Parts for Ge FCM16DLBWW: Freezer Parts

This white freezer door handle replaces a worn, cracked or missing grip so you can open the freezer easily and restore the door's appearance. Designed as a direct replacement using the original mounting points. What it does:

• Provides a secure grip for opening and closing the freezer door.
• Replaces cracked, broken, loose or missing handles that make the door hard to open.
• Restores the door's original look and fits the factory handle mounting locations.
• Helps ensure proper operation of the freezer door without modifying the cabinet.

• Disconnect power to the refrigerator before starting work to avoid electrical hazards.
• Remove the old handle hardware and fasteners; keep original screws if they are undamaged and reusable.
• Align the replacement handle to the factory mounting holes and install hardware snugly; avoid over-tightening to prevent cracking.

A single white cover screw used to secure trim or access covers on compatible appliances, keeping panels and controls fastened and visually finished. Small replacement that restores proper fit and appearance. What it does

• Secures a cover, trim piece, or access panel to the appliance
• Keeps wiring or internal components covered and protected from incidental contact
• Restores a flush, finished look to the control or trim area
• Helps eliminate rattles or loose-fitting panels caused by a missing or stripped screw

• One white cover screw

• Use the correct screwdriver and turn slowly to avoid stripping the head or threads
• Do not overtighten; tighten until snug and the cover sits flush
• Disconnect power before accessing internal panels or wiring
• Replace or repair the threaded insert before installing

This LED light cover is the translucent lens that protects and diffuses the refrigerator's LED lighting for even interior illumination. It restores protected, glare-free light and keeps the LED module secure from spills and debris. What it does:

• Covers and protects the LED light module from moisture, dust and accidental contact
• Diffuses and softens LED output for more even interior illumination
• Restores proper light distribution when the original cover is cracked, yellowed or missing
• Helps prevent direct glare from exposed LEDs

• One LED light cover (lens)

• Disconnect power to the appliance before beginning work to avoid shock
• Remove shelves or bins as needed for access; replacement typically snaps into the light housing
• Handle the lens carefully to avoid scratching; ensure it seats fully to lock in place

This top hinge cover protects and hides the refrigerator door hinge while restoring a finished look. It keeps hinge hardware clean and reduces exposure to sharp edges for safer daily use. What it does:

• Covers the top door hinge to conceal hardware and improve appearance
• Protects hinge components from dirt and debris
• Helps prevent accidental contact with hinge edges
• Replaces cracked, chipped, faded, or missing hinge trim

• One top hinge cover

• Support or brace the door before removing hinge hardware to prevent the door from shifting or falling
• Remove existing hinge trim by releasing retaining tabs or screws, then snap or fasten the new cover into place
• Inspect hinge and mounting hardware for wear while replacing trim; service or replace damaged hinge components as needed
• Follow manufacturer's service instructions and disconnect power only if directed for your appliance model

This freezer door hinge replaces a worn or damaged hinge to restore proper door alignment and smooth opening. It helps maintain a tight door seal for efficient cooling and prevents rubbing or sagging doors that can cause air leaks. What it does:

• Supports and pivots the freezer door for consistent opening and closing.
• Restores correct door alignment to improve gasket sealing and cold retention.
• Stops door sag, scraping, or uneven gaps that can lead to temperature issues.
• Works with factory mounting points to match original door movement.

• Installation requires basic hand tools; inspect mating hardware and holes for wear before installing.
• Keep the door supported or use a helper during removal/installation to avoid injury or damage.
• Tighten fasteners to OEM torque if available; do not overtighten plastic or painted surfaces.
• If hinge mounting points or door edges are damaged, replace or repair those components for a secure fit.

The Upper Freezer Basket is an OEM replacement part for GE refrigerators. It provides storage for frozen foods in the upper portion of the freezer compartment. Over time, the plastic basket can become cracked, warped or broken due to use and temperature changes. 

Symptoms of a failing upper freezer basket include:

• Improper fit
• Inability to hold items
• Cracks or breaks

Replacing the defective basket restores your freezer organization with this replacement part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This shelf support secures a refrigerator shelf or bin in place so it stays level and stable during everyday use. Replacing a worn support restores proper fit and prevents shelves from sagging, tilting, or falling.

