Ge WB06X10943 Handle Support OEM Part

After reading other folk's comments on making this repair, I got a good general idea of how to do this repair. Just go slow, take your time. Easier to do this job if door is just removed off the hinge pins.Be very careful with plastic trim frame on inside of door..fragile. I used a penknife to get it started.

Parts came promptly and at a reasonable cost compared to the GE website. No problem doing the repair myself.

I ordered the support. Once we removed the old one, we noticed that the top support was also cracked and so we decided to replace that one as well before it broke off completely. Using a putty knife, I removed the black liner around the inside of the door that exposed the microwave inside the glass. I used a Phillips screwdriver to remove the 4 screws that held the inside glass to the outer door. This exposed the 2 screws that held the handle onto the door. I removed the screws, replaced the supports with the new ones, and re-screwed the handle onto the outer door. I replaced the inner door and secured it with 4 screws. The final step was to snap the black liner back around the glass door. Watching the video helped tremendously and was pretty much what we had to do. I did have a little challenge getting the door back into the hinges.

Have yet to install. looks like it'll be fairly easy. Shouldn't take more than 5 or 10 minutes

Part came in the next day!!! Thank you, thank you !!!