Parts for Dacor EO230BK: Exterior Assembly Parts

This wafer-head Phillips screw (#8 x 3/8 in) is a factory fastener used to secure panels, brackets, and covers in compatible appliances. Replace a missing or damaged screw to restore a tight, properly aligned fit. What it does:

• Secures sheet-metal or plastic components to the appliance chassis or subassemblies
• Helps maintain proper alignment and reduce vibration or rattling
• Replaces lost, stripped, or corroded screws of the same size and type
• Used at panel, bracket, and cover mounting points designed for this fastener

• One wafer-head Phillips screw (#8 x 3/8 in)

• Disconnect power (and gas, if applicable) before servicing
• Start threads by hand to avoid cross-threading; use a #2 Phillips driver
• Do not overtighten, especially into plastic or thin sheet metal
• Replace only with the same size/type fastener removed to ensure proper fit

The SVC #8 x 3/8 Torx Screw for Walk-Behind Lawn Mowers is an essential component for maintaining the integrity of your mower. Designed specifically for walk-behind models, this genuine OEM part ensures a perfect fit and reliable performance. The #8 x 3/8 size with a Torx head provides secure fastening, preventing loosening during operation and enhancing the overall stability of your lawn mower. Crafted with high-quality materials, this screw offers durability and resistance to wear, making it ideal for frequent use in various outdoor conditions. Installing the SVC #8 x 3/8 Torx Screw is straightforward, allowing you to quickly replace any missing or damaged screws and restore your mower's functionality without hassle. By choosing this genuine OEM part, you can trust in the compatibility and longevity it brings to your Samsung walk-behind lawn mower. Keep your equipment running smoothly and efficiently with this reliable screw, tailored to meet the demands of your gardening tasks.

A replacement service screw used to secure appliance panels and components. Durable fastener sized for common service points, making repairs and panel reassembly quick and reliable. What it does:

• Secures trim, access panels, brackets or small components during service and reassembly
• Commonly used where a shallow truss/wafer head is needed to sit flush without catching
• Helps stop rattling or loose parts caused by missing or stripped screws
• Matches OEM fit for compatible assemblies when the OEM part number is required

• One service screw (#8 x 1/2" truss/wafer head) as specified by the OEM part number

• Use the matching size driver to avoid cam-out and head damage
• Hand-start fasteners to avoid cross-threading; tighten until snug — do not overtighten
• Wear safety glasses and disconnect power before working on electrical appliances
• If a screw threads into plastic or thin sheet metal, consider replacing with the same OEM screw to preserve original threads

The SVC #8 x 3/8 Torx Screw for Walk-Behind Lawn Mowers is an essential component for maintaining the integrity of your mower. Designed specifically for walk-behind models, this genuine OEM part ensures a perfect fit and reliable performance. The #8 x 3/8 size with a Torx head provides secure fastening, preventing loosening during operation and enhancing the overall stability of your lawn mower. Crafted with high-quality materials, this screw offers durability and resistance to wear, making it ideal for frequent use in various outdoor conditions. Installing the SVC #8 x 3/8 Torx Screw is straightforward, allowing you to quickly replace any missing or damaged screws and restore your mower's functionality without hassle. By choosing this genuine OEM part, you can trust in the compatibility and longevity it brings to your Samsung walk-behind lawn mower. Keep your equipment running smoothly and efficiently with this reliable screw, tailored to meet the demands of your gardening tasks.

This service filter conversion kit includes two replacement filter screens that help trap lint and debris in the appliance's airflow path, helping maintain proper ventilation and reduce clogs for more reliable operation. What it does

• Replaces worn or damaged filter screens to restore proper debris capture
• Helps prevent lint buildup that can restrict airflow and reduce performance
• Can resolve symptoms such as reduced drying efficiency, longer cycles, or error codes related to airflow blockage
• Supports routine maintenance and targeted repairs during service

• Two replacement filter screens

• Disconnect power before servicing and follow the appliance's service manual
• Remove and inspect the filter housing; replace both screens for best results
• Use basic hand tools; handle screens carefully to avoid damage to fine mesh
• After installation, run a short test cycle and recheck airflow and seals

This hi-limit thermostat is a temperature safety switch that opens at 275°F to stop the heater when a dryer overheats, protecting the appliance and home. Use it to restore proper over-temperature protection. What it does:

• Monitors dryer temperature and opens the circuit at 275°F to prevent overheating
• Stops power to the heating circuit when the set limit is reached
• Common symptom: dryer heater cuts out or the dryer stops heating intermittently
• Helps prevent damage to the heating element and reduces fire risk when functioning correctly

• Always disconnect power to the appliance before inspecting or replacing the thermostat
• Verify the part number and orientation before removing the old thermostat
• Check continuity with a multimeter to confirm the thermostat opens/closes as expected

This switch assembly restores proper control signaling for the appliance by replacing a worn or damaged switch. It helps return reliable on/off or control-switch operation so the appliance responds correctly to user inputs. What it does:

• Acts as the electrical/mechanical switch that completes or interrupts control circuits
• Replaces a faulty switch that can cause intermittent or no power to selected functions
• Helps resolve symptoms such as unresponsive controls, no-start conditions, or erratic operation
• Matches the OEM shape and mounting for straightforward replacement when compatible

• Disconnect power (unplug or shut off breaker) before starting any repair
• Handle the assembly and connector ends carefully to avoid damage
• Follow the OEM instructions for proper removal and installation

This convection fan blade kit replaces a damaged or worn fan blade in a convection oven to restore air circulation for more even cooking and efficient heat distribution. Designed as a direct-fit service kit. What it does:

• Circulates hot air in the oven cavity to support even baking and roasting
• Replaces cracked, bent, or missing fan blades that can reduce convection performance
• Helps reduce overheating or cold spots that cause uneven cooking
• Can resolve fan-related noises caused by damaged blades

• One convection fan blade kit

• Disconnect power to the appliance before beginning any service
• Allow the oven to cool completely; use proper protective gloves for sharp edges
• Installation generally requires basic hand tools and removal of the rear or rear interior panel

This convection fan is the replacement blower used in Samsung service washer/dryer convection systems to move air for drying and temperature circulation, restoring proper airflow for more even drying performance. What it does

• Circulates hot air through the convection/drying chamber to aid moisture removal and even heat distribution
• Helps maintain designed airflow so cycles reach intended temperatures and dry times
• Failing or noisy fan can cause reduced drying performance, longer cycles, or unusual noises
• Replacing a worn fan can stop rattling, scraping, or vibration caused by damaged blades or bearings

• One convection fan assembly

• Disconnect power before servicing; this part is installed behind access panels and may require basic hand tools
• Handle fan blades carefully to avoid damage; confirm alignment and secure mounting for proper operation
• If replacing due to noise, inspect surrounding shrouds and mounting hardware for wear or debris

This service kit replaces the convection fan used to circulate hot air for more even baking and roasting in compatible ovens. Restores convection performance and helps eliminate uneven cooking or reduced airflow. What it does:

• Replaces the convection fan assembly that moves hot air around the oven cavity
• Helps correct uneven baking or roasting caused by a failed or noisy fan
• Reduces unusual fan noise when the original fan motor or blade is worn
• Restores convection function so recipes relying on fan-assisted cooking perform properly

• Disconnect power and allow the oven to cool before attempting any service
• Handle sharp sheet-metal edges and the fan blades with care
• Follow manufacturer instructions for installation
• Verify fit and function after replacement before normal use