Parts for Ge PSS23NSTCSS: 06 - Freezer Shelves Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

Size: 10-32 GXTT FLP.595 S

This silicon controlled rectifier (SCR) is a replacement control semiconductor that helps regulate power to heating elements and motors, restoring proper cycle control and heat delivery in compatible appliances. What it does:

• Controls and chops AC power to heating elements or motor circuits for variable heat/speed control
• Can stop intermittent or no-heat conditions caused by a failed SCR in oven, range, or similar appliances
• Helps restore stable thermostat/regulation behavior when the original SCR is not switching correctly
• Commonly used where precise power control is required in the appliance's control board or module

• One silicon controlled rectifier (SCR) as shown

• High-level, service-only replacement — disconnect power before starting work
• Verify correct part number on the appliance and transfer heat sinks or mounting hardware if required
• Use proper ESD precautions when handling semiconductor components

This replacement painted #8-18 screw secures panels and components on select appliances, restoring proper fit and reducing vibration. Use it when original fasteners are missing, stripped, or corroded to help keep parts aligned and stable. What it does:

• Fastens trim, panels, brackets, and small components in appliance assemblies
• Replaces stripped, rusted, or missing #8-18 fasteners that cause loose parts
• Helps eliminate rattles and misalignment from loose or damaged screws
• Matches the painted finish for a cleaner, OEM-like appearance

• Use the correct driver bit and avoid over-torquing to prevent stripping
• Inspect mating threads and replace if damaged before installing
• Disconnect power to the appliance if working near electrical components; follow all safety precautions

This fixed freezer shelf restores a secure, level surface for storing frozen foods. Replace a damaged, bent, or missing shelf to regain organization and the intended storage capacity of your freezer compartment. What it does:

• Provides a sturdy support surface for items in the freezer
• Locks into the factory mounts for stable placement
• Helps organize contents and maximize usable space
• Typical failure signs: cracked/bent shelf, finish damage, won't stay seated, or missing shelf

• 1 fixed freezer shelf

• Unplug the refrigerator and clear the area before installation
• Align the shelf with the liner slots and side supports; insert the rear edge first, then lower the front into place
• Ensure the shelf is fully seated and level before loading
• Wear cut-resistant gloves and handle carefully

This freezer shelf trim snaps onto the shelf edge to secure the liner/glass and provide a clean front lip in the freezer compartment. Replace a broken or missing trim to restore shelf stability and help keep items in place.

• Attaches to the shelf edge to finish the front and retain the shelf/glass panel
• Helps stabilize the shelf and prevent items from slipping forward
• Common failure signs: cracked, warped, or missing trim; loose shelf edge or shifting glass
• Restores original fit and appearance

• Unplug the refrigerator and remove items from the affected shelf
• Lift out the shelf assembly; handle any glass carefully
• Release the old trim from the tabs and snap the new trim onto the shelf edge evenly
• Allow cold plastic to warm to room temperature to reduce the chance of cracking

This is a replacement refrigerator door handle that restores a secure grip and proper door operation after damage or wear. It brings back smooth opening and a finished look to the appliance. What it does:

• Replaces a cracked, broken, loose, or missing refrigerator door handle
• Provides a solid grip for opening and closing the door
• Helps the door latch and seal operate properly by restoring normal handling
• Matches OEM fit and mounting points to align with existing hardware

• One replacement refrigerator door handle

• Remove power to the appliance or unplug before starting any repairs
• Use basic hand tools; handle typically installs with screws or clips accessible from inside the door
• Keep original fasteners; replace any damaged clips or screws as needed

A right-hand slide basket that restores smooth support and guided movement for a refrigerator drawer. Replaces a damaged or worn slide assembly so the basket stays aligned and operates without binding. What it does

• Provides the right-side sliding support for a refrigerator shelf/drawer, keeping the drawer aligned as it opens and closes
• Replaces broken, bent, or worn slide hardware that causes scraping, binding, or a drawer that falls out of track
• Helps restore smooth travel and load-bearing for everyday use
• Fits into factory mounting points and works with the factory left/right counterpart when both are present

• One right-hand slide basket assembly

• Disconnect power to the appliance or unplug the refrigerator before starting service to avoid electrical hazard
• Empty the drawer and remove adjacent shelves or trim to access mounting points as needed
• Use basic hand tools; support the drawer while removing and installing the slide to prevent drops or damage

This left-hand slide basket provides the sliding support for a refrigerator drawer, restoring smooth opening and secure support so stored items stay accessible and organized. Fits where the left-side sliding bracket has failed or broken. What it does

• Replaces the left-side sliding support that holds and guides a refrigerator drawer or basket.
• Restores smooth, stable sliding action and prevents sagging or binding.
• Helps resolve symptoms like a drawer that won't slide, one-side droop, or a loose/misaligned basket.

• Disconnect power or unplug the appliance before servicing to reduce shock risk.
• Remove drawer/basket per manufacturer instructions to access and replace the slide; handle glass or plastic parts carefully.
• Use basic hand tools; snap or screw fasteners may be used depending on model.