William J Chandler , AZ April 10, 2019 Oven would not preheat above 250 degrees only convection coil was heating and bake and broil coils were not, no error codes were displayed Thermostat was fine. Bake and broil element ohmed out fine. Checked elements by plugging them into convection element plugs, both heated up. Researched issue and similar ones were resolved with the control board but was usually accompanied by an error code. I had no error codes. Took a gamble and it paid off. Part arrived in less then 48 hours, stove was working within 10 minutes of part showing up. The overlay is a must, makes the repair much faster. Read More... 5 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers, Screwdrivers
Joshua R Richmond , VA March 02, 2019 Appliance: Frigidaire Electric Range FGIF3061NFC Random beeping no error code displayed Checking the internet I found 2 possible errors. First I replaced the heat sensor in the oven. That did not solve the problem. The other, more expensive, option was to replace the control unit. It was not a very difficult fix, just a bit time consuming. Also, I bought a new sticker to go on the front, because the control unit itself does not come with it... and trying to peel the old one off was a disaster. Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Pliers, Screwdrivers, Socket Set
Richard P Marlborough , MA March 31, 2020 Displayed error code which led to control board replacement Replacing the board was straightforward. Removed the back panel, unplugged the 7 leads connected to the board, removed the 4 screws holding the board to the frame and installed the new board. The most challenging part was ensuring the new keypad overlay was positioned correctly on the board before installing it. Best part was AppliancePartsPros delivery. I ordered the parts late Thursday night and the parts were delivered to my door before noon on Saturday. I had the range back up and running by early Saturday afternoon. Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Screwdrivers
Gil J Resaca , GA February 16, 2020 Appliance: Electrolux Range/Oven, Induction, Freestanding FGIF3061NFD Oven control board Replaced board and added filter, all went easy. Saved a service call and it works great. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
William B Loveland , CO December 05, 2019 Appliance: Frigidaire Electric Range FGIF3061NFC The top and bottom heating elements in my oven were not working I tested the elements with a multimeter. They seemed to be giving back acceptable resistance values. I then tested the voltage going through the elements and found it to be zero. APP was able to confirm that it must be the control board. It felt a little bit like a gamble, as they will not take returns on installed electronic items such as this, but it paid off. This range is between $1500-2000 new. Read More... Do-It-Yourself Rating: Repair Time Estimate: 2+ hours Tools: Nut Drivers, Pliers, Screwdrivers