Parts for Ge PFCS1NFXCSS: 03 - Freezer Shelves Parts

The GE refrigerator water filter is an OEM replacement part responsible for ensuring the quality of the water dispensed on GE Profile top and bottom freezer refrigerators. It is responsible for purifying the water before it reaches your glass or ice maker, providing you with clean and safe drinking water directly from your refrigerator. To maintain optimal water quality and ensure the filter's effectiveness, it is recommended to replace the filter every 6 months or when the rated capacity of 750 gallons is reached.

Over time, the water filter can become clogged with sediment, reducing its effectiveness. Regular use and the accumulation of minerals and contaminants can lead to the need for replacement.

Symptoms of a bad water filter include:

• Reduced water flow from the dispenser
• Ice cubes with an unusual taste or odor
• The filter indicator light staying on
• Visible particles in the water or ice

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. For the best performance, it is recommended to replace the water filter every six months or as indicated by the filter change light on your refrigerator.

8-18 CA HX 1/2 S

This silicon controlled rectifier (SCR) is an electronic switching device used to control power to oven/stove heating circuits, helping the appliance regulate temperature and heat output for cooking performance. What it does:

• Switches and regulates AC power to heating elements for controlled heat
• Enables cycle-based or phase-controlled heating used by oven/range controls
• Common replacement when an element won't heat consistently or unit won't maintain temperature
• Helps stop erratic heating caused by a failed power control component

• Disconnect power to the appliance before inspecting or replacing the SCR
• Observe ESD precautions and handle the component by insulated edges

This divider guide kit replaces the guide components that support and align an adjustable divider inside the refrigerator. It restores smooth movement and secure positioning so the divider stays put and your bin or basket stays organized.

• Guides the adjustable divider along its track and keeps it centered
• Helps the divider hold position to partition storage space
• Replaces cracked, warped, or missing guide pieces
• Common symptoms: divider falls out, won't stay in place, binds, or is difficult to adjust; visible broken plastic on the guide

• Unplug the refrigerator and remove the affected bin/basket and divider before beginning
• Note the orientation and fastener locations to aid reassembly
• Use the appropriate screwdriver or nut driver; avoid overtightening into plastic
• After installation, the divider slides and locks securely

This divider guide kit replaces the guide components that support and align an adjustable divider inside the refrigerator. It restores smooth movement and secure positioning so the divider stays put and your bin or basket stays organized.

• Guides the adjustable divider along its track and keeps it centered
• Helps the divider hold position to partition storage space
• Replaces cracked, warped, or missing guide pieces
• Common symptoms: divider falls out, won't stay in place, binds, or is difficult to adjust; visible broken plastic on the guide

• Unplug the refrigerator and remove the affected bin/basket and divider before beginning
• Note the orientation and fastener locations to aid reassembly
• Use the appropriate screwdriver or nut driver; avoid overtightening into plastic
• After installation, the divider slides and locks securely

This upper drawer slide assembly supports and guides a refrigerator bin beneath its shelf. Replacing a cracked or worn slide restores smooth, aligned drawer movement so the bin opens and closes easily without binding or sagging.

• Provides the track the drawer rides on under the shelf
• Keeps the drawer level and properly aligned for smooth operation
• Typical failure signs: hard-to-open/close drawer, scraping, falling off track, visible cracks
• Helps prevent drooping on one side and restores stable support

• Unplug the refrigerator before servicing.
• Remove the drawer and any contents; handle glass shelves carefully if removal is required.
• Retain and reuse original screws/fasteners or trim pieces.
• Ensure the new slide is fully seated and level before reinstalling the drawer.

This middle freezer basket replaces the center storage basket that holds frozen foods and helps keep items organized and accessible in the freezer compartment. Restores proper storage and prevents items from falling into lower sections. What it does:

• Provides a dedicated shelf-level basket for organizing frozen foods
• Secures loose items to improve airflow and prevent shifting during door use
• Replaces cracked, broken or missing middle freezer basket
• Helps reduce rummaging and keeps frequently used items within reach

• Designed for drop-in or slide-in placement; no special tools typically required
• Remove frozen items and ice buildup before installing to avoid damage
• Handle with care to avoid bending or breaking mounting tabs

This Shelf Chiller 21 is a replacement refrigerator chiller shelf that restores a flat, stable surface for storing chilled items and helps organize foods in the chiller compartment. It fits into the chiller area to replace cracked or missing shelves and improve storage usability. What it does:

• Replaces a damaged or missing chiller shelf to restore usable storage space
• Provides a flat, stable surface for deli items, produce, and containers
• Helps maintain organization and prevents items from falling into the chiller drawer
• Visible wear or cracks on the old shelf are common reasons to replace it

• One Shelf Chiller 21

• Unplug the refrigerator or turn off power at the breaker before starting
• Remove food and the chiller drawer to access the shelf area
• Handle carefully—if glass, support edges to avoid breakage and personal injury
• Reinstall drawer and shelf in the original orientation; restore power and check fit

This ice bucket cover is a replacement clear plastic lid that protects and helps contain ice inside the refrigerator ice bucket. It helps reduce spills and keeps ice cleaner between harvest and dispensing. What it does:

• Covers the ice bucket to keep ice contained and reduce spilling when the bucket is removed
• Helps shield ice from odors and light exposure for better taste retention
• Replaces cracked, warped, or missing covers that allow ice to spill or become exposed
• Works with the ice bucket to guide ice toward the dispenser or scoop area

• One ice bucket cover (clear plastic)

• High-level, snap-on style fit; align and press into place until it seats
• Remove ice and bucket before installation to avoid injury or mess
• Unplug the refrigerator or disable the ice dispenser per manufacturer's safety guidance before any service
• If cover does not seat easily, inspect for obstructions or damaged bucket parts and replace as needed

This right-side rail holder secures the refrigerator door/organizer rail to the liner, keeping shelves and bins stable for reliable storage. It replaces a cracked or broken holder to restore proper fit and alignment. What it does:

• Secures the rail/organizer to the cabinet liner so door bins and rails stay in place
• Prevents rail sagging, misalignment, or rails coming loose during use
• Restores proper rail fit when the original holder is cracked, broken or worn
• Works with the corresponding left-side holder to support the full rail assembly

• Disconnect power to the appliance before beginning work to avoid electrical hazards
• Remove door bins/rails or inner liners as needed to access the holder; handle glass or plastic shelves carefully
• Install with the correct orientation (right-side) and secure fasteners snugly without over-tightening
• If the mating rail or mounting area is damaged, inspect and repair those parts before reinstalling