Parts for Briggs & Stratton 122437-0163-E8: Fuel Supply Parts

This is a genuine intake gasket replacement that is designed for use in certain lawn mower engines. This specialty intake gasket is what is responsible for creating the seal between the carburetor and the breather tube so that no gases or fluids leak when they pass between the two. This gasket is subjected to constant high pressure, vibrations, and extreme temperatures, and over time it will need replaced. Gaskets are generally considered a part of routine maintenance on most engines, and many owners will choose to keep a few extra on hand in case of an urgent repair need. This genuine OEM intake gasket is manufactured by Briggs & Stratton and designed to offer an identical replacement for the original gasket that came on the new unit. It is compatible with lawn mower engines in models from Briggs & Stratton and Toro, and will fit on over 150 different engine models in lawn mowers from these brands. The intake gasket is made of durable composite material. It is also a good idea to replace gaskets when servicing the carburetor to ensure a proper seal after reassembly. Be sure to use the right tools to install this part so that it isn't damaged in the process.

This replacement part is a carburetor overhaul kit. This kit includes multiple parts that are needed to rebuild or repair a damaged carburetor.Be sure to diagnose the issue before purchasing this kit to ensure that the needed parts are included. A damaged carburetor may cause hard starting or black smoke exhaust during use. Wear work gloves when working with the carburetor. The engine should be powered down and cooled off before starting this job.This is a genuine OEM replacement part manufactured by Midwest Engine. This part is sold individually.

This part is a replacement float bowl gasket. This is a genuine OEM part made by Midwest Engine and has been sourced directly from the manufacturer. This part is intended for use as a replacement in a snapped, worn, or otherwise defective float bowl gasket in various engines. This float bowl gasket seals the gap between the float bowl and the carburetor, which helps to prevent fuel from leaking. Gaskets are particularly subject to wear and tear, and over time will become weathered, brittle, or otherwise deteriorated, thus requiring replacement. If you notice fuel leaking from the engine, this gasket may need to be replaced. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this float bowl gasket, the appropriate owner's manual and equipment diagrams should be referred to. This float bowl gasket is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with small engines that have been manufactured by Midwest Engine and Briggs and Stratton.

An air cleaner gasket is a valuable barrier between the carburetor of a machine and the air filter. This air cleaner gasket is made out of durable composite material. It is designed for use with outdoor lawn and garden power equipment such as lawn mowers, snowblowers, tillers, leaf blowers, and wood chippers. It is compatible with products by brands such as Briggs & Stratton, Toro, Cub Cadet, Snapper, and Simplicity.The air cleaner gasket part is crucial to the health and longevity of the machine's engine. The purpose of the air cleaner gasket is to help seal and protect the engine, the air cleaner, and other internal systems from dirt, contaminants, and debris that can often become the source of engine problems.The proper gasket for each user's engine depends entirely on the engine's design. That's why it is strongly recommended that users check their engine's Illustrated Parts List and refer back to their owner's manuals before making any decisions. This air cleaner gasket is an original OEM part sourced directly from the manufacturer, Midwest Engines. It is sold individually.

This fuel line is a genuine OEM replacement for select Briggs & Stratton engines. The fuel line is responsible for delivering fuel to the carburetor from the fuel tank. Over time and with regular use, the fuel line can become brittle or worn, causing cracks or breaks that require a replacement. If a leak is noticed or if the machine seems to be using too much fuel, there may be an issue with the line. This fuel line replacement provides an exact fit for compatible engines. This fuel line is manufactured to exact standards and designed to fit various lawn and garden equipment engines, including pressure washers, generators, snowblowers, and lawn tractors. There are more than 150 machines with compatible engines for this fuel line, including those from Briggs & Stratton, Toro, Murray, Snapper, Troy-Bilt, Husqvarna, Simplicity, and Vanguard. It is cut to fit for an exact fit and includes a ¼-inch diameter on the interior and a ½-inch diameter on the exterior. The fuel line also comes with replacement clips. It is sold as an individual part and made of durable, high-quality rubber with coated metal clips for a secure fit.

