Ge WR17X2770 Vegetable Pan Slide OEM Part

Having my model number, it was very easy to find the part I needed. Ordered it. Removed glass, and two screws, to take the whole lowest shelf assembly off. Replaced the broken bracket. Reinstalled. I saw my old one had some foam rubber adhered to it and the new one did not have any. Does not seem to be a problem.

I removed the two drawers, removed the glass shelf, lifted the shelf assembly out of the refrigerator, removed the vinyl from the front assembly to access the front bracket screw and then I removed the rear screw from the bracket. I removed the broken bracket and two broken pieces from the assembly. Then I transferred the foam pad and rubber seal from the broken bracket to the new bracket. I then reversed the steps to install the new bracket, starting by sliding the new bracket into the assembly and putting in the screws, then performing the rest of the steps. A medium size Phillips screwdriver was needed to remove and reinstall two screws.

Ordered replacement parts and by using the parts pro video it took only 15 minutes to repair.

I ordered the parts and they arrived the next day. I was able to install the parts and all is great again! It took a little extra elbow grease to get the screws into the plastic holes, but with after a bit, I succeeded. Very happy with the quality replacement parts and the speed at which it arrived. This is the second time I have used this company, both times with great success.

It was an easy fix. I merely removed the retaining screws from the front and rear of the side rails. To access the front screws, you must take off the cover over the moisture control slides. Remove the damaged rails and reinstalled screws.