Levi G Wytheville , VA March 06, 2017 Appliance: Frigidaire Washer ATF7000ES0 Wouldn't spin at first then no activity at all e23 code We had a power surge that tripped the washer breaker. It showed an E23 error code so I replaced the main control board (part number AP4362398.) All washer activity back to normal except it still wouldn't spin and still had E23 code. I removed the tub to pump hose (part number AP3837322) to find all sorts of goodies inside such as underwires from bras, a quarter, nickel, penny, and dime stacked perfectly on top of each other inside the filter, and tangled yarn from a rug. Ended up replacing the tub to pump hose since the underwire from the bras punctured the hose in several places. Washed several loads and so far so good. Read More... 24 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Adjustable Wrench, Screwdrivers
James S Winchester , TN June 04, 2018 Appliance: Frigidaire Washer ATF7000EG0 Loud unusual 60 cycle hum from the area of the drain pump; poor draining action Replace drain pump and the tub-to-pump hose (with filter) Read More... 9 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Pliers, Screwdrivers, Socket Set
Steven P Hudson , FL February 25, 2017 Tub to pump hose had a hole in it. Order part, replace parts. Read More... 5 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Pliers, Screwdrivers
Lee W Washington , DC June 05, 2023 Appliance: Frigidaire Washer FAFW3801LW3 E23 error code. Washer wouldn’t start. Replaced Drain Pump, drain hose & filter. Now it works great! Previously I replaced the door catch sensor because some people said this was a common issue for not starting but that didn’t help, then I realized I could check for error codes. The hardest part of the project was getting the hose clips on and off. There was a lot of water in the hoses luckily I had two old towels ready. Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 2+ hours Tools: Adjustable Wrench, Pliers, Screwdrivers, Socket Set
John M Redding , CA October 12, 2020 Appliance: Model FRIGIDAIRE No high speed spin front loader. I pulled the bottom access plate off, ordered a drain boot and filter prior to starting the repair. Pulled off the drain boot, there was no filter basket installed.. The pump turned freely, so I installed the 2 new parts, ran on medium spin and the washer ran fine. Issue is with high speed spin.. but the 1 day shipping and video help me work on my own unit. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Pliers, Screwdrivers