Jim M Iowa Park , TX February 27, 2023 Appliance: Model CFSP3RKBC SS The fan in freezer section of GE Cafe refrigerator was becoming noisy and then the unit quit cooling . Since it is difficult to get to the fans, I decided to replace both and avoid any future problems. I ordered the evap and duct fan motors and replaced both. I ordered the fans expecting it to take a week for delivery. They arrived the next day. The door of the freezer section must be removed, along with its slide rails to get to the cover panel in the rear of the freezer. Once the cover is removed, access to the motors is good and it's just unplug the old motors and plug in the new. I would suggest the ordering of the seal that attaches to the duct fan since it is glued in place and difficult to remove without tearing. Replacing the 1/4" screws in the recessed holes is difficult. I used a small bit of ticky tack putty to hold the screw in the nut driver to start them. Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 2+ hours Tools: Nut Drivers