Parts for Husqvarna 965880401: Engine Plate Parts

This exhaust pipe is a genuine Husqvarna part, sold individually. This exhaust pipe can be used as a replacement part in a lawn mower. The purpose of the exhaust pipe in a lawn mower is to redirect gases and combustion away from the appliance and from the operator.The exhaust pipe in a lawn mower might have to be replaced if it or any component near it shows signs of damage. Signs of damage to the exhaust pipe can include increased or unusual noise coming from the exhaust, reduced fuel economy, strong gasoline odor, hard starting or misfiring engine, or a burning smell from the exhaust. If any of these signs of damage occur, the exhaust pipe should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement sourced directly from the manufacturer. It is sold individually. This exhaust pipe is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

Replace your riding mower's exhaust tube muffler if cracked, rusted, or leaking. This component directs hot exhaust gases away from the engine safely.

Twin-muffler assembly for riding mowers with two-cylinder engines. Connects to exhaust pipes to reduce noise and emissions. Replace if cracked or damaged.

This replacement part is an idler spindle, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is commonly found in lawn mowers and assists the user in turning the machine in different directions. The idler spindle allows for smooth turns and maneuvers during use. A new idler spindle might be needed if the current ones are damaged or broken in any way. It is possible for this part to become worn down or stripped overtime due to normal wear and tear. If the user noticed that the machine is not turning as smoothly or is unable to rotate the steering of the appliance, it might be time to replace the idler spindle. This replacement part is an OEM part sourced directly from the manufacturer. This idler spindle is sold individually. Be sure to purchase the correct amount as some appliances require more than one.

This replacement part is an idler arm and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Idler arms are present in many different types of equipment that require steering. Idler arms are able to control and provide support to the pivoting mechanisms inside the appliance.A new idler arm might be needed if the user is not able to steer or turn properly or smoothly. It is common that idler arms become stripped overtime due to normal wear and tear. Without the idler arm working properly the user might not be able to turn or steer the machine at all. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

Idler pulley for riding mowers and tractors. Replaces worn, cracked, or damaged pulleys in the belt drive system. Essential for smooth operation.

Flat washer for riding mower and lawn tractor assemblies. Replaces worn, missing, or damaged washers in engine, deck, or frame installations.

Hex nut for riding mowers and tractors. Secures components in place throughout the machine. Replace if stripped, corroded, or missing during repairs.

This part is a clutch that is used on lawn tractors and riding lawnmowers. A clutch transfers the power from the unit's engine to the drivetrain and is responsible for engaging the blade.A new clutch may be needed if the lawn tractor or riding lawn mower will start but then stalls. If the clutch is sticky or if it operates hard, it may be time to replace the clutch. If the engine is revving higher than usual or if there are strange noises coming from the clutch, it is likely that the clutch could be going bad. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This clutch is a genuine Husqvarna part. It is sold individually. This particular clutch is compatible with lawn tractors and riding lawnmowers that are manufactured by Husqvarna and Poulan.

Replacement engine pulley for riding mowers. Drives the transmission belt. Order if your original pulley is cracked, worn, or damaged from use.

Hex cap screw for riding mowers and lawn tractors. Replaces lost, stripped, or corroded fasteners. Grade 5 hex bolt secures components and panels.

Flat washers have multiple applications in lawn mowers and tractors, but are used to add additional security to various screws and bolts. These are made of durable metal, but they can still become worn or damaged over time. The flat washer is a useful part that needs to be in working order at all times for the most effective operation of your lawn equipment. In some cases, they can become lost or damaged during other maintenance. Replacing them is easy with this OEM flat washer. Refer to the user manual for various applications and locations of this washer, as each unit will have its own specifications. Always follow manufacturer instructions for installing hardware like this flat washer replacement. This genuine OEM washer is manufactured to exact standards by Husqvarna. It is designed to be used with several brands of lawn and garden equipment engines, including Weed Eater, Husqvarna, Poulan, Poulan Pro, Craftsman/Sears, and Roper. The part is silver in finish and is sold individually. Order multiple quantities as needed.

Prevents parts from loosening due to vibration on your riding mower. This nyloc lock nut uses a nylon collar insert to resist backing off during operation.

Replace a missing, stripped, or corroded 5/16-18 x 3/4 bolt on your riding mower. Essential hardware for securing deck, engine, or frame components.

Replacement carriage bolt for lawn tractor infrastructure and frame assembly. Replace if bolt is missing, damaged, or stripped during maintenance or repair.

Flange nut secures critical components on riding mowers and tractors. Prevents loosening from vibration. Simple hand-tool installation in minutes.

Fix fuel flow issues or engine that won't start with this riding mower fuel valve. Controls fuel delivery to the carburetor. Quick 15-minute repair.

Deck drive spring for riding mowers and tractors. Replaces cracked, broken, or worn springs on mower deck drive systems. Direct fit installation.