Parts for Bosch B22CS80SNS/03: Freezer Parts

The Active Carbon Filter is an OEM part for Bosch refrigerators. This filter helps reduce odor-causing substances inside the refrigerator for fresher preserved food. It traps molecular impurities through an advanced filtration process.

Causes of a filter requiring replacement include normal lifespan expiration as indicated on the packaging. For optimal results, these filters should be replaced according to manufacturer guidelines.

Symptoms of a spent filter include:

• Return of odors to the refrigerator interior
• Potential taste transfers between strong smelling foods
• Reduced effectiveness of the odor reduction system

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Water Filter is an OEM part for Bosch refrigerators. This part removes impurities and contaminants from the water supply to your appliance. This part ensures that the water and ice dispensed by your refrigerator are clean, taste fresh, and are free of common waterborne particles and substances. 

Over time, the water filter can become clogged with sediments and contaminants, reducing its effectiveness and potentially affecting the taste and quality of the water and ice. Regular replacement is essential for maintaining optimal performance.

Symptoms of a bad Water Filter include:

• Unpleasant taste or odor in the water or ice
• Decreased water flow to the dispenser or ice maker
• Visible particulate matter in the water or ice cubes

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This heating element assembly provides the heat source used to warm air in the appliance, restoring proper drying and heating performance when the original element fails. It replaces a worn or broken heater to help recover normal cycle temperatures. What it does:

• Generates heat for the appliance's drying/heating cycles.
• Commonly replaces a unit that produces little or no heat.
• Can stop overheating or help if cycles cut out due to an open element.
• Works with the appliance's thermostats and thermal cutoffs to regulate temperature.

• Disconnect power (unplug or shut off breaker) before starting any repair.
• Handle the element carefully to avoid bending or damaging the coil and terminals.
• Inspect and test related parts (thermal fuse, thermostats, wiring) for faults—replace as needed.

Temperature sensor that monitors internal appliance temperature and provides the control board with accurate readings. Replacing a faulty sensor helps restore correct temperature regulation and prevents food spoilage or freezer issues. What it does:

• Sends temperature readings to the appliance control so cooling and defrost cycles can run correctly.
• Common symptoms of a failing sensor: inconsistent temperatures, refrigerator or freezer running too warm or too cold, compressor or fans cycling abnormally, or ice maker not advancing.
• Can affect temperature-based functions on models that use this sensor for those controls.
• Replace if the sensor shows open/short behavior or gives inconsistent readings compared to expected operation.

• Always disconnect power to the appliance before servicing to avoid electric shock.
• Handle the sensor and probe carefully; the tip and wire connections are fragile.
• Reconnect wiring and mounting securely; avoid pinching the sensor wire or contaminating the probe.
• After installation, restore power and verify the appliance reaches and maintains expected temperatures.

This thermal fuse is a single temperature-cutout safety device that stops electrical flow when an appliance overheats, protecting wiring and components. Replace a failed fuse to restore normal heating control and safety. What it does:

• Opens the circuit when internal temperature exceeds safe limits to prevent overheating
• Stops power to the heating system or motor circuit when the fuse has blown
• Common symptom: appliance runs but no heat or heating element does not activate
• Common symptom: appliance stops mid-cycle or will not start due to open thermal circuit

• One thermal fuse

• Disconnect power before accessing or replacing any internal components
• Locate the thermal fuse on the appliance wiring or near the heater assembly per your model's service guide
• Verify an open fuse with a multimeter; replace with the exact part number—do not bypass

The Fan Motor is an OEM part for Bosch refrigerators. It is responsible for circulating cold air throughout the freezer compartment to keep your freezer contents frozen.  

A bad fan motor can occur due to normal wear and tear, electrical malfunctions, or damage from frost buildup or debris. Signs of a faulty fan motor include reduced cooling performance, unusual noises coming from the freezer, or the presence of frost or ice buildup.

Symptoms of a bad fan motor include:

• Insufficient cooling in the freezer  
• Unusual noises 
• Excessive frost or ice buildup  

Replace your faulty fan motor with this genuine OEM Bosch part to restore your refrigerator. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Fan Motor is an OEM part for Bosch refrigerators. It is responsible for circulating cold air throughout the freezer compartment to keep your freezer contents frozen.  

A bad fan motor can occur due to normal wear and tear, electrical malfunctions, or damage from frost buildup or debris. Signs of a faulty fan motor include reduced cooling performance, unusual noises coming from the freezer, or the presence of frost or ice buildup.

Symptoms of a bad fan motor include:

• Insufficient cooling in the freezer  
• Unusual noises 
• Excessive frost or ice buildup  

Replace your faulty fan motor with this genuine OEM Bosch part to restore your refrigerator. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Fan Motor is an OEM part for Bosch refrigerators. It is responsible for circulating cold air throughout the freezer compartment to keep your freezer contents frozen.  

A bad fan motor can occur due to normal wear and tear, electrical malfunctions, or damage from frost buildup or debris. Signs of a faulty fan motor include reduced cooling performance, unusual noises coming from the freezer, or the presence of frost or ice buildup.

