Parts for Ge CWE23SSHBSS: Freezer Door Parts

Filter Material: Carbon Block. Micron Rating: 0.5. Flow Rate: 0.5 gpm. Operating Pressure: 120 psi. Approximate dimensions: 10" x 1-3/4"

The GE Refrigerator Water Filter RPWFE is an OEM part for GE refrigerators. This advanced water filter is crucial for removing contaminants and impurities from your refrigerator's water supply, ensuring you have access to clean, fresh-tasting drinking water and ice. Utilizing a state-of-the-art filtration process, the RPWFE filter is capable of reducing various contaminants, including lead, chlorine, and five pharmaceuticals, providing peace of mind about the quality of your water.

Over time, water filters can become clogged with particles and contaminants, leading to a decrease in water flow and a reduction in the effectiveness of filtration. It's important to replace your refrigerator water filter as recommended by the manufacturer, typically every six months, to ensure optimal performance and maintain the quality of your water.

Symptoms of a filter needing replacement include:

• Reduced water flow from the dispenser.
• Unpleasant taste or odor in the water or ice. 
• The refrigerator's water filter indicator light turns on

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

A stainless-steel handle fastener that secures the refrigerator door handle to the door assembly for a solid, wobble-free grip. Use to restore a loose, stripped, or missing handle attachment point. What it does:

• Secures the door handle to the door/handle mounting point so the handle stays tight and aligned.
• Stops handle movement, wobbling, or rattling caused by a worn or missing fastener.
• Replaces a corroded or damaged fastener to restore a secure connection.
• Stainless finish resists corrosion at the handle mounting point.

• Disconnect power to the appliance before starting work whenever access to internal parts is required.
• Use the correct screwdriver or bit; turn carefully and avoid sideways force on the handle.
• Do not overtighten—over-torquing can strip threads or crack surrounding trim.
• Keep removed hardware and any trim pieces for reassembly; inspect handle and threaded inserts for damage.

A .250-inch diameter set screw used to secure shafts or components in place, preventing unwanted movement and maintaining proper alignment. Small, durable fastener for appliance assemblies where a countersunk or threaded retention point is required. What it does

• Secures collars, pulleys, knobs, or shafts to prevent slipping or rotation
• Restores proper engagement when a loose or missing set screw causes wobble or misalignment
• Helps eliminate intermittent operation caused by shifted mechanical parts
• Works where a compact, recessed fastening point is needed

• Disconnect power and remove access panels before servicing
• Start threads by hand to avoid cross-threading; tighten with the correct hex/driver
• Do not overtighten—use firm, controlled torque to avoid damaging threads or mating parts
• Replace only with the same size and thread type specified by the OEM

The Set Screw is an OEM part for GE refrigerators. It is used to secure various components within the refrigerator, ensuring they remain firmly in place during operation. 

Over time, a set screw can become worn, stripped, or lost due to regular use or during repairs. A missing or damaged set screw can lead to loose components, which may cause operational issues or even damage other parts of the refrigerator.

Symptoms of a bad Set Screw include:

• Loose or rattling components inside the refrigerator
• Difficulty in keeping parts securely fastened
• Noise coming from the area where the screw is used
• Misalignment of parts, leading to improper functioning

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Freezer Door Gasket is an OEM part for GE refrigerators. As the primary seal between the freezer door and the frame, it plays a critical role in maintaining proper insulation and temperature regulation within the freezer compartment. The gasket is designed with insulating materials to prevent the loss of cold air and absorption of warm air when closing the door. 

Causes of a bad gasket can include cracks, tears, or breaks that compromise the insulation over time due to regular use and door openings/closings. 

Symptoms of a bad gasket include: 

• Rising temperatures within the freezer, leading to melting or frost buildup 
• Accumulation of ice around the door seal
• Difficulty closing/sealing the freezer door tightly 
• Droplets or puddles of water forming around the base of the door

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

A replacement 1/4-20 screw that secures panels, brackets, and components on compatible appliances for reliable fit and safe operation. Use this fastener to restore proper assembly and reduce rattles or loose parts. What it does:

• Threads into 1/4-20 tapped holes to hold panels, braces, or hardware
• Restores secure attachment where a missing or stripped screw allowed panels or trim to shift
• Helps eliminate vibration noise caused by loose fasteners
• Matches OEM fit for correct alignment and clearance

• Disconnect power to the appliance before servicing to avoid electrical hazards
• Use the correct driver or socket to avoid stripping the head
• Start threads by hand to prevent cross-threading; tighten securely but do not overtighten
• Keep hardware and small parts away from children and pets

This right-hand freezer door bracket secures the freezer door hinge and helps maintain proper door alignment for a tight seal and smooth operation. It's a direct-fit replacement designed to restore correct door positioning. What it does:

• Supports the freezer door hinge assembly to keep the door aligned
• Helps maintain an even door seal to prevent cold air loss
• Reduces door sag, rubbing, or uneven gaps that can cause closing issues
• Stops rattling or movement caused by a worn or broken bracket

• One right-hand freezer door bracket

• Disconnect power to the appliance before starting any repair
• Basic hand tools required; door may need partial removal for access
• Align bracket and hinge per service instructions to ensure proper door fit

A hex washer-head screw that secures panels and components in household appliances, helping restore stable, rattle-free mounting. Ideal when a mounting screw is missing, stripped, or rusted. What it does:

• Fastens panels, brackets, and internal components with a 1/4-20 thread for secure connections
• Replaces missing or damaged screws that cause loose panels or vibration noises
• Restores proper alignment of parts to prevent rattling and wear
• Works where a hex washer-head profile is required for flush, locked seating

• One hex washer-head screw, 1/4-20 x 3/4

• Use the correct 1/4-inch hex or socket driver to avoid stripping the head
• Power off and unplug the appliance before accessing internal components
• Do not overtighten; snug until secure to avoid damaging threads or parts
• If screw threads are damaged, replace with the matching OEM part for best fit

This freezer door bin support secures the door bin to the freezer door liner, keeping it level and firmly in place. Replace a cracked or missing support to restore stable storage and prevent the bin from popping off the door.

• Supports and locks the freezer door bin to the door liner
• Helps prevent bin wobble, sagging, or unexpected drops
• Replace if tabs are broken, the support is cracked, or the bin won't stay seated
• Common symptoms: bin tilts, falls off, or rattles on the door

• Unplug the refrigerator and remove items from the bin before servicing
• Lift out the door bin to access the support
• Release the old support from the liner; align and press the new support fully into place until secure
• Reinstall the bin and confirm a snug, stable fit before restocking

Restore usable storage on your freezer door with this replacement bin. It mounts to the door to organize small items and keep them secure when opening and closing the freezer.

• Attaches to the freezer door to hold and organize frozen items
• Helps prevent items from tipping or falling when the door moves
• Replace if the bin is cracked, broken, warped, missing, or won't stay seated
• Designed to fit the specified door position on models that use this bin

• Remove the old bin by lifting up and pulling out of the door slots
• Align the new bin's tabs/hooks with the door rails and slide down until fully seated
• No tools or electrical work required; handle plastic carefully to avoid cracking
• Allow it to reach room temperature before installing