William A Stuart , FL March 13, 2022 Appliance: Model MONOGRAM ZET1PMSSS Broiler stayed on after reaching preheat temperature. Replaced the relay circuit board. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Screwdrivers
Zev W Los Angeles , CA February 19, 2024 Appliance: Model GE MONOGRAM ZET2PMSS DOUBLE OVEN GE monogram double wall oven overheated for bottom oven only no matter what temperature was set the heating element would go full blast PLEASE NOTE: I am NOT an oven repairman and never attempted doing anything like this. The first attempted solution was to simply replace the temperature sensor. This did not fix the problem. After further online research, I decided to try replacing the relay control circuit board for the bottom oven, which appeared to be the next logical path from the temperature sensor. After turning off the fuse to the oven and removing the front coverings above the lower oven (i.e. between the upper and lower ovens) and carefully removing the existing relay board, I took numerous pictures of the existing wire connections, and continued taking more pictures from various angles as I disconnected the board. I reconnected the wiring to the new circuit board, carefully following my photos. After a brief prayer, I switched back on the fuse and fired up the oven. It worked perfectly! Thanks for the part. Read More... Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Pliers, Screwdrivers, Socket Set