Parts for Ge XCM22DMCWW: Freezer Parts

White freezer door handle replaces worn, cracked, or missing grips. Restores easy door opening and clean appearance using original mounting points.

A single white cover screw used to secure trim or access covers on compatible appliances, keeping panels and controls fastened and visually finished. Small replacement that restores proper fit and appearance. What it does

• Secures a cover, trim piece, or access panel to the appliance
• Keeps wiring or internal components covered and protected from incidental contact
• Restores a flush, finished look to the control or trim area
• Helps eliminate rattles or loose-fitting panels caused by a missing or stripped screw

• One white cover screw

• Use the correct screwdriver and turn slowly to avoid stripping the head or threads
• Do not overtighten; tighten until snug and the cover sits flush
• Disconnect power before accessing internal panels or wiring
• Replace or repair the threaded insert before installing

Cracked or missing light cover causing exposed bulbs? This LED light cover protects the bulb and diffuses light evenly. Simple 5-minute snap-in install.

White top hinge cover for chest and freestanding freezers. Replaces cracked, broken, or missing hinge covers. Snaps into place over lid hinge assembly.

White plastic bottom hinge cover for chest and freestanding freezers. Replaces cracked, broken, or missing hinge covers that expose hardware.

Upper sliding basket organizes frozen foods in your freezer. Replace if cracked, broken, or missing to restore storage capacity and visibility.

The Shelf Support is an OEM part for GE chest freezers. It provides a stable frame to neatly organize frozen foods both vertically and horizontally. Properly supported shelves are crucial in chest freezers for airflow and preventing items from falling between shelves during opening and closing. 

Symptoms of a defective shelf support include:

• Gaps appearing between shelves, allowing cold air to bypass  
• Loose shelves that do not stay securely in place
• Bowed or sagging shelves unable to bear the weight of frozen items
• Noisy rattling or shaking coming from inside the freezer

Causes can include stress cracks from years of use, impact damage if heavy items are dropped inside, or bending from overfilled shelves.

Replacing with this genuine shelf support restores reliable organization and airflow within the freezer. It also fits Hotpoint, RCA, and select Kenmore chest freezer models.
 

Lower storage basket for chest and freestanding freezers. Slides into bottom rails to organize frozen items. Replace if cracked, broken, or missing.

Fix water pooling inside your freezer with this interior drain plug. Seals the drain opening to direct defrost water properly and prevent leaks. Easy DIY fix.

Door lock secures the appliance door during use, allowing cycles to start and run safely. Replace a broken or failing lock to restore proper closure and prevent interruption of operation. What it does:

• Latches and holds the door closed so the appliance can start and complete cycles.
• Triggers the control to allow operation only when the door is fully closed.
• Common symptom: appliance won't start or stops mid-cycle because the door won't latch.
• May be needed if the door feels loose, won't stay closed, or you hear clicking when trying to start.

• Disconnect power (and water, if applicable) before starting any repair.
• Handle parts carefully; avoid forcing or bending mounting tabs during installation.
• Verify proper alignment and engagement of the latch before restoring power.

This is a self-tapping ST3.5 x 9.5 screw used to secure panels, trim and small appliance components. It replaces missing or damaged screws to restore proper fit and prevent rattling or loose parts. What it does:

• Fastens control panels, brackets, trim pieces and light assemblies
• Replaces stripped, corroded or missing screws that allow parts to shift
• Restores secure mounting and helps eliminate vibration noise
• Small size for low-profile applications where a compact fastener is required

• Use the correct sized Phillips or Pozidriv driver to avoid cam-out
• Start screws straight and drive until snug; avoid overtightening to prevent stripping
• Disconnect power and remove any sharp panels before working to stay safe
• Keep a small parts tray to avoid losing tiny screws during repair

This cover door lock is the replacement plastic cover that protects and secures the appliance's door latch mechanism, helping the door close and stay latched reliably. It restores proper fit and reduces noise from a damaged latch area. What it does:

• Protects the door latch assembly from dirt, debris and accidental impact
• Helps the latch engage smoothly so the door closes and stays closed
• Replaces cracked, broken or loose covers that cause rattling or misalignment
• Supports normal door operation without altering latch function

• Disconnect power to the appliance before starting any repair
• Basic hand tools are typically required; follow manufacturer disassembly steps
• Handle plastic parts gently to avoid cracks during installation
• If the latch mechanism is damaged, replace the latch assembly as well

Exterior drain plug seals the freezer's drain opening. Replaces cracked, broken, or missing plugs to prevent leaks and maintain a watertight seal.