An in-line fuel filter prevents contaminants from entering the carburetor and engine. In any engine, if the in-line fuel filter becomes clogged for whatever reason, the fuel cannot flow freely to the carburetor. This can prevent the engine from starting or may shut off the engine during operation when the fuel supply is interrupted. Without any gas, the engine cannot run. Any number of things can cause the filter to become clogged. Examples of typical clogging culprits are lawn clippings, mulch, stones or rocks, or contaminants from poor-grade fuel. If your engine stops or won’t start up, remove the old in-line fuel filter, and replace it with the new one. If this does not fix your problem, the carburetor may need cleaning or replacement due to damage from the contaminants, as well. The outside material of this fuel filter is plastic, while the inside material is comprised of a filter component interior. This in-line fuel filter is manufactured by Briggs & Stratton. It is compatible with engines on lawnmowers, lawn tractors, snowblowers, and generators manufactured by Briggs & Stratton, Craftsman, Cub Cadet, Murray, MTD, Simplicity, Snapper, Toro, and Troy-Bilt. It is for engines that are supplied fuel by way of a fuel pump. This is a genuine OEM part and is sold separately as a replacement.

This sealing washer is a genuine Midwest Engine part, sold individually. This sealing washer can be used as a replacement part for a variety of small engine outdoor appliances including chipper shredders, lawn mowers, and tillers. The purpose of a sealing washer is to create space between fastening components so they are not damaged by friction.The sealing washer of an outdoor appliance might have to be replaced if it is lost, misplaced, or damaged to the point that it cannot serve its function. The sealing washer could be stripped over time from general wear and tear or, as it is a small part, can be lost or misplaced easily. If this occurs, the component should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This sealing washer is compatible with the following outdoor appliance brands: Midwest Engine, Briggs & Stratton, and Cub Cadet.

A hose clamp serves the basic purpose of holding together two connecting hoses. This is a crucial job in an engine. Since there are so many connecting tubes and hoses transferring oil and fuel within an engine, a leak could prove catastrophic. It could not only cause the engine to malfunction but could also become a fire hazard. Replacing a hose clamp is an easy job, though the exact process will depend on where the connection is located. A pair of pliers may be needed. This is a genuine OEM replacement part and will work with a wide range of appliances, such as pressure washers, engines, generators, tractors, mowers, blowers, shredders, and chippers from Murray, Toro, Briggs & Stratton, Snapper, MTD, Lawn-Boy, or Simplicity. This part ships individually.

This is a genuine replacement fuel tank cap for select Briggs & Stratton engines. It seals the fuel tank to keep the fuel contained and also to create the pressure required to run the fuel system and lead to the combustion process. The fuel cap screws onto the fuel tank and can become worn over time. The cap can also become damaged due to an impact or another incident. In some cases, the cap can get lost or the threads can break or strip entirely. A replacement cap like this one can be the solution for compatible models. This OEM fuel tank cap is manufactured to specific standards by Briggs & Stratton and will fit select models of vertical and industrial engines, including 3.5, 5, 7, 9, and 12.5 HP models. It can also be used on select Toro, Murray, Simplicity, and Snapper models that have a Biggs & Stratton engine and/or fuel tank. The non-vented cap ensures appropriate sealing and fuel containment, and it is made of durable composite plastic material. This fuel tank cap is sold individually. No tools are required to replace this part.

This is a fuel cut-off value that is used in over 150 different small gasoline-powered engines. Those devices that have this value include power vacuums, leaf blowers, pressure washers, and generators. The fuel cut-off valve is a safety feature that sits on the bottom of the fuel tank. In situations where the engine must be cleared of gasoline, this valve is very useful. It allows the gasoline in the fuel line to continue to the carburetor and to be combusted in the cylinder. Once the engine block is drained of gasoline, no further ignition of fuel is possible until the cut-off is reactivated. Although it is out of the way of casual contact, the cut-off can be bumped and damaged by contact with other tools, hoses, or debris. Also, since it is a narrow passage through which gasoline passes, it is possible for contaminants to jam the flow and create a blockage. If the tank is full of gasoline and the carburetor is functioning normally, an engine that won't offer to start at all may be the victim of a faulty cut-off fuel valve. This OEM genuine replacement is compatible with Toro and Briggs and Stratton engines.