Parts for Craftsman 31AE558G099 / 2000: Friction Wheel Assembly Parts

A friction wheel assembly is a standard drive system found in a wide assortment of machines, including self-propelled snowblowers, chippers, and other lawn equipment. The device operates with two drive discs that are intersect at a right angle. The discs rotate and turn the axle, pushing the machine forward. With time and use, the friction wheels can wear out or become damaged. If either of these situations occurs, a replacement part and repair are required. Signs that the friction wheel assembly needs to be replaced include erratic, slow, or no movement from the snowblower or other machine. Wear protective gear during the replacement process. Make sure to disconnect the spark plug wire before removing the cover on the frame. Take the wheels off and remove the axle or shaft to access the friction disc. Clean everything up before replacing the friction wheel with a new part. Reassemble the machine.The friction wheel assembly is an authentic OEM part. It is sold individually. The friction wheel assembly is compatible with MTD, Ryobi, Yard Machines, Bolens, Yard-Man, Troy-Bilt, Cub Cadet, and Husky brands. It can be installed in a variety of machines, including chippers, shredders, and snowblowers. It is manufactured from high-quality, rugged metal.

This hex washer screw is a genuine OEM replacement part for a variety of household and outdoor appliances. A hex washer screw is a self-piercing screw with an attached washer at the head of the screw. Self-piercing screws are quite sharp and feature a twin-lead thread to screw into a surface more effectively. The built-in hexagonal washer helps to balance weight and force throughout the connection and prevent breakage. Hex washer screws can become damaged over time through repeated stress or tension. Their threading can become stripped or the head can eventually snap off. Replacing a hex washer screw is simple as long as you have the right tool. The unique shape of the screw head makes it incompatible with a flathead or Phillips head screwdriver. Instead, replacing this type of screw requires a unique hex head screwdriver. This part is compatible with Yard Machines, MTD, Yard Man, Troy-Bilt, and Craftsman products and will fit lawn mowers, tractors, snowblowers, vacuums, and chippers. This is a high-quality replacement part sourced from the original manufacture and ships independently of any other hardware.

A friction wheel assembly is a standard drive system found in a wide assortment of machines, including self-propelled snowblowers, chippers, and other lawn equipment. The device operates with two drive discs that are intersect at a right angle. The discs rotate and turn the axle, pushing the machine forward. With time and use, the friction wheels can wear out or become damaged. If either of these situations occurs, a replacement part and repair are required. Signs that the friction wheel assembly needs to be replaced include erratic, slow, or no movement from the snowblower or other machine. Wear protective gear during the replacement process. Make sure to disconnect the spark plug wire before removing the cover on the frame. Take the wheels off and remove the axle or shaft to access the friction disc. Clean everything up before replacing the friction wheel with a new part. Reassemble the machine.The friction wheel assembly is an authentic OEM part. It is sold individually. The friction wheel assembly is compatible with MTD, Ryobi, Yard Machines, Bolens, Yard-Man, Troy-Bilt, Cub Cadet, and Husky brands. It can be installed in a variety of machines, including chippers, shredders, and snowblowers. It is manufactured from high-quality, rugged metal.

The friction wheel for a snowblower is sometimes also known as a friction disc or a friction ring. The friction wheel is what helps to move the snowblower forward. When the disc is in contact with the spinning drive wheel, the disc will rotate and turn the axle to propel the snowblower. Over time, the friction wheel can start to wear down or even break. If this happens, it will mean that the snowblower will move slowly, or that it might have erratic movements. Owners who find that they are having similar problems with their machine will want to check the friction wheel to see if it is damaged or broken. They will need to replace the disc before they can use the machine efficiently and safely. The genuine OEM replacement friction wheel is for use with snowblowers, and it is sold individually. Compatible brands include Cub Cadet, Craftsman, Troy-Bilt, Yard-Man, Montgomery Wards, Bolens, Huskee, MTD, Yard Machines, and Ryobi.

This friction disc wheel is a genuine MTD part, sold individually. This friction disc wheel can be used as a replacement part for a snowblower or a chipper shredder. The purpose of a friction disc wheel is to propel the appliance forward when in operation.If the friction disc is damaged, it should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This friction disc wheel is compatible with the following outdoor appliance brands: MTD, Yard Man, Yard Machines, Ryobi, Craftsman, Cub Cadet, Huskee, Montgomery Wards, Troy-Bilt, Bolens, and MasterCut.