Frigidaire 318022002 Oven Relay Control Board OEM Part

Before we replaced the board, my wife tried to replace just the element. We had one we had ordered several years ago when this same thing happened. When that didn't work we replaced the board and could see where the old board was damaged so we figured this was the solution. It would have been except the bottom element my wife used to replace the old element (which was fine but had been thrown out figuring the new one was new so why keep the old one) was 1" shorter in the back than the old one. Unbeknownst to us, that one inch was very important as, some of the insulation had moved around and exposed metal that the back of the element was pushing up against. So as soon as we turned it one it was metal on metal and it burned the connectors right off. After a couple connectors blew off and we put our fingers back there and could feel the metal, we figured out what was going on and we were able to find a work around so there was no more metal on metal and the oven works great! So we had two issues, the original was the board was out and then our own made problem of to short of ends on the element.

I called appliance parts pros, provided the symptoms of he oven and repairs previously made. The technician recommended testing the temperature probe prions to buying a new item. I tested the probe which tested good. The technician told me the problem was the upper oven control board and provided the part number. I ordered the part, installed the part and tested the oven. I do not know the last time the upper oven worked this well. Thanks!

Andrew helped me trouble shoot the problem. First I replaced the elments but that did not fix the problem. When I spoke with Andrew he told me how to test the OHMS on the new and old element and they were both readying 26 OHMS. I then replaced the control panel for the clock and oven controls. This did not fix the problem. The next step was to replace the relay boards. We placed numbers on the wires (~30) to avoid confusion. Taking notes also helped. Replacing both relay swithces took less than an hour and the oven is working properly. AppliancePartsPros have been great to work with.

Broiler on upper oven stopped working. A few months later the bake element quit working too. Replaced relay board and it fixed the problem. Replacing the board was easy. Repair took about 20 minutes. Hardest part was getting the oven in and out of the cabinet. The relay board is on top of the oven underneath a metal panel. The oven had to be completely removed from the cabinet and sat on the floor to access the relay board.

Working with the staff at Parts pros - especially Joe Martin - who helped me diagnose the problem and I ordered both an upper and a lower oven control board and everything works like new! Thanks a bunch for your help!!