Parts for Husqvarna 967003901: Engine Plate Parts

This part is a replacement ground drive belt. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, worn, or malfunctioning ground drive belt in a variety of lawn tractor models. The ground drive belt helps to drive the tractor by rotating the transmission pulley. If this part is worn, snapped, or otherwise defective, the tractor may be rendered unusable and this part should be replaced. When working on or near any engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this ground drive belt, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this ground drive belt is suitable for use on several different models of lawn tractors manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This idler pulley is a genuine Husqvarna part, sold individually. This idler pulley can be used as a replacement part in a lawn mower. The purpose of the idler pulley in a lawn mower is to manage the rotation of the drive belt and support its placement within the appliance through the stable maintenance of tension on the belt. The idler pulley might have to be replaced at some point within the typical lifespan of a lawn mower if it can no longer serve its function of maintaining the motion and rotation of the drive belt. This could occur due to damage from general wear and tear with long-term use, from exposure to the elements, or due to an accidental collision with a hard object such as a rock or a curb. If this occurs, the idler pulley should be removed and replaced by this genuine OEM replacement part before using the lawn mower again.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This idler pulley is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This is a replacement clutch. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a worn out or defective clutch on a variety of different lawnmower models. This particular part is a 200 ft- clutch.The clutch is responsible for transferring power generated by the transmission to drive the lawnmower's wheels. If the clutch malfunctions, the equipment may not be maneuverable. Access to proper tools is required for replacing this part. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this clutch, refer to the appropriate owner's manual and included diagrams.As an authentic replacement part, this clutch is suitable for use on several different lawnmower models manufactured by Husqvarna. This is a genuine part made of high-quality, durable materials and is sold individually.

This hex bolt is a genuine OEM replacement part sourced directly from the manufacturer. It is used in multiple applications in outdoor power equipment to connect components, such as attaching the fuel tank to the body of a lawnmower. The hex bolt has a six-sided head that is removed or installed using a hex wrench. Hex bolts can become loosened due to vibration during use and will need to be tightened during regular maintenance. If the bolts are rusted or have fallen out and are lost, replacements can be installed. Always wear gloves when working with equipment. Make sure the equipment has had time to cool down to prevent burns. Locate the part that has a missing or damaged hex bolt. If necessary, remove components that are in the way. Use a hex wrench or box wrench to loosen the bolt that needs to be replaced. Once loosened, the bolt can be manually removed by hand; gripping the sides of the head and turning will unscrew the bolt. Pull the bolt out and insert the one. Screw as far down as possible by hand. Finish tightening using a hex wrench. Do not overtighten.This hex bolt is made of heavy-duty metal and is sold as an individual unit. It is compatible with lawnmowers, lawn tractors, and other machinery manufactured by Husqvarna, Bluebird, Poulan, and Craftsman.

This part is a twin-muffler assembly that is used on lawn tractors. A muffler assembly is a component on engines that have two cylinders. The purpose of the muffler is to reduce the noise and the emissions that are produced by the motor. This part also connects to the exhaust pipes.A new twin-muffler assembly may be needed if the original has become clogged and is no longer functioning correctly. Mufflers often need to be replaced within the lifespan of the tractor as they are susceptible to wear and tear. Make sure to allow the machine to cool down thoroughly prior to attempting to perform any repairs or replacements on the machine. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This twin-muffler assembly is a genuine Husqvarna part. It is sold individually. This particular twin-muffler assembly is compatible with lawn tractors that are manufactured by Husqvarna, Poulan, and Jonsered.

This key is a genuine Husqvarna part, sold individually. This key can be used as a replacement part in a lawn mower. The key in a lawn mower is used to power on the appliance by fitting into the ignition system of the appliance and then allowing the mechanisms within the appliance to ignite the spark plugs and power on the engine.The key in a lawn mower might need to be replaced if it is lost, misplaced, or damaged to the point that it cannot be used to enter the ignition system and turn on the appliance. This could occur if the key has been dented, punctured, torn, warped, or eroded during the standard use of the appliance. If this occurs, or if the key has been lost, it should be replaced by this genuine OEM replacement part in order to use the appliance again. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This key is compatible with the following outdoor appliance brands: Husqvarna.

This hex nut is a genuine Husqvarna part, sold individually. This hex nut can be used as a replacement part in a lawn mower. The purpose of the hex nut in a lawn mower is to secure a component to another component in conjunction with a bolt so that, during the standard operation of the lawn mower, the components do not move from their position of stable placement.The hex nut in a lawn mower is a small component, and its size means that it can be easily lost, misplaced, or stripped from general wear and tear with long-term use. The hex nut could also be damaged as a result of a collision with a hard object such as a rock or a curb. If any of this occurs, the hex nut should be replaced by this genuine OEM replacement part as soon as possible.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This hex nut is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Weed Eater.

This replacement part is a flange nut. It is a genuine replacement part made by Husqvarna. This part is small yet extremely important to the operation of many different appliances and machines. Nuts are able to hold other parts in place and secure them tightly so that everything can operate smoothly and efficiently. A new flange nut might be needed if the current ones are damaged in any way or even missing. This repair should be fairly easy and only require a screwdriver or pliers if the previous part is lodged in place. It is possible that nuts can become stripped or stuck over time and should be replaced when and if this occurs. Be sure the engine is completely powered down before starting a repair. This part is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer.

This split lock 3/8 washer can be used in a variety of lawn and garden tools. It functions as a component that prevents nuts and bolts from loosening due to vibration when a tool is in use. It’s a split ring with a helical shape, and when fastened together, it exerts a force on the fastener for resistance to motion and increased friction. Typically, this washer is attached on the nut side of a fastener. Over time, the split lock 3/8 washer can start to wear, degrade, or fall apart. This leads to a need for replacement in order to keep the other tool components in the best shape. A flathead screwdriver can be used to pry the washer loose from the bottom or from the split in the washer. Tools needed might include ratchets, wrenches, and a screwdriver. This is a genuine OEM washer known as a 3/8 lock or 3/8 split lock washer and comes as an individual item. It’s gold in color and made out of metal. It can be used for lawnmowers, snowblowers, string trimmers, tillers, wood chippers, and edgers by Husqvarna, Craftsman, Ryobi, Poulan, Weed Eater, Ariens, Murray, and Dixon.

This is a single washer for use with an assortment of lawn and garden equipment. The location of the washer will vary by tool and model. It's made of durable metal and can be used to distribute pressure across another component or can be used to add spacing between two parts. Since washers are small and experience a great deal of pressure, they can become damaged or even lost. If this occurs, other parts will make contact and pressure may not be appropriately distributed in a piece of lawn and garden equipment. If a replacement is needed, locate the area with the washer. Disassemble as needed to visually inspect the part. The washer can be removed by hand or with the help of a flathead screwdriver to pry it up. Replace the original washer with the replacement part and reassemble the equipment. The washer is priced as a single unit and is directly sourced from the manufacturer. It is an authentic OEM replacement component. It's compatible with a variety of string trimmers, tillers, snowblowers, and lawn mowers manufactured by Weed Eater, Husqvarna, and Craftsman.