Ge WB7X7183 Handle End Cap OEM Part

1) Opened package, 2) unwrapped end-caps, 3) broke off guide pieces with pliers, 4) inserted caps in both end of handle, 4) unscrewed 6 Phillip screws to remove oven-door fascia, 4) unscrewed two end-cap retainer bolts with nut driver to release remnants of broken end-caps, 5) re-inserted bolts back through the oven door engaging the new end-caps on each end, 6) tightened bolts while begging the new end-caps not to break, 7) positioned fascia back over the oven door, 8) restored the 6 screws to secure fascia to oven-door. Other tools: 1)upward pointing flashlight, 2) beer Hazards: 1) unscrewing the top three screws before realizing you have to get down on the floor to find the other three screws, 2) getting down on the floor before realizing you can't see screws without a light that points upward, 3) breaking the new end-caps by over-tightening the bolts, 4) groveling on floor while spouse stands, 5) getting up off the floor while spouse laughs.

I removed end caps installed one end cap fitted handle to this end cap then fitted 2nd end cap to handle then attached this end cap to stove door.

Took off old parts and fastened new ones on. Not as difficult as I thought it would be.

It was very easy!. Just removed the screws off the trim plate and access was right there. The double oven was given to me but the handles were missing and the end caps so I just had to replace them.

Very easy and straight forward. Remove 2 screws from inside door and 2 small locator screws. Replace one side, push handle into the new end and do the same on the other side. Great service and quick shipping. Great company.