Parts for Ge CWE23SSHCSS: Fresh Food Door - Rh Parts

Filter Material: Carbon Block. Micron Rating: 0.5. Flow Rate: 0.5 gpm. Operating Pressure: 120 psi. Approximate dimensions: 10" x 1-3/4"

The GE Refrigerator Water Filter RPWFE is an OEM part for GE refrigerators. This advanced water filter is crucial for removing contaminants and impurities from your refrigerator's water supply, ensuring you have access to clean, fresh-tasting drinking water and ice. Utilizing a state-of-the-art filtration process, the RPWFE filter is capable of reducing various contaminants, including lead, chlorine, and five pharmaceuticals, providing peace of mind about the quality of your water.

Over time, water filters can become clogged with particles and contaminants, leading to a decrease in water flow and a reduction in the effectiveness of filtration. It's important to replace your refrigerator water filter as recommended by the manufacturer, typically every six months, to ensure optimal performance and maintain the quality of your water.

Symptoms of a filter needing replacement include:

• Reduced water flow from the dispenser.
• Unpleasant taste or odor in the water or ice. 
• The refrigerator's water filter indicator light turns on

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

A stainless-steel handle fastener that secures the refrigerator door handle to the door assembly for a solid, wobble-free grip. Use to restore a loose, stripped, or missing handle attachment point. What it does:

• Secures the door handle to the door/handle mounting point so the handle stays tight and aligned.
• Stops handle movement, wobbling, or rattling caused by a worn or missing fastener.
• Replaces a corroded or damaged fastener to restore a secure connection.
• Stainless finish resists corrosion at the handle mounting point.

• Disconnect power to the appliance before starting work whenever access to internal parts is required.
• Use the correct screwdriver or bit; turn carefully and avoid sideways force on the handle.
• Do not overtighten—over-torquing can strip threads or crack surrounding trim.
• Keep removed hardware and any trim pieces for reassembly; inspect handle and threaded inserts for damage.

A .250-inch diameter set screw used to secure shafts or components in place, preventing unwanted movement and maintaining proper alignment. Small, durable fastener for appliance assemblies where a countersunk or threaded retention point is required. What it does

• Secures collars, pulleys, knobs, or shafts to prevent slipping or rotation
• Restores proper engagement when a loose or missing set screw causes wobble or misalignment
• Helps eliminate intermittent operation caused by shifted mechanical parts
• Works where a compact, recessed fastening point is needed

• Disconnect power and remove access panels before servicing
• Start threads by hand to avoid cross-threading; tighten with the correct hex/driver
• Do not overtighten—use firm, controlled torque to avoid damaging threads or mating parts
• Replace only with the same size and thread type specified by the OEM

The Set Screw is an OEM part for GE refrigerators. It is used to secure various components within the refrigerator, ensuring they remain firmly in place during operation. 

Over time, a set screw can become worn, stripped, or lost due to regular use or during repairs. A missing or damaged set screw can lead to loose components, which may cause operational issues or even damage other parts of the refrigerator.

Symptoms of a bad Set Screw include:

• Loose or rattling components inside the refrigerator
• Difficulty in keeping parts securely fastened
• Noise coming from the area where the screw is used
• Misalignment of parts, leading to improper functioning

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

8-18 hi/lo 5/8

This is a right hand door for refrigerators. It is used to offer user access to fresh foods inside the refrigerator. It has a solid construction and connects with a handle on the outside and various shelves and bins on the inside. Over time and use, the right hand door can become damaged and will need to be replaced.When replacing the fresh food right hand door, the inside of the refrigerator door will need to have its contents removed. In addition, make sure the refrigerator is unplugged from the wall for safety. A socket wrench and screwdriver will be needed to replace the door. Remove the kick plate and bottom hinge before removing the door. Find the door hinge on top of the refrigerator and remove it so the door can be taken off. Lift the door and put it out of the way before installing the new component. The fresh food right hand door is created for use with General Electric refrigerators. It is an authentic OEM replacement part that is sold as an individual item. The part is sourced directly from the manufacturer.

The Fresh Food Door Gasket is an OEM part for GE refrigerators, specifically designed to ensure an airtight seal around the door of the refrigerator's fresh food compartment. This gasket plays a crucial role in maintaining the refrigerator's internal temperature, preventing warm air from entering and cold air from escaping. By doing so, it helps to keep food fresh for longer periods, reduces energy consumption, and ensures the appliance operates efficiently.

The cause of issues with the door gasket can be normal wear and tear over time. Frequent opening and closing of the refrigerator door, along with accidental spills or debris, can also degrade the gasket's material, reducing its effectiveness.

