Ge WB14X104 Ranoven Door Hinge OEM Part

I ordered both hinges (if the nylon roller was bad on the left, it was probably going to go bad on the right side as well). The web site was easy to navigate, order process simple. Hinges arrived quickly. Slide the oven door up and off. unscrew the three screws for the hinge. You need to then pull up with some force (there is a big spring in there), and twist the hinge to get the last bit out. I used a hemostat to hold the spring and keep it from falling back into the hole. removed the hinge from the spring, noting which hole it went through. installed new hinge on spring, released the hemostat and reinstalled hinge (just do it all in reverse). Repeat for other side, slide door back on. Now door opens smoothly and easily.

Pull off the door in an upward motion. Remove the spring noting the adjustment hole it comes out of. Remove the hinges three screws. Pull out old hinge and reinsert new one. Reverse the previous steps and your done. Easy fix. Took less than 5min.

Replaced both hinges. I ordered the parts one day, and the parts arrived the next day by fed ex. That's the quickest any company has delivered parts to me. Amazing.. Thank you !!

Ordered both hinges and replaced them by removing the oven door and broiler then spring and then the three screws. Installed the new hinge by putting in the three screws and reattaching the spring in the same hole I had removed it from on the original hinge, which was the bottom hole. Reinstalled the broiler and oven door, all done. I looked on YouTube to ensure I was going to be doing it correctly first.

Replaced the hinges.