be replaced, including misplacement of a carriage bolt, as the part is relatively small and can disappear without immediate consequence. Other reasons to replace a carriage bolt can include damage from overuse, exposure, or age; this damage can manifest in the form of visible erosion, cracking, or piercing that prevents the carriage bolt from properly fastening materials to one another. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This carriage bolt is compatible with the following brands: Husqvarna, Poulan, and Craftsman. Part sold individually.

This part is a nyloc nut. This specific nut is used in many different applications depending upon the outdoor power equipment machine that it is used on. This nut has a nylon collar insert that resists turning when it has been threaded on correctly. The nyloc nut is a type of lock nut, which prevents loosening when it's exposed to vibrations. It helps fasten parts together.A new nyloc nut may be needed if the original one has been broken, damaged, or lost. If the nyloc nut is no longer staying in place when it is exposed to vibrations and the operator can notice the parts loosening, then the nyloc nut will need to be replaced.This is a genuine OEM part sourced directly from Husqvarna. It is sold individually. This nyloc nut is used on snowblowers that are manufactured by both Husqvarna and Craftsman.

This replacement part is a hex nut. It is a genuine replacement part made by Husqvarna. This part is small yet very important to the overall operation of many different appliances. Hex nuts are able to hold other parts in place and secure them so that everything can operate smoothly. A new hex nut might be needed if the current ones are damaged or missing. The repair should be fairly easy and only require a screwdriver or pliers if the previous part is stuck. It is possible that nuts can become stripped or lodged over time and should be replaced when this occurs. Be sure the engine is completely powered down before starting a repair. This is a genuine OEM replacement part sourced directly from the manufacturer. This nut is sold individually. Be sure to purchase the correct amount as many appliances require more than one.

This replacement part is a flange nut. It is a genuine replacement part made by Husqvarna. This part is small yet extremely important to the operation of many different appliances and machines. Nuts are able to hold other parts in place and secure them tightly so that everything can operate smoothly and efficiently. A new flange nut might be needed if the current ones are damaged in any way or even missing. This repair should be fairly easy and only require a screwdriver or pliers if the previous part is lodged in place. It is possible that nuts can become stripped or stuck over time and should be replaced when and if this occurs. Be sure the engine is completely powered down before starting a repair. This part is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer.

Flat washers have multiple applications in lawn mowers and tractors, but are used to add additional security to various screws and bolts. These are made of durable metal, but they can still become worn or damaged over time. The flat washer is a useful part that needs to be in working order at all times for the most effective operation of your lawn equipment. In some cases, they can become lost or damaged during other maintenance. Replacing them is easy with this OEM flat washer. Refer to the user manual for various applications and locations of this washer, as each unit will have its own specifications. Always follow manufacturer instructions for installing hardware like this flat washer replacement. This genuine OEM washer is manufactured to exact standards by Husqvarna. It is designed to be used with several brands of lawn and garden equipment engines, including Weed Eater, Husqvarna, Poulan, Poulan Pro, Craftsman/Sears, and Roper. The part is silver in finish and is sold individually. Order multiple quantities as needed.