• Holds the shelf/bin on its mounting point inside the fresh food or freezer section
• Helps keep contents level and reduces rattling or movement
• Common failure signs include a cracked or missing support, shelf tilting on one side, or a loose bin

• Unplug the refrigerator before beginning
• Remove the shelf or bin to access the support
• Release the old support from its mounting point and press the new support into place
• Ensure the shelf/bin seats fully and is level before loading

The Lower Freezer Basket is an OEM part for GE freezers. This lower freezer basket provides a convenient storage solution for frozen food items, allowing for easy access and organization. It ensures that your frozen goods are kept in a secure and organized manner, maximizing the storage space available.

A bad lower freezer basket can occur due to wear and tear, accidental damage, or other factors. If you notice symptoms such as cracks, breaks, or the basket not sliding smoothly, it may be time to replace the lower freezer basket.

Symptoms of a bad lower freezer basket include:

• Cracks or breaks
• Basket not sliding smoothly
• Insufficient storage capacity

Improve the organization of your GE freezer by replacing the faulty lower freezer basket with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This interior drain plug seals and directs defrost and condensation water into the refrigerator drain channel to help prevent leaks and pooling inside the cabinet. Replacement restores proper drainage and reduces standing water near drawers. What it does:

• Seals the refrigerator drain opening so defrost/condensation water flows into the drain channel
• Helps prevent water from pooling under crispers or on shelf surfaces
• Reduces risk of fouling odors by keeping drain flow unobstructed
• Works with the drain trough and drain tube to route moisture to the evaporator pan

• One interior drain plug

• Disconnect power to the appliance before accessing interior panels
• Remove shelves/drawers and the evaporator or back inner panel as required for access
• Clean the drain channel and remove any debris or ice before installing the new plug
• Inspect surrounding gaskets and seating surface; press the plug firmly into place without forcing

Door lock secures the appliance door during use, allowing cycles to start and run safely. Replace a broken or failing lock to restore proper closure and prevent interruption of operation. What it does:

• Latches and holds the door closed so the appliance can start and complete cycles.
• Triggers the control to allow operation only when the door is fully closed.
• Common symptom: appliance won't start or stops mid-cycle because the door won't latch.
• May be needed if the door feels loose, won't stay closed, or you hear clicking when trying to start.

• Disconnect power (and water, if applicable) before starting any repair.
• Handle parts carefully; avoid forcing or bending mounting tabs during installation.
• Verify proper alignment and engagement of the latch before restoring power.

This is a self-tapping ST3.5 x 9.5 screw used to secure panels, trim and small appliance components. It replaces missing or damaged screws to restore proper fit and prevent rattling or loose parts. What it does:

• Fastens control panels, brackets, trim pieces and light assemblies
• Replaces stripped, corroded or missing screws that allow parts to shift
• Restores secure mounting and helps eliminate vibration noise
• Small size for low-profile applications where a compact fastener is required

• Use the correct sized Phillips or Pozidriv driver to avoid cam-out
• Start screws straight and drive until snug; avoid overtightening to prevent stripping
• Disconnect power and remove any sharp panels before working to stay safe
• Keep a small parts tray to avoid losing tiny screws during repair

This cover door lock is the replacement plastic cover that protects and secures the appliance's door latch mechanism, helping the door close and stay latched reliably. It restores proper fit and reduces noise from a damaged latch area. What it does:

• Protects the door latch assembly from dirt, debris and accidental impact
• Helps the latch engage smoothly so the door closes and stays closed
• Replaces cracked, broken or loose covers that cause rattling or misalignment
• Supports normal door operation without altering latch function

• Disconnect power to the appliance before starting any repair
• Basic hand tools are typically required; follow manufacturer disassembly steps
• Handle plastic parts gently to avoid cracks during installation
• If the latch mechanism is damaged, replace the latch assembly as well

This exterior drain plug seals the washer's drain opening to prevent leaks and contain water in the tub during operation. It provides a simple replacement to restore a watertight seal at the appliance drain area. What it does:

• Seals the drain opening to help prevent water leaks from the tub or drain housing
• Helps maintain proper drainage by keeping debris out of the drain path
• Can stop visible water weeping or puddling near the base of the washer
• Replaces a cracked, worn or missing exterior drain plug to restore normal operation

• One exterior drain plug

• Disconnect power to the appliance and turn off water supply before starting any work
• Remove the appropriate access panel or lower kick plate to reach the drain opening
• Press or thread the plug into the drain opening as designed; snug by hand and avoid over-tightening
• Inspect the surrounding seal area and replace any damaged gaskets or housings if present; test for leaks after reinstalling panels and restoring power/water

The Control Panel is an OEM component specifically designed for GE chest freezers. It houses all the control functions for operating the freezer.  

