Parts for Briggs & Stratton 31H777-0177-E1: Engine Sump, Fuel Supply Parts

The crankcase is a metal case over the crankshaft of an engine. It is essential to the operation of the engine as it shields the crankshaft and rods from any debris. It also ensures the pressurization of the chamber and helps to keep pistons and oil moving properly. The crankshaft gasket is part of what keeps the seal and allows the engine to function. It can wear with time or even become dry and cracked. It will cause oil leakage, smoke, and even engine failure. This is a genuine OEM crankcase gasket for lawnmowers, lawn tractors, and small engines produced by Toro, Cub Cadet, MTD, Briggs & Stratton, and Simplicity. It comes as an individual component.

This replacement oil drain plug is a genuine OEM part for a lawn tractor or generator engine. The oil drain plug connects to the base of the oil tank and allows the appliance owner to drain used oil and replace it with new, clean oil. The oil drain plug is threaded to screw into the oil tank and prevent it from popping out of place while the appliance is in use. The most likely reason to replace an oil drain plug is if the old plug's threading has become stripped and no longer holds onto the oil tank. Alternatively, the plug is quite small and could easily be misplaced during an oil change. If lost, oil will leak from the engine, causing parts to overheat. Fortunately, replacing a lost or damaged oil drain plug is simple and only requires screwing a new plug into place. This replacement plug is a high-quality part that fits Craftsman and Murray products. It comes sourced from its original manufacturer and ships individually, without any additional hardware.

The oil seal plays an important role in protecting the oil as it flows into the crankshaft and engine block. It creates a strong seal and ensures that the oil can flow effectively into the engine for proper operation. Over time, rubber seals degrade and wear out, so their replacement will be a part of routine maintenance. If there are oil leaks around the crankshaft or engine, this seal may be the culprit. Replacing the oil seal will ensure proper oil pressure and avoid oil leaks that could lead to more serious damage. When installing this replacement part, it is important to use a rubber mallet or large socket to tap the part into place. This is a genuine Briggs & Stratton part that is a replacement for various compatible small engines. It can fit select engines on Toro, Husqvarna, and Briggs & Stratton equipment. This oil seal is sold individually and compatible with a variety of engines. This OEM replacement is made of durable rubber and sold individually.

This is a fuel line replacement intended to keep a lawnmower's engine running smoothly. It is long enough to make a couple of fuel lines, just cut the fuel line to the desired length and keep the rest as a spare. When a mower doesn't start easily or performs poorly when running, the fuel delivery system may have a problem and will need repair. The fuel line that supplies gas from the tank to the carburetor may be cracked or broken. When this occurs, it is best to replace the fuel line before it becomes a flammable hazard. This is an OEM replacement fuel line sourced from the manufacturer and is sold individually. This replacement part is compatible with different Briggs & Stratton mowers. Remember to use work gloves and drain the gas tank before the installation of this part.

This replacement part is a fuel line. This is a genuine replacement part made by Midwest Engine. This part is commonly found connected to fuel tanks and is able to provide the proper stunned for the fuel to travel through when needed. A new fuel line might be needed if the current one is no longer able to stay connected to the machine, if the current line is leaking in any way, or if the line has become damaged. This can be due to normal wear and tear over time and should be replaced if this is the case. Work gloves are recommended when working with parts that have touched fuel. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This is an inline fuel filter and is an essential part of a fuel system. This part can be found inside the fuel tank or fitted into the fuel line. The fuel filter is responsible for straining particles like water and debris in the fuel so that they won't reach and clog the combustion chamber and eventually reduce the engine's performance. Annoying sputters when starting equipment and uneven idling are incidents that may be related to a clogged fuel filter. To remove a fuel filter, first cut off the fuel supply and then slide the fuel clamps away to remove the filter. Remember to work in a well-ventilated area, with no open flame or fire source, when installing this component. This part works with lawn mowers, snowblowers, tillers, generators, wood chippers, and others with small engines. It is compatible with brands such as Briggs & Stratton, Craftsman, Toro, Cub Cadet, Murray, Lawn Boy, Snapper, and Simplicity. This is a manufacturer-supplied OEM replacement part and comes as an individual component.

This fuel pump is a genuine Midwest Engine part, sold individually. This fuel pump can be used as a replacement part or a lawn tractor. The purpose of a fuel pump is to provide a passageway for fuel to channel through the fuel line and into the fuel tank.The fuel pump of a lawn mower or a lawn tractor might eventually have to be replaced in the event that it suffers damage and cannot perform its crucial function. If the fuel pump has been torn, scraped, punctured, or eroded from general wear and tear with long-term use or as the result of a direct impact with a hard object such as a rock or a curb, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This fuel pump is compatible with the following outdoor appliance brands: Midwest Engine, Briggs & Stratton, Cub Cadet, Simplicity, and Toro.

A hose clamp serves the basic purpose of holding together two connecting hoses. This is a crucial job in an engine. Since there are so many connecting tubes and hoses transferring oil and fuel within an engine, a leak could prove catastrophic. It could not only cause the engine to malfunction but could also become a fire hazard. Replacing a hose clamp is an easy job, though the exact process will depend on where the connection is located. A pair of pliers may be needed. This is a genuine OEM replacement part and will work with a wide range of appliances, such as pressure washers, engines, generators, tractors, mowers, blowers, shredders, and chippers from Murray, Toro, Briggs & Stratton, Snapper, MTD, Lawn-Boy, or Simplicity. This part ships individually.