Symptoms of a failing Fresh Food Door Gasket include:

• Noticeable gaps or tears in the gasket
• Condensation or frost buildup inside the refrigerator
• The refrigerator door not closing as tightly as it should
• An increase in the energy required to maintain the refrigerator's temperature

This OEM GE  part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is a replacement round-head screw sized 10-24 x 5/8 in. It secures trim, panels, and internal components so parts stay aligned and appliances run quietly and safely. What it does

• Fastens panels, brackets, and trim pieces in place
• Prevents loose parts that can rattle or cause misalignment
• Replaces missing or stripped screws to restore secure mounting
• Works where a 10-24 x 5/8 round-head screw is required

• Disconnect power before servicing the appliance
• Use the proper screwdriver or nut driver to avoid stripping the head
• Align parts before tightening and thread gently to avoid cross-threading
• Do not over-tighten; stop when snug to prevent panel distortion

This hinge-mounted refrigerator door stop limits how far the door swings open, protecting the cabinet and nearby walls from impact. Replace a cracked or missing stop to restore a controlled, factory door swing and prevent overextension.

• Mounts on the door hinge to control the door's opening range
• Helps prevent the door or handle from striking adjacent walls or cabinets
• Common symptoms: door opens past its normal range, broken/missing stop, visible wear at the hinge stop
• Often needed after an impact or when the original stop cracks from fatigue

• Disconnect power; turn off water to the door if applicable
• Support the door before loosening hinge fasteners; door removal may be required on some models
• Install the stop on the correct hinge location (right or left as required) and tighten hardware securely
• Verify door swing and clearance before fully loading shelves

Restore your appliance's factory look with this badge assembly. It replaces a missing, cracked, or faded logo on the refrigerator exterior, delivering a clean, professional appearance without affecting performance or operation.

• Decorative nameplate/logo for the refrigerator exterior
• Replaces cracked, faded, loose, or missing badge
• Restores a clean, factory appearance
• Cosmetic component; does not impact cooling or function

• Disconnect power before servicing the appliance
• Protect the finish; use a plastic trim tool to remove the old emblem if needed
• Clean and dry the mounting area; align with locating marks/holes and secure per your model diagram

Gallon bin divider for the refrigerator door that keeps gallon jugs and tall containers upright and organized. Durable replacement restores proper separation in the door bin so items stay secure and reduce shifting. What it does:

• Separates the door's gallon bin to keep bottles and tall containers upright and prevent tipping.
• Reduces sliding and shifting when the door opens or closes.
• Replaces cracked, broken, or missing dividers that allow containers to tilt or fall.
• Fits into the existing door bin track to restore original bin organization.

• Remove items from the door bin before installing; some bins may need to be lifted out for access.
• Snap or slide the divider into the bin's existing slot or track—no special tools typically required.
• Inspect the bin and track for cracks or damage; damaged bins may prevent a secure fit.

The Gallon Door Bin is an OEM part for GE refrigerators. It is designed to attach to the inside of the refrigerator door, providing convenient storage space for gallon-sized containers, such as milk jugs, juice containers, and other large beverages.  

A functioning gallon door bin is key to organizing and efficiently using your refrigerator space. Over time, door bins can suffer from wear and tear or become damaged due to overloading or accidental impact.

Symptoms of a bad Gallon Door Bin include:

• Cracks or breaks in the bin itself
• Difficulty attaching the bin to the door or it not staying in place
• The bin sagging or failing to hold items securely

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dairy Door bin is an OEM replacement part for Frigidaire refrigerators. It is specifically designed to provide a designated storage space for dairy products like butter, cheese, and yogurt. This bin is attached to the refrigerator door and is covered to maintain the optimal temperature and humidity levels to keep dairy products fresh.

Common causes of a bad dairy door bin include regular wear and tear, accidental drops, or impacts during loading and unloading.

Symptoms of a bad dairy tray door include:

• Cracks or breaks in the plastic tray surface
• Difficulty keeping items on the tray due to a poorly fitting door
• Inability to easily access or remove items from the tray

This genuine Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement door bin fits the right-hand fresh food door and restores organized storage for condiments, jars, and small bottles. It helps maximize usable space and keeps frequently used items easy to see and reach.

• Holds condiments, small bottles, and jars on the right fresh food door
• Replaces a cracked, broken, or missing door bin
• Snaps into the molded slots on the door liner for secure storage
• Common symptoms: cracked plastic, broken tabs, won't stay seated, items tipping

• Disconnect power before servicing
• Empty and lift the old bin up and out of the door liner slots
• Align the new bin with the slots and press down until fully seated
• Confirm a secure fit before loading items

The Dairy Door bin is an OEM replacement part for Frigidaire refrigerators. It is specifically designed to provide a designated storage space for dairy products like butter, cheese, and yogurt. This bin is attached to the refrigerator door and is covered to maintain the optimal temperature and humidity levels to keep dairy products fresh.

Common causes of a bad dairy door bin include regular wear and tear, accidental drops, or impacts during loading and unloading.

Symptoms of a bad dairy tray door include:

• Cracks or breaks in the plastic tray surface
• Difficulty keeping items on the tray due to a poorly fitting door
• Inability to easily access or remove items from the tray

This genuine Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.