Janet Nordlie N Monument , CO January 25, 2015 Appliance: Model JKP56S0D1SS Replacement oven bulbs wouldn't work Unscrewed front control panel on oven, lifted it and pulled it out from the wiring/control area without disconnecting anything. Disconnected the Halogen Lamp Assembly. Measured 120V at the mating supply connector. Deduced the Halogen Lamp Assembly was therefore bad since it was getting power but wasn't lighting a lamp. Unscrewed the Halogen Lamp Assembly inside the oven and pulled it down a little. Fed the connector of the Halogen Lamp Assembly back into the oven compartment being careful to not disturb the insulation too much. Ordered a new Halogen Lamp Assembly. Fished the connector back up into the wiring/control area and re-connected to the mating supply connector. Screwed the assembly back into place inside the oven. Put the front control panel back in place. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers, Socket Set