Parts for Ge XCM16SMBWW: Freezer Parts

White freezer door handle replaces worn, cracked, or missing grips. Restores easy door opening and clean appearance using original mounting points.

A single white cover screw used to secure trim or access covers on compatible appliances, keeping panels and controls fastened and visually finished. Small replacement that restores proper fit and appearance. What it does

• Secures a cover, trim piece, or access panel to the appliance
• Keeps wiring or internal components covered and protected from incidental contact
• Restores a flush, finished look to the control or trim area
• Helps eliminate rattles or loose-fitting panels caused by a missing or stripped screw

• One white cover screw

• Use the correct screwdriver and turn slowly to avoid stripping the head or threads
• Do not overtighten; tighten until snug and the cover sits flush
• Disconnect power before accessing internal panels or wiring
• Replace or repair the threaded insert before installing

White freezer door assembly with sealing gasket. Replace when door is damaged or gasket is worn to maintain consistent temperatures and reduce frost buildup. Confirm fit with your model number.

Cracked or missing light cover causing exposed bulbs? This LED light cover protects the bulb and diffuses light evenly. Simple 5-minute snap-in install.

White plastic cover that conceals the top door hinge hardware on chest and freestanding freezers. Replaces cracked, broken, or missing hinge covers.

White bottom hinge cover for chest and freestanding freezers. Replaces cracked, broken, or missing covers that expose the hinge mechanism at the base.

This freezer door hinge replaces a worn or damaged hinge to restore proper door alignment and smooth opening. It helps maintain a tight door seal for efficient cooling and prevents rubbing or sagging doors that can cause air leaks. What it does:

• Supports and pivots the freezer door for consistent opening and closing.
• Restores correct door alignment to improve gasket sealing and cold retention.
• Stops door sag, scraping, or uneven gaps that can lead to temperature issues.
• Works with factory mounting points to match original door movement.

• Installation requires basic hand tools; inspect mating hardware and holes for wear before installing.
• Keep the door supported or use a helper during removal/installation to avoid injury or damage.
• Tighten fasteners to OEM torque if available; do not overtighten plastic or painted surfaces.
• If hinge mounting points or door edges are damaged, replace or repair those components for a secure fit.

Upper storage basket for chest and freestanding freezers. Organizes frozen foods in the top section. Replace if cracked, warped, or broken from use.

Green indicator light for chest freezers signals normal operation. Replace if light fails to illuminate or stays dim. Verify fit with your model number.

This light cover is the interior lens that protects the refrigerator bulb and spreads light evenly across the compartment so items are easier to see. Durable plastic helps prevent direct contact with the bulb while allowing bright, diffuse illumination. What it does

• Shields the refrigerator light bulb from splashes and accidental contact.
• Diffuses light for more even illumination across shelves and bins.
• Helps maintain a clean appearance by covering the lamp assembly.
• Commonly replaced when cracked, yellowed, or missing to restore proper lighting.

• One refrigerator light cover/lens.

• Disconnect power to the appliance before beginning work to avoid electric shock.
• Typically snaps into place or secures with a single screw; keep any removed fasteners for reassembly.
• Handle the lens gently to avoid cracking; use a soft cloth to clean.

Fix water pooling inside your freezer with this interior drain plug. Seals the drain opening to direct defrost water properly and prevent leaks. Easy DIY fix.

Door lock secures the appliance door during use, allowing cycles to start and run safely. Replace a broken or failing lock to restore proper closure and prevent interruption of operation. What it does:

• Latches and holds the door closed so the appliance can start and complete cycles.
• Triggers the control to allow operation only when the door is fully closed.
• Common symptom: appliance won't start or stops mid-cycle because the door won't latch.
• May be needed if the door feels loose, won't stay closed, or you hear clicking when trying to start.

• Disconnect power (and water, if applicable) before starting any repair.
• Handle parts carefully; avoid forcing or bending mounting tabs during installation.
• Verify proper alignment and engagement of the latch before restoring power.

This cover door lock is the replacement plastic cover that protects and secures the appliance's door latch mechanism, helping the door close and stay latched reliably. It restores proper fit and reduces noise from a damaged latch area. What it does:

• Protects the door latch assembly from dirt, debris and accidental impact
• Helps the latch engage smoothly so the door closes and stays closed
• Replaces cracked, broken or loose covers that cause rattling or misalignment
• Supports normal door operation without altering latch function

• Disconnect power to the appliance before starting any repair
• Basic hand tools are typically required; follow manufacturer disassembly steps
• Handle plastic parts gently to avoid cracks during installation
• If the latch mechanism is damaged, replace the latch assembly as well

Exterior drain plug seals the freezer's drain opening. Replaces cracked, broken, or missing plugs to prevent leaks and maintain a watertight seal.

Freezer won't stop running or won't turn back on? A faulty thermostat is the likely cause. This part monitors and controls interior temperatures.

