Washer Tool

The OEM Replacement Part Spanner Wrench is a specialized tool used for washing machine repairs and maintenance. It is specifically designed for the easy removal of tub nuts, which hold the inner tub in place. It's a must-have tool for do-it-yourself repairs on many brands of washing machines.

The Bearing Installation Tool is an OEM part for Whirlpool washing machines. This tool is specifically designed to aid in the installation of bearings in the washing machine tub, ensuring proper alignment and secure placement.

This tool is essential for replacing worn-out or damaged bearings, which can affect the performance of the washing machine. Over time, bearings can wear out due to continuous usage, exposure to moisture, or heavy loads. Using this tool ensures that new bearings are installed correctly, preventing potential issues caused by misalignment or improper installation.

Symptoms of bad bearings include:

• Loud, grinding noises during the spin cycle
• Excessive vibration or movement of the washer
• Leaks from the tub area
• The drum not spinning smoothly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Used to install the bearings in the bearing and tub seal kit, part number: W10435302. When replacing this part, if you see that your motor stator is broken, search by your model number to make sure you get the right stator for your model.

The Belt Installation Tool is an OEM replacement part for GE washers. It provides the necessary leverage and positioning for hassle-free belt replacement. 

Causes of needing this tool include belts that become cracked or loose over repeated use. Proper belt tension is critical for efficient spinning and drying cycles.

Symptoms of needing this tool include: 

• Vibration or off-center loads during wash or spin cycles
• Slow or ineffective drying 
• Belt slippage that produces a squealing noise

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This spanner wrench is an authentic OEM replacement part sourced directly from the manufacturer. It is used to remove the agitator nut on washing machines. The agitator nut's size and shape make it difficult to access and remove with standard household tools. The spanner wrench is designed with greater torque just for this purpose. If the washing machine's agitator is not working properly or if parts behind it need to be repaired, this wrench makes it easier to remove the nut and then take the agitator out.To use the spanner wrench, slide the center hole over the nut and turn. The hole's location makes turning the spanner wrench simple because it has handles on both sides of the hole and slides over the nut, not around it like many wrenches. Once the agitator has been removed and put back in place, the spanner wrench should be labeled and stored where it is easily accessible for future use.This spanner wrench is made of high-strength black metal and is sold individually. It is designed for use on the agitator nut of washing machines manufactured by General Electric and Hotpoint.

This pliers can be used to remove or install inner and outer door boot seal clamps on LG and Samsung washers as well as washers for other brands including Whirlpool.

Inner tub spring removal tool

This Leg Adjusting Wrench is a simple tool used to turn and secure appliance leveling legs so washers and dryers sit flat and operate quietly. It makes adjusting legs faster and helps reduce rocking and vibration. What it does:

• Fits over standard appliance leveling legs to raise or lower each corner
• Helps stabilize machines to prevent rocking and uneven operation
• Reduces vibration and noise caused by unlevel appliances
• Useful when installing, moving, or re-leveling washers and dryers

• Turn legs slowly and adjust one corner at a time until the appliance sits level.
• Unplug the appliance (and shut off gas supply for gas dryers) before performing major moves or checks.
• Use caution to avoid pinching fingers when lowering legs; keep hands clear of pinch points.
• Check for damaged feet or mounting hardware and replace as needed.

This spring hook tool helps remove and reinstall suspension and drive springs safely and precisely, making spring service or drum suspension work easier and more controlled for technicians and DIYers. What it does:

• Provides a secure hook for grabbing and manipulating washer/dryer springs
• Helps install or remove springs during suspension, tub, or agitator repairs
• Reduces risk of spring slippage compared with improvised tools
• Useful when addressing noisy, off-balance, or uneven-spinning washers caused by spring or suspension issues

• Always disconnect power and water supply before servicing appliances
• Wear eye protection and gloves; springs are under tension and can snap back
• Use the tool only for its intended spring tasks and follow OEM service procedures

This hex wrench is the small hand tool used to turn hex-head fasteners on commercial laundry equipment. It lets technicians and owners loosen or tighten hex screws for service, adjustments, and simple maintenance. What it does:

• Provides a precise fit for hex-head screws and set screws used on appliance panels and components
• Helps secure or remove parts during routine service and repairs
• Useful for adjustments where a hex key is required
• Reduces risk of stripping fasteners when the correct hex tool is used

• Always disconnect power before servicing electrical appliances
• Use the matching hex size to avoid rounding fasteners; apply steady, even force
• Keep the tool and any removed fasteners together to avoid loss during reassembly
• If a fastener is stuck or corroded, avoid excessive force—use penetrating lubricant

Terminal extract tool.