Linda K Kandiyohi , MN December 20, 2018 Door of freezer opened half way. Ordered parts and now works perfectly. Read More... 14 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Wrench Set
Kevin P Auburn , IN June 27, 2020 The door on freezer would not open all the way. I took the door off and replaced the plastic ramp and hinge bearing. Read More... 5 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Socket Set
Billy M Norman Park , GA April 13, 2020 Door would only open half way. Replaced hinge bearing and ramp. Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers, Socket Set
Arthur F Windcrest , TX October 28, 2023 Appliance: Electrolux Freezer FFVU21F4QWA The freezer door would not open completely since the hinge bearing was broken. I went online and determined the parts I needed from the sites online diagram and ordered the parts, when they arrived at the house, I removed the door which consisted of taking out two screws and two bolts. I pulled off the broken part by hand, cleaned the area with a paper towel and pushed in the new part. I also cleaned the lower grill on the front of the freezer since I had removed it. Lightly greased the surface of the parts and set the door back in place. Reattaching the two bolts and two screws and all was working as it should. I'm happy, the wife is happy and the cost for parts and shipping was only $32.47. No way could have hired a repair tech to do this work for anything close to this cost. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Screwdrivers
Timothy A E Greeley , CO March 26, 2022 Appliance: Kenmore Freezer 25370722410 Both the hinge bearing and ramp were damaged. Both the Hinge Bearing and Ramp were damaged. The door would still open and close, but it was not smooth and if you needed to open the fridge door full open, you needed to push past the damaged parts. Emptied the door. Removed the top door hinge by removing the plastic cover and two screw bolts with a ratchet socket. Lifted door off of the metal pin. The screw's head that held the ramp in place was damaged. Cut away the old ramp and was able to get a vice grip on the screw head and back it out. Replaced Hinge Bearing and screwed down new Ramp. Cleaned lube grease off of metal Pin, put new grease on Pin, Lifted door back onto Pin. Bolted down the top door hinge and replaced the plastic cover.j The door is now opening and closing nice and smooth. Helped to have a buddy steady the door while I replaced the top door hinge bolts. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers, Socket Set