The control panel allows for temperature adjustments and includes indicator lights to monitor freezer status. Proper operation depends on a functioning control panel.

Symptoms of a bad control panel include:

• Temperature that cannot be adjusted or monitored 
• Lights that do not illuminate properly 
• Non-responsive buttons and dials
• Displays that do not provide helpful information

Causes for failure can include damage from spilled liquids, cracks from impact, or worn wiring/electronics.

This genuine OEM GE replacement restores dependable control and monitoring of your chest freezer's performance. It is also compatible with Hotpoint, RCA, and some Kenmore models. Replace yours today to maintain convenience and ensure proper freezer operation.

A replacement harness door cover that protects and secures the wire harness at the appliance door, preventing chafing and moisture exposure for reliable electrical connections. What it does:

• Covers and organizes the door wiring harness to reduce rubbing and wear
• Helps keep wiring routed away from moving parts and sharp edges
• Protects harness from dirt and moisture near the door area
• Can resolve intermittent door-related electrical issues caused by damaged wiring

• One harness door cover

• Disconnect power to the appliance before starting any repair
• Install requires access to the door wiring area; panel removal may be necessary
• Handle carefully to avoid damaging adjacent wiring or connectors

This replacement power cord clamp secures the appliance's main power cord where it passes through the cabinet, protecting wiring from abrasion and reducing strain on the cord connection for safer, more reliable power delivery. What it does:

• Anchors and locks the power cord at the cabinet entry to prevent tugging or accidental unplugging
• Prevents cord chafing and wear where the cord contacts sharp edges
• Helps avoid loose electrical connections that can cause intermittent power or arcing
• Keeps cord routing neat and maintains correct positioning for service access

• Disconnect power before starting any repair; appliance is de-energized
• Remove the rear access panel to reach the cord entry; replace the old clamp and secure per original hardware
• Position the cord so the clamp grips the jacket and does not pinch wires
• If screws or grommets are damaged, replace them—only reuse hardware confirmed intact

The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.

You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.

Symptoms of a bad R134 drier include:

• Reduced cooling efficiency
• Frost buildup on the evaporator coils
• Unusual noises from the refrigeration system
• Increased energy consumption
• Refrigerator not maintaining the set temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

A small replacement locking key that secures the appliance door latch so the door stays closed and access is restricted. Fits into the door lock mechanism to restore normal latch engagement and basic child-safety function. What it does

• Inserts into the door lock to engage or disengage the door latch
• Helps keep the door closed and latched during normal use
• Restores the keyed locking function when the original key is lost or damaged
• Can help prevent unintended access to the compartment when used as designed

• One door key

• Install/replace by inserting the key into the lock slot; remove by reversing the process
• No special tools typically required; handle gently to avoid damaging the lock cylinder
• If the lock mechanism is damaged or the key does not operate smoothly, inspect the lock and replace the entire lock assembly if needed
• Disconnect power only if working in an area where electrical components are exposed; otherwise follow basic safety and manufacturer guidance

Badge assembly that restores the exterior nameplate on compatible refrigerators, returning factory appearance and clear appliance identification. Ideal for replacing faded, cracked or missing emblems for a like-new finish. What it does:

• Restores the appliance's exterior identification and cosmetic finish where the original emblem is faded, cracked, or missing.
• Covers the mounting area and provides the finished look customers expect from the door surface.
• Matches factory styling so the appliance maintains a consistent, OEM appearance.
• Useful whenever visible badge damage detracts from the refrigerator's appearance.

• High-level surface-mount part—inspect the door surface and remove any old adhesive or residue before installing.
• Alignment is important; position carefully and press firmly to engage any snap-in tabs or adhesive backing.
• No electrical disconnection is typically required for exterior cosmetic badges, but avoid prying behind panels that expose wiring or components.