James D San Jose , CA September 01, 2018 Appliance: General Electric Gas Cooktop ZGU385NSM2SS GE gas cook top stopped sparking after a liquid spill on the control knobs. Once I removed all the burners, I could remove the stainless steel cover to access the transformer and switch harness. I had ordered a transformer, switch harness, and LED harness in case I needed all 3. I first replaced the switch harness. Unfortunately, there were no signs of current. I next replaced the transformer and my cooktop was alive again. In my case, I did not need to replace the LED harness. Read More... 21 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Screwdrivers
Vinson M Victor , MT August 13, 2017 Appliance: General Electric Gas Range ZGU385LSM1SS G E Monogram gas stove would not ignite gas burners. I started with replacing the spark igniter module, that did not correct the problem. I then found that the transformer was bad and replaced that, still no spark to ignite the stove. I then wrote Appliance Pros technicians about the problem. They felt it was a bad relay in the Harness with LED assembly. I ordered that part, along with a new Harness switch assembly. I did that because the stove was over 10 years old, and I had now just about rebuilt the inner's of the stove. Upon installation of the two new parts, I finally was able to ignite the stove. I believe the problem started to occur after a very violent thunderstorm with lightning in our area. Anyway problem was fixed, should not have anymore problems for another 10 years.!!! Read More... 4 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Pliers, Screwdrivers, Socket Set