Parts for Craftsman 12A-764M099 / 2008: General Assembly Parts

Hex screw fastener for securing lawn mower components. Replace if stripped, rusted, or missing to ensure proper assembly and equipment stability.

Hex head screw for lawn mowers and outdoor power equipment. Replaces damaged, stripped, or missing screws. Essential for secure assembly and repairs.

Flange lock nut secures components on mowers and outdoor power equipment. Replace if stripped, corroded, or missing to restore proper fastening.

Rubber handle grip for lawn mowers, tillers, and snow blowers. Replaces worn, cracked, or missing grips on push equipment handles for better control.

Hex screw for lawn mowers, tractors, and snow blowers. Replaces worn, corroded, or missing screws on engines and housings. Identical fit for secure assembly.

This is a flanged lock nut. It’s designed to apply tension, typically on a joint that needs to have a certain amount of flex. As such, it’s mostly used on snowblower chutes and lawnmower handles. They can remain in place, but with a forgiving connection that can take a beating. The nut size is 3/8, with a thread size of 16. A lock nut will generally last for many years. However, the silicone ring inside will wear down if it’s frequently tightened and loosened. It needs to be replaced when it will no longer reliably remain in place. Generally, this begins as a symptom of slight slippage and worsens as time goes on. Thankfully, whether it’s being used on a snowblower or a lawnmower, this nut is generally straightforward to access. Simply unscrew the old nut, then screw the new nut on until it’s nice and tight. Our flanged lock nuts are genuine OEM MTD nuts, and they are sold individually.

Replace your cracked, worn, or missing lawn mower grip handle. This control handle installs on the handlebar to help you safely operate your machine.

Replacement snap spacer for walk-behind mowers. Maintains proper component spacing and prevents rubbing. Replace if cracked, broken, or missing.

Bell washer adds spacing on shafts in lawn tractors, tillers, mowers, and chipper shredders. Replace if washer is missing, worn, or damaged during maintenance.

Flat washer for lawn tractors and outdoor power equipment. Fits between fasteners and surfaces. Replace if worn, corroded, or missing for proper fit.

Shoulder screw for lawn mowers and tractors. Secures parts in place during operation. Replace if sheared off, stripped, or missing for safe use.

This bearing flange is used on a wide variety of lawnmowers and lawn tractors. Unlike other bearings, the flange bearing is used to ensure the axle assembly stays securely attached to the pivot axle. The purpose of the flange bearing is to make sure the axle is able to move freely and in an effortless manner. The bearing undergoes a large amount of friction and stress while in use, so it can start to wear down.If the lawnmower is showing signs of wear at the flange bearing, it should be replaced. It's a good idea to regularly inspect the part to be sure it is in good shape. To replace the flange bearing, remove the bolt from the steering shaft and remove the old bearing. Grease the new bearing and the shaft before reinstalling the part. Reassemble and tighten all parts.This is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The flange bearing is made to be compatible with lawnmowers created by MasterCut, Yard-Man, Bolens, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Cub Cadet, and Craftsman.

This replacement part is a hex screw, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This screw can be used in a variety of ways depending on the repair needed. Hex screws are similar to normal screws except they have a six-sided head, like a hexagon. A new hex screw might be needed if the current one is damaged or missing. It is common that screws may become stripped or loose overtime, causing them to fall out. If any parts of the lawn mower are becoming loose or falling off, the hex screw might be missing. This replacement should be fairly easy and should only require a screwdriver and possibly pliers. This part is a genuine OEM replacement part and is sold individually. Be sure to purchase the correct amount as some appliances require more than one hex screw.

This is a complete wheel assembly designed for use on a lawn mower. It includes the wheel, tire, and mounting hardware needed for proper installation. Replace this assembly if the existing wheel is cracked, wobbling, has a flat or worn tire, or if the mower is difficult to push and maneuver evenly.

This is a genuine replacement self-tapping hex screw with a blunt nose designed for lawn mowers and lawn tractors. It is used in a variety of locations for the engine assembly of lawn mowers. The self-tapping feature allows the metal screw threads to tightly secure to other metal. The blunt nose requires the use of a pre-drilled pilot hole smaller than the diameter of the screw. These screws do not interchange well. Be sure to check the owner's manual to ensure the correct part number. The hex head needs a socket wrench for the easiest removal and replacement. When removing this type of screw, stripped threads can occur. If this happens, use a screw of the same type in a slightly larger size to accommodate for the damage. Typically, this type of screw would need to be replaced when removed to access another part of the lawn mower for replacement, such as the carburetor. This an OEM part sourced directly from the manufacturer and is sold individually. This screw fits products by Bolens, Brute, Columbia, County Line, Craftsman, Cub Cadet, Huskee, Huskee Supreme, MTD Black, MTD Gold, Mastercut, Murray, Troy Bilt, Yard Man, & Yard Machines.

Secures hoses on outdoor power equipment to prevent leaks and maintain proper fluid flow. Replace if loose, corroded, or damaged. Verify fit with your model.