Parts for Ge ZIBI240HAII: Freezer Controls & Components Parts

This 120V LED interior light bulb replaces a worn or burned-out refrigerator/freezer light to restore bright, energy-efficient illumination so you can see contents clearly without frequent bulb changes. What it does

• Provides steady, cool-running light for appliance interiors
• Replaces dim, flickering, or non-working interior bulbs
• Uses LED technology for reduced energy use and longer life versus incandescent
• Fits standard appliance interior light fixtures designed for 120V bulbs

• Always disconnect power to the appliance before replacing the bulb to avoid electrical shock.
• Allow the old bulb and surrounding area to cool before handling.
• Install bulb by hand; do not overtighten. Test the light after restoring power.
• If the light still fails after replacing the bulb, check the socket, switch, or wiring.

This temperature sensor (thermistor) senses cabinet/evaporator temperature so the control can maintain proper cooling. Replaces a failed sensor to help restore accurate temperature readings and stable refrigerator operation. What it does:

• Measures internal temperature and sends readings to the control board
• Helps control compressor and fan cycling for consistent cooling
• Commonly associated with refrigerators that run continuously, cool inconsistently, or show incorrect temperature
• Can affect defrost cycles if the evaporator reading is incorrect

• Disconnect power before accessing components to avoid electrical shock
• Handle the sensor and lead carefully; avoid kinking or sharp bends in the wire
• Ensure the connector is fully seated and any mounting clip is snug but not overtightened
• Some models require removing interior panels or the evaporator cover for access

This fan replacement assembly circulates air to help maintain proper cooling and temperature balance in the appliance. Replacing a worn or damaged fan restores airflow and reduces noise for more consistent performance. What it does:

• Moves air through the appliance to support cooling and ventilation
• Restores normal airflow when the original fan is noisy, scraping, or has stopped spinning
• Helps prevent temperature unevenness caused by restricted or failed airflow
• Works as the rotating blade assembly that couples to the appliance fan motor

• Disconnect power to the appliance before beginning any service
• Handle the fan blades carefully to avoid bending or injury
• Verify proper orientation and clearance for the blades before restoring power
• If the fan does not spin after installation, check the motor coupling and electrical connections.

The Electromechanical Icemaker Kit is an OEM replacement part for GE refrigerators. It includes the ice maker assembly components responsible for harvesting, ejecting, and monitoring the ice-making process.

Symptoms of a faulty electromechanical kit include: 

• Ice not being produced or dispensing properly
• The ice maker failing to turn on or stop automatically
• Strange noises emanating from the ice maker

Causes can be worn parts like the ejector assembly or drive motor, as well as electrical malfunctions. Continued use puts wear on components that regulate ice production.

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. Replace yours today for reliable ice on demand.

This air flow cover directs cold air from the evaporator into the refrigerator compartment to help maintain even cooling and protect the evaporator coil. It's a direct-fit replacement for worn or damaged covers. What it does:

• Channels airflow from the evaporator to the fresh-food compartment for more consistent temperatures
• Helps prevent direct contact with the evaporator coil and reduces frost buildup on surrounding areas
• Restores proper air circulation when cracked, broken, or missing
• Can reduce localized warm spots or uneven cooling linked to damaged airflow ducts

• One air flow cover

• Disconnect power to the appliance before starting any repair
• Remove interior panels as needed to access the evaporator area; keep track of fasteners
• Handle plastic parts carefully to avoid breaking tabs or clips; replace any damaged clips
• After installation, restore power and run a quick temperature check to confirm airflow

This refrigerator door gasket creates an airtight seal around the door to help keep cold air in and warm air out, preserving food freshness and improving energy efficiency. What it does:

• Seals the refrigerator door to maintain proper internal temperature
• Prevents warm air infiltration that can cause frost buildup or rapid food spoilage
• Helps reduce compressor run time and energy waste when gasket is sealing correctly
• Restores a tight seal when an old gasket is cracked, torn, or deformed

• Disconnect power to the appliance before starting any repair
• Remove the old gasket and clean the door mating surface before installing the replacement
• Press the new gasket into the door channel and confirm an even, continuous seal around the door

This evaporator cover protects the freezer evaporator coil and helps direct airflow for consistent cooling. It replaces a cracked or missing cover to reduce frost buildup and keep internal components shielded from debris. What it does:

• Covers and protects the freezer evaporator coil from contact and contamination
• Helps direct cold airflow across the evaporator for even freezer temperatures
• Can reduce frost accumulation and airflow obstructions when damaged or missing
• Addresses symptoms like excess frost on the evaporator, unusual airflow, or exposed components

• One evaporator cover

• Disconnect power to the appliance before servicing to avoid electrical injury
• Handle carefully to avoid bending or cracking the plastic; ensure proper fit over the evaporator coil

This electronic control board assembly replaces the main logic board that governs refrigerator functions, restoring normal operation of controls and timed cycles. Use this board when the appliance shows control or communication failures. What it does:

• Manages electronic signals for temperature control, cycle timing, and user interface responses
• Controls compressor, defrost sequencing, and fan operation as directed by sensors and user settings
• Can resolve symptoms such as unresponsive display/buttons, intermittent cooling, or erratic cycle behavior
• Helps clear failures caused by a damaged or non-responsive main control board

• Disconnect power to the appliance before starting work to avoid shock or damage
• Handle the board carefully and avoid touching contacts; use anti-static precautions if available
• Reassemble panels and confirm proper operation after restoring power.