A replacement harness door cover that protects and secures the wire harness at the appliance door, preventing chafing and moisture exposure for reliable electrical connections. What it does:

• Covers and organizes the door wiring harness to reduce rubbing and wear
• Helps keep wiring routed away from moving parts and sharp edges
• Protects harness from dirt and moisture near the door area
• Can resolve intermittent door-related electrical issues caused by damaged wiring

• One harness door cover

• Disconnect power to the appliance before starting any repair
• Install requires access to the door wiring area; panel removal may be necessary
• Handle carefully to avoid damaging adjacent wiring or connectors

This replacement power cord clamp secures the appliance's main power cord where it passes through the cabinet, protecting wiring from abrasion and reducing strain on the cord connection for safer, more reliable power delivery. What it does:

• Anchors and locks the power cord at the cabinet entry to prevent tugging or accidental unplugging
• Prevents cord chafing and wear where the cord contacts sharp edges
• Helps avoid loose electrical connections that can cause intermittent power or arcing
• Keeps cord routing neat and maintains correct positioning for service access

• Disconnect power before starting any repair; appliance is de-energized
• Remove the rear access panel to reach the cord entry; replace the old clamp and secure per original hardware
• Position the cord so the clamp grips the jacket and does not pinch wires
• If screws or grommets are damaged, replace them—only reuse hardware confirmed intact

Power cord for chest freezers. Connects your freezer to the electrical outlet. Replace if damaged, frayed, cracked, or missing to restore power connection.

This sealed component removes moisture and contaminants from the R600 refrigerant system, typically located in the sealed system behind the refrigerator. Replace if the refrigerator isn't cooling properly, runs constantly, or if a technician identifies refrigerant system contamination.

Chest freezer not cooling or running constantly? The compressor circulates refrigerant to maintain temperature. Professional repair recommended due to complexity.

This thermostat knob is the user control for adjusting oven/refrigerator temperature settings, restoring a comfortable, easy-to-read control surface. It replaces a worn, cracked, or missing knob so you can set temperatures accurately. What it does:

• Fits over the thermostat control shaft to provide a grip for temperature adjustments
• Restores lost markings or grip from a broken or faded knob
• Helps stop slipping or incomplete engagement when turning the control
• Commonly used when the original knob is cracked, stripped, or missing

• Unplug the appliance or shut power off at the breaker before servicing
• Pull the old knob straight off the control shaft; press the replacement onto the shaft until fully seated
• If the knob has an indexing flat, align it with the control shaft flat for proper fit
• If resistance or fit issues occur, verify the control shaft type matches before forcing

This is a self-tapping ST3.5 x 9.5 screw used to secure panels, trim and small appliance components. It replaces missing or damaged screws to restore proper fit and prevent rattling or loose parts. What it does:

• Fastens control panels, brackets, trim pieces and light assemblies
• Replaces stripped, corroded or missing screws that allow parts to shift
• Restores secure mounting and helps eliminate vibration noise
• Small size for low-profile applications where a compact fastener is required

• Use the correct sized Phillips or Pozidriv driver to avoid cam-out
• Start screws straight and drive until snug; avoid overtightening to prevent stripping
• Disconnect power and remove any sharp panels before working to stay safe
• Keep a small parts tray to avoid losing tiny screws during repair

Can't lock your freezer door or need child-safety access control? This door lock key engages the latch mechanism to secure the door and restrict access.

This power cord fix belt is a small cord-retaining strap that secures the appliance power cord to the cabinet. It helps keep the cord in place to reduce strain on the cord connection and maintain a reliable power connection. What it does:

• Holds the power cord firmly against the appliance frame to prevent tugging on the wiring
• Reduces movement that can loosen or wear the cord connection over time
• Helps prevent intermittent power or connection issues caused by a shifted cord
• Keeps cord routing neat and reduces stress at the plug/body interface

• One power cord fix belt

• Always disconnect power before accessing the cord or electrical panels
• Typically installs behind a rear access panel or at the cord entry point; basic tools may be required
• Position so the cord is secure but not pinched; replace if cracked or brittle

Rubber grommet that cushions and seals wiring or components passing through freezer panels. Replace if cracked, missing, or worn to prevent chafing.

Chest freezer not cooling or not starting? This compressor electrical assembly connects power to the compressor. Moderate DIY repair in 1-2 hours.

A replacement badge nameplate that restores the exterior appearance of your appliance by covering the brand/name area. Keeps the unit looking finished and professional after repairs or panel replacement. What it does

• Replaces a missing, cracked or faded nameplate badge to restore the appliance's exterior appearance.
• Provides the visible brand/name emblem usually mounted on the control panel or door.
• Helps hide mounting holes or blemishes left from previous badge removal.
• Common symptom: visible missing or damaged emblem that affects the appliance's look.

• Inspect the old badge to determine if clips, screws or adhesive secure the replacement; transfer any reusable fasteners.
• Clean the mounting surface before installing to ensure good adhesion or clip engagement.
• Use appropriate hand tools; avoid forcing tabs or clips to prevent panel damage.

Fix cooling issues in your refrigerator with this process valve. Regulates refrigerant flow for proper temperature control. Red cap design for R600 systems.