Frigidaire Room Air Conditioner Parts

This air filter screens the air moving through your appliance's ventilation system, capturing odors and fine particles. Replacing a clogged or damaged filter helps maintain proper airflow so the unit vents and circulates air as designed. What it does:

• Captures odors and airborne particles as air passes through the unit
• Helps maintain proper airflow/venting performance
• Reduces debris buildup on internal components
• Common signs it's due: persistent odors, reduced airflow/venting, a visibly dirty or damaged filter

• 1 air filter

• Disconnect power and allow hot surfaces to cool before servicing
• Open the filter access panel or grille and note the filter's orientation
• Remove the old filter; seat the new filter fully and close the cover
• Restore power and verify proper airflow

This replacement exhaust hose vents hot discharge air from a portable air conditioner through the window kit, restoring proper airflow and cooling performance when the original hose is cracked, collapsed, leaking, or missing.

• Directs hot air from the unit to the outdoors via the window panel
• Helps maintain correct airflow and cooling efficiency
• Replaces a damaged, brittle, or collapsed vent hose
• Symptoms may include poor cooling, warm air leaking into the room, or the hose detaching

• Unplug the unit and allow it to cool before service
• Remove the old hose from the rear outlet and window panel couplers
• Seat and lock the new hose fully onto each coupler per your model's design
• Route the hose as short and straight as possible; avoid kinks or sharp bends for best airflow

The Starter is an OEM replacement part for Frigidaire refrigerators. This component is crucial for initiating the compressor, which is responsible for cooling the refrigerator. The starter works by providing the necessary electrical power to get the compressor running, ensuring that the refrigerator maintains the correct temperature.

Causes of a bad starter can include electrical malfunctions, wear and tear over time, or damage from power surges. A faulty starter can prevent the compressor from starting, leading to cooling issues.

Symptoms of a bad Starter include:

• The refrigerator not cooling properly
• The compressor not running or frequently cycling on and off
• Unusual clicking or buzzing noises from the compressor area
• The refrigerator being warmer than usual or food spoiling quickly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This air filter features a durable plastic frame and screens airborne particles from intake air to help protect internal components. Replacing a cracked or heavily clogged filter helps maintain proper airflow and keep the appliance running efficiently. What it does

• Captures dust and lint from incoming air to reduce buildup inside the unit
• Helps maintain airflow and overall system efficiency
• Replaces a missing, damaged, or saturated filter
• Common symptoms: weak airflow, longer run times, visible dirt buildup or damage to the filter

• 1 air filter with plastic frame

• Disconnect power to the appliance before servicing
• Open the front grille or filter access panel per your owner's manual
• Slide out the old filter and insert the new filter in the same orientation
• Ensure the filter is fully seated; do not operate the unit without a filter

This replacement filter helps capture airborne particles during normal operation, protecting internal components and supporting proper airflow and performance. Replace a damaged or clogged filter to keep your appliance working efficiently and safely.

• Traps dust, grease, and debris from the airstream to protect the blower and internal parts
• Helps maintain proper airflow for effective ventilation and performance
• Replace if the filter is torn, saturated, misshapen, or heavily clogged
• Common symptoms of a worn filter include reduced airflow, lingering odors, and increased fan noise

• Disconnect power to the appliance before servicing
• Allow hot surfaces to cool; wear cut-resistant gloves—edges can be sharp
• Note the orientation of the old filter and seat the new one the same way
• Restore power and verify airflow after installation

This replacement capacitor stores and releases electrical energy to support proper operation of the appliance's circuit. Replacing a weakened or failed capacitor restores reliable startup and smooth performance in the affected component.

• Stores electrical energy and delivers a brief boost during startup as designed by the circuit
• Helps stabilize operation, reducing humming, stalling, or overheating from a weak capacitor
• Common signs include motors that hum but won't start, intermittent operation, breaker trips
• Visual clues of failure: swollen case, leaking oil, or burnt odor

• Disconnect power and verify no voltage is present before servicing
• Properly discharge the old capacitor using safe, approved procedures
• Note wire positions or take a photo; transfer leads to the matching terminals securely
• Mount securely in the existing bracket/strap; keep terminals clear of contact and test operation

This handheld remote control lets you operate compatible Frigidaire appliances from a distance, restoring convenient control of modes, temperatures, and timers without touching the main unit. What it does:

• Sends remote commands to the appliance so you can change modes, fan speed, temperature, or timers from across the room
• Replaces a lost, cracked, or unresponsive remote to regain full remote functionality
• Helps when the appliance doesn't respond to the existing remote or when buttons stick or fail
• Uses standard battery power

• One handheld remote control

• Insert fresh batteries and aim the remote at the appliance's IR receiver; check batteries first when troubleshooting
• Re-pairing or simple setup may be required per the appliance owner's manual—follow OEM instructions if prompted
• Keep remote dry and avoid dropping; remove batteries if storing long-term
• Recycle or dispose of old batteries and electronics according to local regulations

This refrigerator water filter removes common impurities from the ice and water supply so you get cleaner-tasting water and clearer ice. Designed to fit inline/replaceable filter housings used in many Frigidaire refrigerators. What it does:

