Parts for Briggs & Stratton 131922-2016-01: Flywheels,Electrical,Rewind Parts

Replace a broken starter pulley that prevents your engine from starting. This pulley connects starter components to allow proper engine cranking operation.

Pull cord won't retract or retracts slowly? The rewind spring returns the starter rope to the housing. Common fix for rope retraction issues.

Fix a broken or frayed pull cord with this engine starter rope grip. Common when rope won't retract or handle breaks. Standard DIY repair in 15-20 minutes.

Starter rope won't engage or turn the crankshaft? A worn or corroded starter clutch prevents engine cranking. Direct replacement restores starting function.

Replace an engine ignition coil when there's no spark at the spark plug and your equipment won't start. Compatible with many small engine models.

Replace an engine ignition coil when there's no spark at the spark plug and your equipment won't start. Compatible with many small engine models.

The stop wire is a safety cable device offered on many types of lawn and garden equipment. It is pressed near the upper handle of a device to start it, which lets the blades spin and creates forward motion on equipment that is self-propelled. A stop wire can stretch out over time and will need to be replaced to ensure total safety. If the blade brake control is released and the blades continue to spin for more than a couple of seconds, the wire needs to be replaced.Take the equipment and put it on a flat surface before taking the metal on the stop cable and moving it out of the mower handle. Squeeze the center tabs of the wire with needle-nose pliers and pull the cable end through the bracket. Pull the other end out and then replace it with a new component.This is an authentic OEM replacement part for use with garden equipment engines. It is an individual part that is sourced directly from the manufacturer. This part is compatible with lawnmowers, wood chippers, snowblowers, generators, log splitters, tillers leaf blowers, and pressure washers by Briggs & Stratton, MasterCut, Craftsman, Simplicity, Toro, MTD, Cub Cadet, Lawn-Boy, Murray, and Wheel Horse.

Fix an engine that won't start with this ignition breaker and condenser set. Replaces worn mechanical switch components that fail to create spark.

This recoil starter, also called a rewind starter, drives the combustion process in small lawn and garden equipment engines. By engaging the recoil starter, the engine can be cranked manually with enough speed to get all of the operating systems for the equipment running. If the recoil starter is damaged or broken, the equipment will not start and cannot run.Simple use of the equipment can cause wear and tear that makes the recoil starter fail. If pulling on the cord leads to a feeling of slackness, it's often due to an issue with the recoil starter. The machine will not be able to be used until this component has been replaced. The process involves removing the recoil housing cap, untying the rope, and re-tensioning the spring before reinstalling the rope and housing.This recoil starter is compatible with lawnmowers, generators, snowblowers, leaf blowers, and tillers manufactured by Simplicity, Briggs & Stratton, MTD, Toro, and Cub Cadet. It is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. A wrench will be needed to replace the recoil starter.