Frigidaire 5303912606 Spark Module OEM Part

Tappen Gas Stove circa 1981 (uses Fridgidaire parts). Unplugged stove from 110 wall outlet. Spark control module located on back side of stove about mid-way down on left side under a black cover that juts out. Black cover had 2 phillips head screws...removed the black cover and the spark module was right there...held on by 2 additional phillips screws. Sprark module purchased was identical to old one on the stove. Removed each wire, one at a time from the old spark module (slide off) and placed on the new module (slide on) in the corresponding location (module is clearly marked). . After all the wires were on the new module, plugged the stove back in and tested each burner ignitor and all worked as it should. Secured spark module back on the stove with the 2 phillips screws and replaced the black cover with the 2 phillips screws. Done. I also purchased new burner grates and drip pans which were identical to the old ones and fit perfect. Old stove looks and works great now.

Replaced the spark module. I have never given feedback about an online vendor before, but the positive experience with Appliance Parts Pros warrants the highest recommendation. Firstly, my broken part no. was cross-referenced at APP (online), even though a live rep with a large local supplier could not. Then, most surprisingly I received the part the next day following an online order! Replacing the part was a no-brainier but getting it so quickly was special. Eric

Thermadore had smaller wire terminals on one set so splice in wire and used larger wire terminals with new module from Electrolux/frigidare and everything worked out-- Even though new spark module was not listed as compatible could make it work by altering wire terminals.

I went to the Tappan web site, looked at the schametic, and found the part I needed. It was a simple matter of ordering the part and replacing it.

I replaced the Spark Module.