• Reduces chlorine taste and odor for improved drinking water flavor
• Helps reduce sediment and particulates that can affect ice clarity
• Keeps water flowing properly when replaced as part of routine maintenance
• Addresses symptoms like cloudy ice, bad-tasting water, or reduced water quality

• One replacement refrigerator water filter cartridge

• Replace filter according to your refrigerator manufacturer's instructions; typically twist or push in to seat and lock
• Run several gallons of water through the dispenser after installation to flush the system and remove loose carbon fines
• If water flow is restricted after installation, check filter orientation and seating; do not force
• For safety, disconnect power to the appliance before accessing internal filter housings

Black

This capacitor helps start and run the refrigerator's compressor and/or fan motors so the appliance cools reliably. Replaces a worn or failed capacitor to restore normal motor operation and reduce hard-starting. What it does:

• Provides the initial electrical boost motors need to start turning
• Helps maintain steady motor speed during operation
• Commonly linked to symptoms like compressors that hum but don't start
• Needed if refrigerator cycles frequently or cooling is inconsistent

• One capacitor

• Disconnect power before accessing electrical components
• Discharge the capacitor before touching terminals to avoid shock
• Verify wiring and terminal orientation before reconnecting

This refrigerator water filter cartridge replaces a clogged or expired filter to help improve the taste and clarity of drinking water and ice. It provides basic carbon filtration to address common taste and odor issues. What it does:

• Filters water for the dispenser and ice maker to help reduce common taste and odor problems.
• Helps trap sediment and particulates that can cloud ice or affect flavor.
• Restores proper water flow and dispenser performance when an old filter is restricted.
• Supports fresh-tasting drinking water between scheduled filter changes.

• Turn off the water supply to the refrigerator per the manufacturer's instructions before replacing the filter.
• Remove the old cartridge following OEM guidance; install the new filter until it seats or clicks into place.
• Flush the new filter by dispensing water until it runs clear.
• Inspect for leaks after installation and replace on the schedule recommended by the refrigerator manufacturer.

This replacement plug/cap seals an unused opening or access hole on compatible Frigidaire appliances to stop drafts and moisture while keeping internal components secure. It restores a finished appearance and prevents debris from entering. What it does:

• Seals access holes or service openings to help prevent water or air intrusion
• Secures wiring or tube routing by closing unused ports
• Helps keep out dust, pests and debris from internal compartments
• Common symptoms indicating replacement: missing or loose plug, visible gap, or water/draft at the opening

• One replacement plug/cap, as shown

• Disconnect power to the appliance before beginning any work
• Typically installs as a press-fit or snap-in component; no special tools required
• Inspect surrounding area for damage before installing; do not force into place

A handheld replacement remote that restores convenient, wireless control of your appliance's basic functions — power, mode, temperature and fan settings — without needing to access the control panel directly. What it does:

• Sends wireless commands to the appliance to change power, temperature, fan speed and operating mode
• Replaces a lost, damaged or non-working remote to restore remote operation
• Helps diagnose remote-related control issues by providing a working transmitter for testing
• Works with the appliance's front-panel receiver; operation depends on line-of-sight and fresh batteries

• Install fresh batteries before first use and follow the appliance manual to pair or sync if required
• Point remote at the appliance's IR/receiver window and test functions at close range first
• Keep remote dry and avoid dropping; handle electronic parts with care
• Dispose of batteries and packaging according to local regulations

This drain kit replaces a damaged or clogged drain assembly to restore proper water removal from the appliance, helping prevent pooling and reduce leak risk. Designed to match OEM fit for straightforward replacement. What it does

• Channels melt or condensate water away from the appliance to the designated drain location
• Replaces cracked, split, or clogged drain tubing and worn fittings
• Helps stop minor leaks and water buildup that can cause odors or operational issues
• Restores proper drainage function after damage or wear

• Disconnect power to the appliance before starting any repairs; follow all safety precautions
• Basic hand tools are typically required; refer to the appliance service manual for step-by-step guidance

A handheld replacement remote control that restores convenient, wireless operation of your appliance's basic functions. Use it to power the unit on/off and change settings from across the room without touching the control panel. What it does:

• Sends wireless commands to the appliance to control power, temperature, fan speed, and mode selection.
• Replaces a lost, damaged, or unresponsive remote to regain full remote operation.
• Uses standard batteries.

• Insert fresh batteries before first use and follow the appliance's pairing or sync procedure if required.
• Keep remote dry and avoid dropping; do not attempt to open or service the remote—replace if internal damage is suspected.
• Dispose of batteries properly and remove batteries if storing the remote for extended periods.

This replacement remote control restores convenient handheld operation of your appliance, letting you change settings and control basic functions from a short distance without opening the unit. Easy swap for a failed or missing remote. What it does:

• Sends control commands to the appliance so you can change modes, power, and settings remotely
• Restores normal remote response when the original remote is lost, damaged, or unresponsive
• Helps diagnose whether issues are remote-related versus appliance-related by verifying signal/send function
• Works only with compatible appliance models that use this OEM remote protocol

• Insert fresh batteries and test remote operation before installation
• Follow the appliance manufacturer's pairing or setup procedure if required
• If remote still does not operate the appliance, check battery orientation and replace batteries, then refer to the appliance's user manual
• Dispose of used batteries properly and avoid exposing the remote to moisture or extreme heat