Parts for Bolens 25B-550A765 / 2005: General Assembly 2 Parts

This hex screw and lock washer are commonly used with lawn mowers and other small engines to secure a motor to the housing of the equipment. It is machined in such a way that it binds the manifold and frame permanently. There are occasions when these bolts have to be removed, typically when major repairs are performed on the engine. In those cases, users often find it advisable to replace the hex bolts and washers with new ones. It happens as well that these screws are so tightly fastened that they cannot be unscrewed and must be cut off. In those cases, it is necessary to replace the original screws. These replacement screws and lock washers are genuine OEM certified replacements that are manufactured to be identical to the hardware they are replacing. In addition to mowers, these hex screws are used to secure engines to devices such as log splitters, edgers, shredders, trimmers, and snowblowers. This screw is compatible with devices made by Husky, Yard-Man, Cub Cadet, Troy-Bilt, Ryobi, Bolens, and Yard Machines.

This is a flanged lock nut. It’s designed to apply tension, typically on a joint that needs to have a certain amount of flex. As such, it’s mostly used on snowblower chutes and lawnmower handles. They can remain in place, but with a forgiving connection that can take a beating. The nut size is 3/8, with a thread size of 16. A lock nut will generally last for many years. However, the silicone ring inside will wear down if it’s frequently tightened and loosened. It needs to be replaced when it will no longer reliably remain in place. Generally, this begins as a symptom of slight slippage and worsens as time goes on. Thankfully, whether it’s being used on a snowblower or a lawnmower, this nut is generally straightforward to access. Simply unscrew the old nut, then screw the new nut on until it’s nice and tight. Our flanged lock nuts are genuine OEM MTD nuts, and they are sold individually.

This edger blade debris guard, sometimes called an edger guard or simply debris guard, is a genuine MTD part. It is manufactured as a replacement part for several models of edgers, lawn edgers, walk-behind trimmers, edgers, and lawnmowers. The debris guard attaches to the outside of the machine and protects the user from debris created during use.Because the edger blade debris guard is on the outside of the machine, it is not uncommon for it to become damaged during use. It connects to the frame in front of the blade assembly. Since it protects the user, it is very important to replace it promptly. While no disassembly of the deck or engine is necessary for this repair, it is still important to take safety precautions. In addition, be sure to wear protective gloves because the blade is next to the guard.This edger blade debris guard is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with equipment made by Bolens, Craftsman, Yard Machines, Husky, Yard-Man, Troy-Bilt, MTD, and Cub Cadet.

This replacement part is an idler pulley. It is a genuine replacement part made by MTD. This idler pulley is found in different machines that require moving or spinning parts to operate. Pulleys typically aid in the movement between two different parts so that the entire appliance is able to work efficiently. A new idler pulley might be needed if the current one is not working properly or is damaged in any way including being dented or cracked. If the part is not working as well as normal, it could lead to excessive friction between components and eventually overheating or greater damage. If the user notices unusual noises coming from inside of the machine it might be due to a malfunctioning idler pulley. This idler pulley is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This is a replacement lower handle. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken, detached, or otherwise damaged lower handle on a variety of different edger models.This is the lower handle, which secures the upper handle. This part is necessary to enable the user to properly maneuver the equipment. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools are required in order to replace this part. For more accurate information on how and where to install this lower handle, refer to the appropriate owner's manual and included diagrams.As an authentic replacement part, this lower handle is suitable for use on several different models of trimmers manufactured by MTD and Troy-Bilt, Bolens, and Yard Man. This is a genuine part made of high-quality, durable materials and is sold individually.

This is a flanged lock nut. It’s designed to apply tension, typically on a joint that needs to have a certain amount of flex. As such, it’s mostly used on snowblower chutes and lawnmower handles. They can remain in place, but with a forgiving connection that can take a beating. The nut size is 3/8, with a thread size of 16. A lock nut will generally last for many years. However, the silicone ring inside will wear down if it’s frequently tightened and loosened. It needs to be replaced when it will no longer reliably remain in place. Generally, this begins as a symptom of slight slippage and worsens as time goes on. Thankfully, whether it’s being used on a snowblower or a lawnmower, this nut is generally straightforward to access. Simply unscrew the old nut, then screw the new nut on until it’s nice and tight. Our flanged lock nuts are genuine OEM MTD nuts, and they are sold individually.

This genuine OEM replacement part is a push cap designed for snowblower, tiller, and edger wheel assemblies. A push cap is a special type of nut, or fastener, that helps to hold unthreaded shafts in place. Although small, this push cap helps to secure the wheel to the axle. Push caps are most commonly damaged if the operator uses their appliance in rough terrain. If damaged, it can fall off, causing the wheel to also fall off. Replacing push caps is an easy repair as they attach to the outside of the wheel assembly. The only hardware required to make this repair is a nut driver. If you do not have a nut driver, a pair of pliers can also be used to attach the new push cap. This part is a high-quality replacement part meant for Yard Man, Husky, Ryobi, Yard Machines, Troy-Bilt, MTD, Bolens, and Cub Cadet appliances. It is sourced direct from its original manufacturer and ships individually.