Frigidaire 131168200 Screw (8-18 Thread) OEM Part

It was easy to find the part on appliance parts pros. Once I found it I studied the diagram and determined that there were 3 screws in the drum that needed to be removed. I disconnected power and then removed 3 interior screws. Once I did that I removed the back cover and removed the single screw on the bottom side of the air duct that held it in place connected to the heat tube. I then reversed disassembly. I want to tell you this is a 2 person job. In order to assemble it you need to have some one hold the air duct in place to get the 3 interior screws in place. I was by myself so I ended up using 4 long strips of duct tape to hold it in place until I got the 3 interior screws in. I then closed up the back, reconnected power and ran a test run for about 15 minutes. Everything worked.

Replaced outer door glass, handle and hinges. The washing machine is working great.

Swapped out the nylon bearing cup. Easy. Also changed out the felt bands on the dryer door edge. Even easier. Be careful taking the cabinet apart as the inside edges are SHARP !! Also removed and added new exhaust tubing as the existing one was filled with lint.

Ordered new moisture sensor from AppliancePartsPros.com had new sensor installed and dryer running in less than five minutes,also had a very happy mom too!!

Replaced parts.