Parts for Briggs & Stratton 303442-1069-E1: Fuel Supply Parts

This is a cylinder head gasket. It is a genuine Midwest Engine part. It is a replacement part for lawn mowers and lawn tractors. It may also be used with certain models of wood chippers, snowblowers, and other small engines.The cylinder head gasket is located between the cylinders and the engine block. It prevents substances such as oil and coolant from leaking or mixing improperly. It may become damaged through normal wear and tear. It is dangerous to operate a machine without a properly functioning cylinder head gasket. Some disassembly of the deck and engine is required to make this repair.This cylinder head gasket is a genuine OEM part that is sourced directly from the manufacturer. It is sold individually. It is made to be compatible with mowers and tractors manufactured by Briggs and Stratton, Simplicity, Toro, Snapper, and Cub Cadet.

This fuel line is a genuine OEM replacement for select Briggs & Stratton engines. The fuel line is responsible for delivering fuel to the carburetor from the fuel tank. Over time and with regular use, the fuel line can become brittle or worn, causing cracks or breaks that require a replacement. If a leak is noticed or if the machine seems to be using too much fuel, there may be an issue with the line. This fuel line replacement provides an exact fit for compatible engines. This fuel line is manufactured to exact standards and designed to fit various lawn and garden equipment engines, including pressure washers, generators, snowblowers, and lawn tractors. There are more than 150 machines with compatible engines for this fuel line, including those from Briggs & Stratton, Toro, Murray, Snapper, Troy-Bilt, Husqvarna, Simplicity, and Vanguard. It is cut to fit for an exact fit and includes a ¼-inch diameter on the interior and a ½-inch diameter on the exterior. The fuel line also comes with replacement clips. It is sold as an individual part and made of durable, high-quality rubber with coated metal clips for a secure fit.

An in-line fuel filter prevents contaminants from entering the carburetor and engine. In any engine, if the in-line fuel filter becomes clogged for whatever reason, the fuel cannot flow freely to the carburetor. This can prevent the engine from starting or may shut off the engine during operation when the fuel supply is interrupted. Without any gas, the engine cannot run. Any number of things can cause the filter to become clogged. Examples of typical clogging culprits are lawn clippings, mulch, stones or rocks, or contaminants from poor-grade fuel. If your engine stops or won’t start up, remove the old in-line fuel filter, and replace it with the new one. If this does not fix your problem, the carburetor may need cleaning or replacement due to damage from the contaminants, as well. The outside material of this fuel filter is plastic, while the inside material is comprised of a filter component interior. This in-line fuel filter is manufactured by Briggs & Stratton. It is compatible with engines on lawnmowers, lawn tractors, snowblowers, and generators manufactured by Briggs & Stratton, Craftsman, Cub Cadet, Murray, MTD, Simplicity, Snapper, Toro, and Troy-Bilt. It is for engines that are supplied fuel by way of a fuel pump. This is a genuine OEM part and is sold separately as a replacement.

This fuel pump is a genuine Midwest Engine part, sold individually. This fuel pump can be used as a replacement part or a lawn tractor. The purpose of a fuel pump is to provide a passageway for fuel to channel through the fuel line and into the fuel tank.The fuel pump of a lawn mower or a lawn tractor might eventually have to be replaced in the event that it suffers damage and cannot perform its crucial function. If the fuel pump has been torn, scraped, punctured, or eroded from general wear and tear with long-term use or as the result of a direct impact with a hard object such as a rock or a curb, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This fuel pump is compatible with the following outdoor appliance brands: Midwest Engine, Briggs & Stratton, Cub Cadet, Simplicity, and Toro.

A hose clamp serves the basic purpose of holding together two connecting hoses. This is a crucial job in an engine. Since there are so many connecting tubes and hoses transferring oil and fuel within an engine, a leak could prove catastrophic. It could not only cause the engine to malfunction but could also become a fire hazard. Replacing a hose clamp is an easy job, though the exact process will depend on where the connection is located. A pair of pliers may be needed. This is a genuine OEM replacement part and will work with a wide range of appliances, such as pressure washers, engines, generators, tractors, mowers, blowers, shredders, and chippers from Murray, Toro, Briggs & Stratton, Snapper, MTD, Lawn-Boy, or Simplicity. This part ships individually.

This is a genuine replacement fuel tank cap for select Briggs & Stratton engines. It seals the fuel tank to keep the fuel contained and also to create the pressure required to run the fuel system and lead to the combustion process. The fuel cap screws onto the fuel tank and can become worn over time. The cap can also become damaged due to an impact or another incident. In some cases, the cap can get lost or the threads can break or strip entirely. A replacement cap like this one can be the solution for compatible models. This OEM fuel tank cap is manufactured to specific standards by Briggs & Stratton and will fit select models of vertical and industrial engines, including 3.5, 5, 7, 9, and 12.5 HP models. It can also be used on select Toro, Murray, Simplicity, and Snapper models that have a Biggs & Stratton engine and/or fuel tank. The non-vented cap ensures appropriate sealing and fuel containment, and it is made of durable composite plastic material. This fuel tank cap is sold individually. No tools are required to replace this part.

This valve fuel shut off is a genuine Midwest Engine replacement part for outdoor appliances with small engines, such as lawn mowers, leaf blowers, chipper shredders, and snowblowers. The valve fuel shut off serves as a basic safety and maintenance feature which temporarily blocks fuel from reaching the engine. This valve might be used when performing work on the engine, when transporting the appliance, or to generally prevent oil leakage and flooding in certain scenarios.The valve fuel shut off could be subject to damage in the long-term from general use. If there is oil inexplicably found leaking into the carburetor, the float chamber, or the intake valve, thereby causing engine damage or hydraulic lock, there might be damage in the valve fuel shut off. If that is the case, this genuine OEM replacement part will be essential. Remember to always wear gloves when handling, repairing, and operating outdoor equipment.This valve fuel shut off is compatible with the following brands: Briggs and Stratton, Toro, Cub Cadet, and Simplicity. This part is individually sold and any additional parts needed will have to be purchased separately.