Frigidaire 134418700 Agitator Hub OEM Part

The agitator stopped functioning and there was a squeaking sound occurring in agitation mode. I found that if I cranked down on the agitator cap, screwing in as hard as I could, the agitator would work briefly, then the cap would loosen and agitator stop moving. I removed the agitator cap, along with which came the agitator stud cap and a rubber washer/seal which was jammed up into the underside of the cap. I lifted out the agitator from the drum and inspected it and the hub best I could. Everything looked okay. I looked up the parts involved on AppliancePartsPro and concluded I would replace the cap, stud, hub and the washer/seal (the last of which APP didn't have so I sourced from another parts supplier). The parts were shipped to me quickly. Using a stout screwdriver and hammer I tapped the old hub out from the agitator. It came out fairly easily and fell out in several pieces. Apparently it had cracked long ago and was just held in the agitator as one piece from friction. The transmission drive spindle that fits inside the hub has a beveled edge on two sides. The beveled edges are designed to lock into corresponding bevels inside the hub. The old hub bevels were completely worn away, thus allowing the spindle to spin inside the hub, and squeak, but not engage. With the agitator out I took the opportunity to remove lint from the screening at the bottom of the tub around the transmission housing and I cleaned up some corrosion around the top of the spindle drive shaft. I placed the hub onto the top of the drive shaft aligning the beveled edges, slid the agitator back on being sure to properly align the fluted ridges in the agitator to align with the flutes in the hub. The hub package came with a flat washer, which wasn't part of what I removed or in the APP diagrams. I placed this washer in the top hole of the agitator, into which it fit nicely, which then rests on the top of the hub. Inserted the cap stud long side screwing down into the spindle top and tightened just snug with a wrench. Placed the rubber washer/seal over the top of the stud to rest on the top of the agitator with the flat sdie down and rounded side up. Screwed on the new cap and I was done. This resolved the problem and the washer is now operational again. All told this was about a $100 fix on a 7 year old stack-able washer/dryer which may well run another 7 years.

Replaced transmission. If you have a laundry center like me, you don't have alot of space. Replacing the parts want difficult. Just limited space made it harder. Also couldn't find a removal video for one of these but using a video for a frigidaire stand alone washer ouput me in the ball park and figured it out from there. Appliance parts pros had the best process too!

I own several apartments with same washer/dryer combo. A couple months ago, one of my washers stopped agitating. I hired an Appliance Repair Company. They charged my $95 for agitator, $65 for hub and $120 for service call, plus tax for a total of $310. Oh, and it took them FOUR WEEKS to get the part in and fix my washer!. Something to do with "Frigidaire shipping issues". Last week I had another unit break with same problem. Ordered parts from AppliancePartsPros.com for $80, parts arrived in 2 or 3 days and I fixed the washer in literally less than 10 minutes! Thanks AppliancePartsPros.com!!!

Look for the Model and Brand. Ola. all the parts needed are displayed. Googled the parts supplier and again displays so many suppliers, but I choose the appliancepartspros as it offers the cheapest and proven by me to deliver it fast. Now the washing machine is running perfectly. Thanks Appliance parts pro.

I ordered the parts for my 20 year old washing machine. They arrived in a rural area in 2 days. Very impressive. My husband fixed the agitator hub and put the new agitator on and now I don't have to buy a new one. Yeah. They provide a specific video to the repair which we did watch and I could have done the repair except for the elbow grease that was needed to pry off the old hub. They made is so easy and best of all QUICK DELIVERY. Maybe we don't every need an appliance guy!!!!!!!!