Gardenway Parts

This replacement part is an auger shaft. This is a genuine replacement part made by MTD. This part is typically found in snowblowers or leaf blowers. This auger shaft helps connect certain parts of the machine together so that the user may operate it effectively. A new auger shaft might be needed if the current one is damaged at all. This can include being dented, bent, or cracked. After many years of normal use it is not uncommon for this part to need replacing or repairing. Be sure to wear work gloves while taking care of this part to prevent injury. It is also recommended that the engine to the appliance be powered down before beginning this job. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This nut is a genuine MTD part, sold individually. This nut can be used as a replacement part in lawnmowers, snowblowers, tillers, string trimmers, and chainsaws. The purpose of the nut for one of these outdoor appliances is to serve as a fastening component, in conjunction with a bolt, to secure one or more components to other components within the internal mechanisms of the appliance.The nut in a small engine outdoor appliance might have to be replaced if the small component is lost, misplaced, or damaged. If the nut goes missing during the standard operation of the appliance or if the nut is stripped away from general wear and tear with long-term use, the nut should be replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This nut is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Huskee, Montgomery Wards, Yard-Man, and MasterCut.

This replacement part is a speed nut. It is a type of fastener that ensures equipment components remain securely in place.A new speed nut might be needed if the current one is missing or damaged in any way. This can be from normal wear and tear over time or a singular incident that caused the part to no longer work. Damage can include being dented, cracked, or stripped down. If the speed nut can no longer stay in place, be sure to replace it. This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This replacement part is an impeller shaft. It is a genuine replacement part made by MTD. Impeller shafts are able to rotate at high speeds and assist the engine in operating smoothly and effectively during use. If this part is not working properly it is possible that the engine might not work either.A new impeller shaft might be needed if the current one is damaged or missing. If the engine is not working properly, it can be because of the impeller shaft. Be sure to wear working gloves while replacing this part as the impeller can be sharp and dangerous if handled. Refer to the specific user manual for more information on how to replace this part. This part is a genuine OEM replacement part to ensure long-lasting use and proper fit. This impeller shaft is sold individually and is sourced directly from the manufacturer.

This actuator spring is a genuine MTD part, sold individually. This actuator spring can be used as a replacement part in a lawn mower. The purpose of the actuator spring, also known as a seat spring switch, in a lawn mower is to provide a plate upon which the seat switch can conduct its electrical current while being held stably in place.If the actuator spring slides out of place and cannot be reinstalled or if it is bent, broken, dented, or worn beyond repair, it should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This actuator spring is compatible with the following outdoor appliance brands: MTD, Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Huskee, Montgomery Wards, Bolens, Yard Man, Turf King, and MasterCut.

This mulch plug is a genuine MTD part, sold individually. This mulch plug can be used as a replacement part in a lawn mower. The purpose of the mulch plug for the lawn mower is to mulch the grass clippings assembled into the grass catching bag during the operation of the lawn mower so that the mulch can be spread across the lawn or garden surface with the intent of keeping the greenery healthy.The mulch plug in a lawn mower might have to be replaced if it suffers damage to the point that the grass clippings cannot be finely chopped into mulch. This could occur if the mulch plug is punctured, scraped, dented, cracked, warped, or eroded. If this occurs, the mulch plug should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This mulch plug is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Montgomery Wards, and Yard Man.

This axle cap is a genuine MTD part, sold individually. This axle cap can be used as a replacement part for a lawn mower. The purpose of the axle cap is to provide covering and protection for the axle.The axle cap might have to be replaced at some point in the lifespan of the lawn mower if it is compromised or damaged to the point that it cannot protect the axle. If the axle cap is chipped, cracked, punctured, or eroded, the component should be removed and replaced by this genuine OEM replacement part so the axle is not subject to any undue damage. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This axle cap is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Yard Machines, Yard-Man, Montgomery Wards, and Huskee.

This replacement part is a control knob. This is a genuine replacement part made by MTD. Control knobs assist the user in maneuvering and controlling certain parts of the machine. A new control knob might be needed if the user is unable to grip the part comfortably and adjust it. This can be due to damages to the part from normal wear and tear or a singular incident. If the part is visibly damaged it is best to replace it right away. Be sure to wear work gloves to avoid injury during a repair or replacement of this part. Overall this should be a simple repair and only require common household tools such as a screwdriver. This is a genuine OEM replacement part which ensures proper fit. This part is sold individually and is sourced directly from the manufacturer.