Parts for Ge GSS23HGHBCBB: Freezer Shelves Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

Size: 10-32 GXTT FLP.595 S

This support slide holds and guides a refrigerator or freezer basket so it opens and closes smoothly, preventing sagging and keeping stored items accessible. It restores proper basket movement and alignment for safer, more reliable use. What it does

• Replaces a worn or broken slide that supports the basket and allows it to glide.
• Restores smooth in-and-out motion so the basket doesn't stick or bind.
• Prevents the basket from tipping or sagging when loaded.
• Helps reduce noise and uneven movement caused by damaged slides.

• Disconnect power to the appliance before starting any repair.
• Remove the basket or drawer to access the slide assembly; reinstall the slide in the same orientation.
• Align the slide with the mounting points and secure until it snaps/locks into place; verify smooth operation before returning items to the basket.
• Replace it with the correct OEM fasteners only.

This support slide secures and guides a refrigerator freezer basket so it opens and closes smoothly and stays aligned. It replaces worn or broken slides to restore proper basket support and movement. What it does:

• Guides the basket along its track for smooth in-and-out motion
• Helps keep the basket level and prevents it from sagging or tilting
• Replaces damaged or worn slide hardware that can cause sticking or uneven travel
• Addresses symptoms like a basket that won't slide smoothly, drops, or misaligns

• One support slide

• Turn off power to the appliance and remove stored items from the basket before starting
• Compare the old slide to the new one to confirm orientation and mounting points
• Install by aligning the slide with the mounting points and securing per OEM fastener locations

This fixed freezer shelf restores a secure, level surface for storing frozen foods. Replace a damaged, bent, or missing shelf to regain organization and the intended storage capacity of your freezer compartment. What it does:

• Provides a sturdy support surface for items in the freezer
• Locks into the factory mounts for stable placement
• Helps organize contents and maximize usable space
• Typical failure signs: cracked/bent shelf, finish damage, won't stay seated, or missing shelf

• 1 fixed freezer shelf

• Unplug the refrigerator and clear the area before installation
• Align the shelf with the liner slots and side supports; insert the rear edge first, then lower the front into place
• Ensure the shelf is fully seated and level before loading
• Wear cut-resistant gloves and handle carefully

This freezer shelf trim snaps onto the shelf edge to secure the liner/glass and provide a clean front lip in the freezer compartment. Replace a broken or missing trim to restore shelf stability and help keep items in place.

• Attaches to the shelf edge to finish the front and retain the shelf/glass panel
• Helps stabilize the shelf and prevent items from slipping forward
• Common failure signs: cracked, warped, or missing trim; loose shelf edge or shifting glass
• Restores original fit and appearance

• Unplug the refrigerator and remove items from the affected shelf
• Lift out the shelf assembly; handle any glass carefully
• Release the old trim from the tabs and snap the new trim onto the shelf edge evenly
• Allow cold plastic to warm to room temperature to reduce the chance of cracking

This replacement freezer shelf glass provides a sturdy, easy-to-clean surface for organizing frozen foods and restoring lost storage space after a cracked or missing shelf. Tempered glass resists everyday wear and supports freezer bins and packages. What it does:

• Replaces a cracked, chipped or missing freezer shelf to restore usable storage area
• Provides a level surface so items sit securely and shelves above stack properly
• Keeps cold air circulation clear by fitting the designed shelf position
• Improves organization and prevents frozen items from falling through gaps

• Remove food and any items on adjacent shelves before starting; support the shelf while removing fasteners or clips
• Wear gloves and handle tempered glass edges carefully to avoid cuts
• No electrical disconnect is typically required, but follow your appliance manual for model-specific safety steps
• If shelf uses clips or brackets, confirm orientation and engagement before loading

This is a replacement refrigerator door handle that restores a secure grip and proper door operation after damage or wear. It brings back smooth opening and a finished look to the appliance. What it does:

• Replaces a cracked, broken, loose, or missing refrigerator door handle
• Provides a solid grip for opening and closing the door
• Helps the door latch and seal operate properly by restoring normal handling
• Matches OEM fit and mounting points to align with existing hardware

• One replacement refrigerator door handle

• Remove power to the appliance or unplug before starting any repairs
• Use basic hand tools; handle typically installs with screws or clips accessible from inside the door
• Keep original fasteners; replace any damaged clips or screws as needed

This is the slide-out wire basket used in the freezer compartment. Replace a bent, broken, or missing basket to restore organized storage and smooth access to frozen items.

• Provides organized storage and slides for easy access to freezer contents
• Restores proper fit when the original basket is bent, broken, or missing
• Helps prevent jamming or misalignment when opening/closing the freezer
• Common symptoms: basket won't slide smoothly, won't stay on rails, deformed or damaged wires

• Remove the existing basket by lifting the front slightly and sliding it out of the rails
• Align the new basket with the side rails and push straight in until fully seated
• Handle edges carefully; gloves recommended
• Do not overload; distribute weight evenly for smooth operation