Jack K Dennis , MA November 15, 2023 Appliance: Model WTG180SSJOWW Water was leaking on the floor. Noticed that the water level did not drop during the "rinse & drain cycle". Took the front off to access the water pump. Found a piece of metal had jammed the impeller and prevented the pump from emptying the tub. Had to remove the inner tub to see where the metal came from. Ordered the special spanner wrench. Your customer service was A+, received the order the next day,WOW! The biggest problem was removing the agitator, it was stuck. Had to use the strap method and found that it was best to pull side to side, not straight up. After removing the agitator I ran into the second problem, I could not remove the inner tub, IT WAS STUCK. I almost gave up but decided to use some Kroil to loosen it up. Kroil is a liquid used for freeing up rusted parts. It took two days of adding the Kroil and digging out the crud below the hub nut that had caused the stuck problem. When the inner tub finally pulled free the problem showed after pulling out the tub. The cast aluminum tub mounting hub was breaking down in pieces, one of which caused my original problem. I found that the original part # WH45X10120 for my washer was no longer available but, I found a similar part # WH45X10027 looked very close to what I needed. So I ordered one, perfect fit. Problem solved. Many thanks to AppliancePartsPros.com for their excellent videos on how to disassemble the washer. Actually, they should note the replacement part that I located as a replacement for the tub mounting hub that is no longer available. It just might help someone to repair their washer rather than having to purchase a new washer. Read More... Do-It-Yourself Rating: Repair Time Estimate: 2+ hours Tools: Nut Drivers, Pliers, Socket Set