Symptoms of a bad fan motor include:

• Insufficient cooling in the freezer  
• Unusual noises 
• Excessive frost or ice buildup  

Replace your faulty fan motor with this genuine OEM Bosch part to restore your refrigerator. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This ice cream maker attachment lets you churn small-batch frozen desserts and sorbets at home for smoother, creamier results than hand-mixing. It pairs with compatible countertop mixers to simplify dessert prep. What it does:

• Holds and churns mix while freezing to reduce ice crystals and improve texture
• Circulates ingredients with a dedicated dasher for even freezing and consistent results
• Good for ice cream, gelato, sherbet, and sorbet; helps prevent icy, grainy batches
• Designed as a mixer-powered accessory — relies on the mixer drive to spin the dasher

• Attach to the mixer per your mixer's instructions; ensure the drive coupling is properly engaged before use
• Pre-freeze the bowl per recipe/manufacturer directions for best results
• Clean removable parts after each use; avoid submerging any motorized or drive components
• Follow all safety and operating instructions from your mixer manufacturer

This ice crusher assembly grinds and breaks ice inside the dispenser so your refrigerator can dispense smaller, usable ice pieces. It restores proper ice flow and reduces large ice clumps that can block the dispenser. What it does:

• Rotates and crushes large ice pieces for smoother dispensing
• Prevents ice jams and reduces strain on the dispenser mechanism
• Reduces large, hard ice chunks that can cause noisy operation
• Helps restore normal ice dispensing when the crusher is worn or damaged

• One ice crusher assembly

• Disconnect power to the refrigerator before servicing to avoid electrical shock
• Handle carefully; parts may have sharp edges and small components
• Test the dispenser after reinstalling to confirm proper operation

This replacement drawer restores storage and access for your appliance's lower compartment, providing a smooth, secure tray for holding items and keeping interiors organized. Designed to match OEM fit and function for straightforward swaps. What it does:

• Replaces a cracked, warped or missing drawer to restore usable storage capacity
• Slides in and out to allow easy access to items stored in the compartment
• Helps prevent items from shifting or falling during normal use
• Reduces rattling or binding caused by damaged or worn trays

• Remove power and empty the compartment before replacing the drawer
• Slide the old drawer out per your appliance's service instructions; align and seat the replacement on the drawer rails
• Check rails and rollers for wear; replace worn rails or rollers separately if needed

The Fan Motor is an OEM part for Bosch refrigerators. It is responsible for circulating cold air throughout the freezer compartment to keep your freezer contents frozen.  

A bad fan motor can occur due to normal wear and tear, electrical malfunctions, or damage from frost buildup or debris. Signs of a faulty fan motor include reduced cooling performance, unusual noises coming from the freezer, or the presence of frost or ice buildup.

Symptoms of a bad fan motor include:

• Insufficient cooling in the freezer  
• Unusual noises 
• Excessive frost or ice buildup  

Replace your faulty fan motor with this genuine OEM Bosch part to restore your refrigerator. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This dispenser flap is the replacement flap that seals and releases detergent in the dishwasher dispenser, helping the detergent stay in place until the wash cycle. It restores proper detergent release and prevents premature opening of the dispenser. What it does:

• Seals the detergent compartment so powder or tablets stay in place before the wash.
• Opens/releases detergent at the programmed point in the cycle for effective cleaning.
• Helps prevent detergent from leaking into the tub before the wash starts.
• Commonly replaced when the dispenser door won't stay closed or the flap is broken.

• One replacement dispenser flap.

• Disconnect power to the appliance before starting any repair.
• Remove the dishwasher door inner panel to access the dispenser; keep screws organized.
• Inspect the dispenser assembly for additional damage; replace other worn components as needed.

This water inlet valve controls dishwasher water flow, allowing the appliance to fill when a wash cycle starts. Replaces a worn or leaking inlet valve to restore proper water fill and cycle operation. What it does:

• Opens and closes to admit water into the dishwasher at the start of a cycle.
• Stops water flow when the correct fill level or fill time is reached.
• Commonly replaced when you see slow fills, no fill, or visible leaks at the valve.
• Works with the dishwasher's control system to regulate water delivery during cycles.

• One water inlet valve as shown

• Disconnect power and shut off the water supply before removing or installing the valve.
• Inspect hoses and fittings for damage and replace any worn seals to prevent leaks.
• Tighten connections securely but avoid over-tightening plastic fittings.

This icemaker assembly replaces the frozen-water harvesting unit that makes and dispenses ice in compatible refrigerators, restoring reliable ice production and reducing gaps in supply. What it does:

• Cycles and ejects formed ice into the ice bin so the refrigerator can store and dispense ice
• Restores ice production when the dispenser or bin stays empty
• Helps stop intermittent ice delivery or small batches caused by a failing icemaker
• Works with the refrigerator's water feed and control signals to produce cubes on schedule

• One icemaker assembly

• Disconnect refrigerator power and water supply before starting; follow manufacturer safety instructions
• Handle the unit carefully to avoid damaging fill tubes, connectors, or the ejector mechanism
• Confirm refrigerator model compatibility and alignment of electrical/water connections before final installation

Left-side mounting clip that secures a dishwasher door panel or trim to the frame, restoring proper alignment and stopping rattles. Replaces a worn or broken clip to help the door close evenly and maintain a good seal. What it does:

• Secures the inner door panel/trim to the door frame to maintain alignment
• Keeps the door panel from shifting or vibrating during operation
• Helps prevent leaks and poor door closure caused by a loose panel
• Restores proper fit after a cracked or broken clip causes misalignment

• Disconnect power and water supply before starting any repair
• Support the door/panel while removing and installing the clip to prevent damage
• Use common hand tools; avoid forcing parts—ensure clip seats fully before reassembly

This Boldclip secures the right-side trail/track assembly so the appliance door or drawer runs smoothly and stays aligned. A small but critical mounting clip, it restores proper panel fit and quieter operation when replacing a worn or broken clip. What it does:

• Holds the right-side trail/track in place so the door/drawer slides and aligns correctly
• Prevents excessive play or rubbing that can cause noise or uneven closing
• Restores correct panel fit when the original clip is cracked, bent, or missing
• Works as the right-hand mounting clip in the trail/track assembly

• One right-side Boldclip

• Disconnect power and remove any panels or trim before accessing the track assembly
• Inspect surrounding track, rollers, and fasteners; replace damaged components as needed
• Install with appropriate fasteners and correct orientation for the right-side track