Control panel for chest freezers with temperature adjustment controls and indicator lights. Replace if buttons fail or display malfunctions. Verify fit with your freezer model number before ordering.

A replacement harness door cover that protects and secures the wire harness at the appliance door, preventing chafing and moisture exposure for reliable electrical connections. What it does:

• Covers and organizes the door wiring harness to reduce rubbing and wear
• Helps keep wiring routed away from moving parts and sharp edges
• Protects harness from dirt and moisture near the door area
• Can resolve intermittent door-related electrical issues caused by damaged wiring

• One harness door cover

• Disconnect power to the appliance before starting any repair
• Install requires access to the door wiring area; panel removal may be necessary
• Handle carefully to avoid damaging adjacent wiring or connectors

This replacement power cord clamp secures the appliance's main power cord where it passes through the cabinet, protecting wiring from abrasion and reducing strain on the cord connection for safer, more reliable power delivery. What it does:

• Anchors and locks the power cord at the cabinet entry to prevent tugging or accidental unplugging
• Prevents cord chafing and wear where the cord contacts sharp edges
• Helps avoid loose electrical connections that can cause intermittent power or arcing
• Keeps cord routing neat and maintains correct positioning for service access

• Disconnect power before starting any repair; appliance is de-energized
• Remove the rear access panel to reach the cord entry; replace the old clamp and secure per original hardware
• Position the cord so the clamp grips the jacket and does not pinch wires
• If screws or grommets are damaged, replace them—only reuse hardware confirmed intact

Power cord for chest freezers. Connects your freezer to the electrical outlet. Replace if damaged, frayed, cracked, or missing to restore power connection.

This sealed component removes moisture and contaminants from the R600 refrigerant system, typically located in the sealed system behind the refrigerator. Replace if the refrigerator isn't cooling properly, runs constantly, or if a technician identifies refrigerant system contamination.

Chest freezer not cooling or running constantly? The compressor circulates refrigerant to maintain temperature. Professional repair recommended due to complexity.

Chest freezer not cooling or not starting? This compressor electrical assembly connects power to the compressor. Moderate DIY repair in 1-2 hours.

Can't lock your freezer door or need child-safety access control? This door lock key engages the latch mechanism to secure the door and restrict access.

A short freezer divider that restores interior organization and keeps food separated on the freezer shelf. Replaces a cracked or missing divider to prevent items from shifting and improve usable storage space. What it does:

• Separates sections on a freezer shelf to keep items organized and upright
• Holds frozen food in place to reduce shifting and contact between items
• Replaces cracked, broken, or warped dividers that allow items to fall or slide
• Helps restore the original fit and appearance of the freezer interior

• One short freezer divider

• Remove food and shelves as needed to access the divider before installing
• Typically snaps or slides into place; align tabs and seat firmly until it clicks
• No tools required for most installs;
• Disconnect power only if required by your model or if working near electrical components

Long freezer divider that separates and organizes frozen items. Replace a cracked, broken, or missing divider to restore compartment organization.

A replacement badge nameplate that restores the exterior appearance of your appliance by covering the brand/name area. Keeps the unit looking finished and professional after repairs or panel replacement. What it does

• Replaces a missing, cracked or faded nameplate badge to restore the appliance's exterior appearance.
• Provides the visible brand/name emblem usually mounted on the control panel or door.
• Helps hide mounting holes or blemishes left from previous badge removal.
• Common symptom: visible missing or damaged emblem that affects the appliance's look.

• Inspect the old badge to determine if clips, screws or adhesive secure the replacement; transfer any reusable fasteners.
• Clean the mounting surface before installing to ensure good adhesion or clip engagement.
• Use appropriate hand tools; avoid forcing tabs or clips to prevent panel damage.

Fix cooling issues in your refrigerator with this process valve. Regulates refrigerant flow for proper temperature control. Red cap design for R600 systems.