Jim H Pine , CO February 12, 2024 Door wouldn't open all the way. Removed door and replaced bottom bearing. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Socket Set
Lee B Bay Springs , MS July 29, 2025 Broken hinge ramp on upright freezer Replace part Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Pliers, Screwdrivers, Socket Set
Luke T Mesa , AZ July 26, 2020 Broken hinge bearing. Removed the door and replaced the plastic bearing components. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Screwdrivers
Johnny H Huntsville , AL November 08, 2023 Appliance: Electrolux Freezer FFFH21F6QWB Upright freezer door would only partially open I replaced the lower hinge bearing (a plastic part). The existing part had split, causing it to bind as the door was opened. The repair was pretty easy. I chose some blocks of wood of the same height as the bottom of the door, so when I removed the upper hinge, the door could rest on the wood blocks while I replaced the part. AppliancePartsPros.com makes finding the right replacement part so easy. I had ordered the part I needed prior to the repair, so I had the new part on hand at the time of repair. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Socket Set
Timothy A E Greeley , CO March 26, 2022 Appliance: Kenmore Freezer 25370722410 Both the hinge bearing and ramp were damaged. Both the Hinge Bearing and Ramp were damaged. The door would still open and close, but it was not smooth and if you needed to open the fridge door full open, you needed to push past the damaged parts. Emptied the door. Removed the top door hinge by removing the plastic cover and two screw bolts with a ratchet socket. Lifted door off of the metal pin. The screw's head that held the ramp in place was damaged. Cut away the old ramp and was able to get a vice grip on the screw head and back it out. Replaced Hinge Bearing and screwed down new Ramp. Cleaned lube grease off of metal Pin, put new grease on Pin, Lifted door back onto Pin. Bolted down the top door hinge and replaced the plastic cover.j The door is now opening and closing nice and smooth. Helped to have a buddy steady the door while I replaced the top door hinge bolts. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers, Socket Set