Parts for Generac 006414-0: Frame Assy Parts

This ribbed shank fastener is used on power washers to fasten components together. A replacement ribbed shank fastener may be needed if the original part is broken, stripped, or if it has been misplaced or lost. If a ribbed shank fastener is stripped, it will not grip the surface to which it is being placed and will be ineffective. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines. Make sure to use appropriate safety precautions when performing any work on outdoor power equipment.This part is a genuine Generac part and is an OEM part sourced directly from the manufacturer and it is sold individually. This ribbed shank fastener is compatible with power washers manufactured by Generac.

This screw is a genuine Generac part, sold individually. This screw can be used as a replacement part for a pressure washer. The purpose of a screw in a pressure washer is to affix components together.Excessive vibration could knock the screw out of place. The screw can also be subject to stripping, eroding, warping, puncturing, scraping, or other forms of damage while the appliance is in use, in which case it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This is a genuine OEM replacement, directly from the manufacturer. It is sold individually. This screw is compatible with the following outdoor appliance brands: Generac.

This genuine Generac hinge plate handle attaches the upper handle tube and the lower frame hinge plate and tube to one another on pressure washers.The hinge plate handle of a pressure washer can be subject to damage as a result of overuse, exposure to weather, age, or general wear and tear associated with normal long-term usage. The results of such damage could be the detachment of the components that the plate is responsible for connecting, specifically the upper handle tube and the lower frame hinge plate. If this detachment occurs, the damaged hinge plate handle should be removed and a replacement hinge plate handle should be ordered immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This hinge plate handle is compatible with the following brands: Generac and Briggs & Stratton. This part is sold individually.

This authentic OEM replacement hinge plate frame attaches to the handle of a pressure washer and allows the operator to adjust the position of the handle. This way, the operator can get a better angle on whatever it is that they are cleaning and can hold the pressure washer more comfortably. The hinge plate frame attaches to the handle hinge, and as such, it is susceptible to drops and bumps. If an operator accidentally drops their pressure washer gun against a hard surface, the plate frame may break off and be irreparably damaged. If so, a new part will have to be purchased. Switching out a damaged hinge plate frame will require a screwdriver. Be sure to hold onto the two screws removed during disassembly, as they will be needed to attach the new plate frame. This replacement hinge plate frame is compatible with pressure washers made by Generac. As such, this part comes sourced directly from Generac. No additional hardware is included in this shipment. If the two assembly screws are lost, they will need to be bought separately.

This is a replacement power switch that is made to fit select models of outdoor power pressure washers. The on/off power switch is responsible for engaging the electricity in the unit so that it can operate. The power switch is typically located in a recessed area on the device for additional protection, but it can still become damaged as a result of an impact. In some cases, the electrical functions of the switch could fail. In either situation, a replacement with a genuine OEM part will resolve the issue. When the pressure washer on/off switch is inoperable, owners will be unable to use the machine until it is replaced. It may even present a fire risk if there is a short, which is why an immediate replacement is recommended. This OEM on/off switch is manufactured as an identical replacement for machines made by Generac and is compatible with dozens of different models. It is made of durable plastic and metal components and sold as a single unit. The hardware needed to attach the new power switch will require an additional purchase. It is imperative for owners to unplug their pressure washer and wear gloves whenever replacing electrical parts like this on/off switch.

This is a hose designed to be used with pressure washers by Generac. It has an M22 connection and is rated for up to 3100 PSI. The hose is used for washing automobiles, boats, and other vehicles. The water moves from the pressure washer into the hose and the stream can be directed onto the automobile to remove dirt and other debris from its surface. The hose can wear out over time or become damaged and will need to be replaced.The easiest way to determine where the hose needs to be replaced is by doing a visual inspection. Look over the hose for cracks, holes, or other damage. If the hose is starting to wear out, it will also need to be replaced. A broken or damaged hose may leak or not provide the proper water pressure. Remove the original hose and connect the new one to the equipment.This hose is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The hose is designed to be used with several pressure washers manufactured by Generac.